How To Take Apart Glock 17 Gen 5?
How to Take Apart a Glock 17 Gen 5
The Glock 17 Gen 5 is a popular handgun for self-defense and law enforcement. It is a reliable and easy-to-use firearm, but it is important to know how to properly maintain it. One of the most important maintenance tasks is disassembling and cleaning the gun. In this article, we will walk you through the steps of how to take apart a Glock 17 Gen 5.
We will provide a step-by-step guide with pictures and detailed instructions. We will also cover some common mistakes to avoid. By the end of this article, you will be able to disassemble and reassemble your Glock 17 Gen 5 with confidence.
| Step | Instructions | Image |
|---|---|---|
| 1 | Depress the trigger and lock the slide back. |  |
| 2 | Press the takedown lever down and rotate it 90 degrees. |  |
| 3 | Remove the slide from the frame. |  |
| 4 | Remove the recoil spring assembly from the slide. |  |
| 5 | Remove the barrel from the slide. |  |
The Glock 17 Gen 5 is a striker-fired, semi-automatic pistol chambered in 9mm Luger. It is the fifth generation of the Glock 17, and it features a number of improvements over previous models. These improvements include a new textured grip, a redesigned trigger, and a new barrel.
Taking apart a Glock 17 Gen 5 is a relatively simple process. However, it is important to follow the proper steps in order to avoid damage to the firearm.
Tools and Materials
The following tools are required to take apart a Glock 17 Gen 5:
- A Glock Armorer’s Tool
- A punch
- A set of small screwdrivers
- A cleaning cloth
- A small amount of gun oil
Required Tools
The Glock Armorer’s Tool is a specialized tool that is used to disassemble and reassemble Glock pistols. It is available from a variety of online retailers.
The punch is used to drive out the pins that hold the Glock 17 Gen 5 together. A small punch is sufficient for this task.
The small screwdrivers are used to remove the screws that hold the sights and other components in place. A set of Phillips-head and flat-head screwdrivers should be sufficient.
The cleaning cloth is used to wipe down the firearm after it has been disassembled. A small amount of gun oil is also used to lubricate the firearm.
Steps
The following steps are involved in taking apart a Glock 17 Gen 5:
1. Remove the magazine from the firearm.
2. Depress the slide lock and pull the slide back until it is fully locked open.
3. Use the Glock Armorer’s Tool to drive out the takedown pin located at the rear of the slide.
4. Move the slide forward and off of the frame.
5. Use the punch to drive out the two pins located on the left side of the frame.
6. Remove the recoil spring assembly and the barrel from the frame.
7. Use the small screwdrivers to remove the sights and other components from the slide.
8. Wipe down the firearm with the cleaning cloth and apply a small amount of gun oil.
Taking apart a Glock 17 Gen 5 is a relatively simple process. However, it is important to follow the proper steps in order to avoid damage to the firearm. By following the steps outlined in this guide, you can safely and easily disassemble your Glock 17 Gen 5.
How To Take Apart Glock 17 Gen 5?
The Glock 17 Gen 5 is a striker-fired, semi-automatic pistol chambered in 9mm Luger. It is a popular choice for self-defense and law enforcement use. This guide will show you how to take apart the Glock 17 Gen 5 for cleaning and maintenance.
Tools and Materials
You will need the following tools and materials to take apart the Glock 17 Gen 5:
- A Glock Armorer’s Tool or a small punch
- A cleaning rod
- A boresnake
- A gun oil
- A rag
Step 1: Remove the magazine and clear the chamber
The first step is to remove the magazine from the pistol and clear the chamber. To do this, press the magazine release button located on the left side of the frame and remove the magazine. Then, pull the slide back and check to see if there is a round in the chamber. If there is a round in the chamber, eject it by pressing the slide release button.
Step 2: Lock the slide back
The next step is to lock the slide back. To do this, press the slide stop lever located on the left side of the frame and pull the slide back until it locks into place.
Step 3: Remove the slide stop lever
Now that the slide is locked back, you can remove the slide stop lever. To do this, use a Glock Armorer’s Tool or a small punch to depress the slide stop lever spring plunger. This will release the slide stop lever, which you can then remove by hand.
Step 4: Remove the slide assembly
With the slide stop lever removed, you can now remove the slide assembly. To do this, grasp the slide assembly with both hands and pull it forward and off of the frame.
Step 5: Remove the barrel and recoil spring assembly
The barrel and recoil spring assembly is now exposed. To remove it, grasp the barrel with one hand and the recoil spring assembly with the other hand. Pull the barrel and recoil spring assembly forward and out of the slide.
Step 6: Remove the striker assembly
The striker assembly is now exposed. To remove it, use a Glock Armorer’s Tool or a small punch to depress the striker spring plunger. This will release the striker assembly, which you can then remove by hand.
Step 7: Reassemble the Glock 17 Gen 5
To reassemble the Glock 17 Gen 5, follow these steps in reverse order.
1. Insert the striker assembly into the slide.
2. Insert the barrel and recoil spring assembly into the slide.
3. Press the slide assembly forward until it locks into place.
4. Insert the slide stop lever and secure it with the slide stop lever spring plunger.
5. Clear the chamber and reinsert the magazine.
Safety Precautions
- Always keep the firearm pointed in a safe direction.
- Make sure the firearm is unloaded before you begin disassembly.
- Use only the tools and materials specified in this guide.
- Do not force anything if it is not going together easily.
- If you are unsure of how to disassemble the firearm, consult a qualified gunsmith.
How do I take apart a Glock 17 Gen 5?
1. Ensure that the Glock 17 is unloaded.
2. Depress the trigger and lock the slide back.
3. Press the disassembly lever down and rotate it 90 degrees clockwise.
4. Remove the slide from the frame.
5. Remove the recoil spring assembly from the slide.
6. Remove the barrel from the slide.
What tools do I need to take apart a Glock 17 Gen 5?
You will need a Glock disassembly tool or a small flathead screwdriver.
Can I take apart a Glock 17 Gen 5 without a tool?
It is possible to take apart a Glock 17 Gen 5 without a tool, but it is not recommended. Using a tool will make the process easier and less likely to damage the gun.
What should I do if I get stuck while taking apart my Glock 17 Gen 5?
If you get stuck while taking apart your Glock 17 Gen 5, do not force it. There is a chance that you could damage the gun. Instead, consult the owner’s manual or a qualified gunsmith for help.
What should I do after I take apart my Glock 17 Gen 5?
After you have taken apart your Glock 17 Gen 5, clean and lubricate the gun according to the owner’s manual. Then, reassemble the gun and make sure that it is functioning properly.
In this comprehensive guide, we have shown you how to take apart a Glock 17 Gen 5 pistol. We have covered all of the steps in detail, from removing the magazine and slide to disassembling the frame. We hope that this guide has been helpful and that you now feel confident in your ability to disassemble and reassemble your Glock 17 Gen 5.
Here are some key takeaways from this guide:
- Always follow the manufacturer’s instructions when disassembling your Glock 17 Gen 5.
- Be careful not to lose any small parts during disassembly.
- Reassemble your Glock 17 Gen 5 in the reverse order of disassembly.
- Lubricate your Glock 17 Gen 5 after reassembly.
- Practice disassembling and reassembling your Glock 17 Gen 5 regularly to maintain your skills.
By following these tips, you can keep your Glock 17 Gen 5 in top working condition and ensure that it is safe to use.