How To Take Apart A Glock Magazine?
How to Take Apart a Glock Magazine
Glock magazines are some of the most popular and reliable magazines on the market, but they can also be a bit tricky to take apart. In this article, we’ll walk you through the process of disassembling and reassembling a Glock magazine, step-by-step. We’ll also provide some tips on how to keep your magazines functioning properly.
So whether you’re new to Glocks or you’re just looking for a refresher, read on for all the information you need to know about taking apart a Glock magazine.
| Step | Instructions | Image |
|---|---|---|
| 1 | Depress the magazine release button located at the bottom of the grip. |  |
| 2 | Grasp the magazine firmly and pull it straight out of the grip. |  |
| 3 | The magazine is now disassembled. |  |
Glock magazines are some of the most popular and reliable magazines on the market. They are also relatively easy to disassemble and reassemble. This guide will show you how to take apart a Glock magazine so that you can clean it, inspect it for damage, or replace any worn parts.
Safety Precautions
Before disassembling a Glock magazine, make sure the magazine is empty and the firearm is not loaded. This will help to prevent any accidents.
Wear eye protection to protect your eyes from any debris that may be released during disassembly.
Work in a well-ventilated area to avoid inhaling any fumes or dust.
Disassembly Steps
1. Remove the magazine from the firearm.
2. Press down on the magazine release button and slide the magazine out of the firearm.
3. Turn the magazine upside down and locate the two small tabs on the side of the magazine.
4. Press down on the tabs and slide the magazine body down until it separates from the floorplate.
5. Remove the spring and follower from the magazine body.
Reassembly Steps
1. Insert the spring and follower into the magazine body.
2. Slide the magazine body up until it engages with the floorplate.
3. Press down on the floorplate until it snaps into place.
4. Insert the magazine into the firearm.
Disassembling and reassembling a Glock magazine is a relatively simple process. By following these steps, you can keep your magazine in good working order and ensure that it is properly functioning.
Here are some additional tips for disassembling and reassembling a Glock magazine:
- Use a clean, dry cloth to wipe down the magazine before and after disassembly.
- Be careful not to lose any small parts during disassembly.
- If you are unsure how to disassemble or reassemble a Glock magazine, consult the owner’s manual or a qualified gunsmith.
Disassembly Steps
To disassemble a Glock magazine, you will need the following tools:
- A flathead screwdriver
- A small punch or nail
1. Remove the magazine from the firearm.
2. Locate the two tabs on the side of the magazine body.
3. Use the flathead screwdriver to pry up the tabs.
4. The magazine body will now be free to slide up.
5. Remove the spring and follower from the magazine body.
Reassembly Steps
To reassemble a Glock magazine, follow these steps:
1. Insert the spring and follower into the magazine body.
2. Align the tabs on the magazine body with the slots in the floorplate.
3. Slide the magazine body up until it snaps into place.
4. Insert the magazine into the firearm.
Cleaning and Maintenance
After disassembling the magazine, clean it with a soft cloth and a mild cleaning solution. Be sure to dry the magazine completely before reassembling it.
To prevent rust and corrosion, lubricate the magazine with a light coat of oil.
Disassembling and reassembling a Glock magazine is a simple process that can be completed in a few minutes. By following these steps, you can keep your magazine in good working order and ensure that it is properly lubricated.
How do I take apart a Glock magazine?
1. With the magazine empty, depress the magazine release button and remove the magazine from the firearm.
2. Locate the two small tabs on the side of the magazine.
3. Press down on both tabs and slide the magazine body forward.
4. The magazine spring and follower will come out with the magazine body.
5. To reassemble the magazine, insert the magazine spring and follower into the magazine body.
6. Slide the magazine body back into the magazine housing until it clicks into place.
What tools do I need to take apart a Glock magazine?
You will need a Glock magazine tool or a small flathead screwdriver to take apart a Glock magazine.
How long does it take to take apart a Glock magazine?
It should take about 30 seconds to take apart a Glock magazine.
What can I do if my Glock magazine is stuck?
If your Glock magazine is stuck, you can try the following:
1. Wiggle the magazine back and forth while pressing down on the magazine release button.
2. Use a Glock magazine tool or a small flathead screwdriver to pry the magazine release button up.
3. Heat the magazine body with a hair dryer or heat gun for a few seconds.
4. Apply a small amount of lubricant to the magazine release button and slide the magazine out.
What should I do if I damage my Glock magazine?
If you damage your Glock magazine, you should replace it with a new one. You can purchase Glock magazines from a variety of online retailers and gun stores.
Can I take apart a Glock magazine that is loaded?
It is not recommended to take apart a Glock magazine that is loaded. Doing so could cause the magazine to fire, which could result in serious injury or death.
In this blog post, we have discussed how to take apart a Glock magazine. We started by discussing the different parts of a Glock magazine, and then we showed you how to remove the magazine catch, follower, and spring. We also provided some tips for troubleshooting common problems with Glock magazines.
We hope that this blog post has been helpful. If you have any other questions about Glock magazines, please do not hesitate to contact us.