How To Take Apart Smith And Wesson 9mm?

How to Take Apart a Smith & Wesson 9mm

The Smith & Wesson 9mm is a popular handgun for self-defense and target shooting. It’s a reliable and accurate pistol that’s easy to use, but it’s important to know how to properly take it apart for cleaning and maintenance. In this article, we’ll walk you through the steps of disassembling a Smith & Wesson 9mm, so you can keep your pistol in top condition.

We’ll start by discussing the safety precautions you should take before you begin, and then we’ll move on to the step-by-step disassembly process. By the end of this article, you’ll be able to take apart and reassemble your Smith & Wesson 9mm with ease.

Step	Instructions	Image
1	Ensure the pistol is unloaded.
2	Depress the slide lock and pull the slide back until it is in the locked position.
3	Grasp the slide and pull it forward and off of the frame.
4	Remove the recoil spring assembly from the slide.
5	Remove the barrel from the slide.

How To Take Apart a Smith & Wesson 9mm

Tools and Materials

• Smith & Wesson 9mm pistol
• Cleaning kit (or rags, solvent, and oil)
• Safety glasses
• Hammer
• Punch
• Screwdriver
• Allen wrench

Safety Precautions

• Always keep the gun pointed in a safe direction.
• Make sure the gun is unloaded before you begin disassembly.
• Wear safety glasses to protect your eyes from flying debris.

Step-by-Step Instructions

1. Remove the magazine from the pistol.
2. Depress the slide lock and pull back the slide to lock the slide open.
3. Remove the barrel bushing screw with a screwdriver.
4. Remove the barrel bushing from the slide.
5. Remove the barrel from the slide.
6. Remove the recoil spring assembly from the slide.
7. Remove the extractor from the slide.
8. Remove the firing pin from the slide.
9. Remove the firing pin spring from the slide.
10. Remove the trigger assembly from the frame.
11. Remove the hammer from the frame.
12. Remove the sear from the frame.
13. Remove the disconnector from the frame.
14. Remove the magazine catch from the frame.
15. Remove the slide stop from the frame.

Reassembly

1. Reassemble the slide stop in the frame.
2. Reassemble the magazine catch in the frame.
3. Reassemble the disconnector in the frame.
4. Reassemble the sear in the frame.
5. Reassemble the hammer in the frame.
6. Reassemble the trigger assembly in the frame.
7. Reinsert the firing pin spring into the slide.
8. Reinsert the firing pin into the slide.
9. Reinsert the extractor into the slide.
10. Reinsert the recoil spring assembly into the slide.
11. Reinsert the barrel into the slide.
12. Reinsert the barrel bushing into the slide.
13. Reinsert the barrel bushing screw.
14. Reinsert the slide lock.
15. Reinsert the magazine.

Disassembling and reassembling a Smith & Wesson 9mm pistol is a relatively simple process. By following these step-by-step instructions, you can safely and easily maintain your firearm.

How To Take Apart a Smith & Wesson 9mm

This guide will show you how to safely disassemble a Smith & Wesson 9mm pistol. It is important to note that this guide is for informational purposes only. Always refer to your firearm’s owner’s manual for specific instructions on how to disassemble your particular model.

Disassembly Steps

1. Remove the magazine.

2. Lock the slide back.

3. Remove the slide stop.

4. Remove the slide.

5. Remove the barrel.

6. Remove the recoil spring and guide rod.

Removing the Magazine

1. Press the magazine release button located on the left side of the frame.
2. Grasp the magazine and pull it straight out of the pistol.

Locking the Slide Back

1. Depress the slide stop lever located on the left side of the frame.
2. Pull the slide back until it locks into place.

Removing the Slide Stop

1. Using a small tool, depress the slide stop spring plunger located on the right side of the frame.
2. While depressing the spring plunger, use a small screwdriver to pry the slide stop out of its recess.

Removing the Slide

1. With the slide locked back, grasp the front of the slide and pull it forward and off of the frame.

Removing the Barrel

1. Rotate the barrel counterclockwise until it is aligned with the ejection port.
2. Pull the barrel straight out of the slide.

Removing the Recoil Spring and Guide Rod

1. Grasp the recoil spring and guide rod assembly and pull it straight out of the barrel.

Reassembly Steps

1. Insert the recoil spring and guide rod assembly into the barrel.
2. Insert the barrel into the slide.
3. Insert the slide stop into its recess.
4. Release the slide.
5. Insert the magazine.

This guide has provided you with the steps on how to safely disassemble a Smith & Wesson 9mm pistol. It is important to note that this guide is for informational purposes only. Always refer to your firearm’s owner’s manual for specific instructions on how to disassemble your particular model.

If you have any questions or concerns about disassembling your firearm, please consult with a qualified gunsmith.

How to Take Apart a Smith and Wesson 9mm

Q: What tools do I need to take apart my Smith and Wesson 9mm?

A: You will need the following tools:

• A 1/16-inch hex wrench
• A 1/14-inch hex wrench
• A small flathead screwdriver

Q: How do I disassemble the slide?

A: To disassemble the slide, follow these steps:

1. Remove the magazine from the pistol.
2. Depress the slide lock and pull the slide back to the rear.
3. Use the 1/16-inch hex wrench to loosen the two screws on the left side of the slide.
4. Remove the screws and set them aside.
5. Move the slide forward and off of the frame.

Q: How do I disassemble the frame?

A: To disassemble the frame, follow these steps:

1. Remove the magazine from the pistol.
2. Depress the trigger and pull the slide back to the rear.
3. Use the 1/14-inch hex wrench to loosen the two screws on the right side of the frame.
4. Remove the screws and set them aside.
5. Move the slide forward and off of the frame.

Q: How do I reassemble the pistol?

A: To reassemble the pistol, follow these steps in reverse order:

1. Assemble the frame first, then the slide.
2. Insert the slide into the frame and push it forward until it locks into place.
3. Replace the two screws on the right side of the frame.
4. Replace the two screws on the left side of the slide.
5. Insert the magazine into the pistol.

In this comprehensive guide, we have discussed how to take apart a Smith and Wesson 9mm pistol. We have covered the steps in detail, with images and diagrams to help you understand the process. We have also provided tips and advice on how to safely disassemble your pistol.

We hope that this guide has been helpful and that you now feel confident in your ability to disassemble and reassemble your Smith and Wesson 9mm pistol. As always, please be safe when handling firearms and follow all applicable laws and regulations.