How to Properly Sight in Your TenPoint Crossbow Scope

How to Sight in a Crossbow Scope Tenpoint

Crossbow hunting is a challenging and rewarding sport, but it’s important to make sure your crossbow is sighted in correctly before you head out into the field. If your crossbow scope is not sighted in properly, you’ll likely miss your target, which can be frustrating and dangerous.

Sighting in a crossbow scope is a relatively simple process, but it does require some patience and attention to detail. In this article, we’ll walk you through the steps of how to sight in a crossbow scope Tenpoint, so you can be confident in your accuracy on the next hunt.

We’ll cover everything from choosing the right crossbow scope to making the final adjustments. So whether you’re a seasoned crossbow hunter or you’re just getting started, read on for all the information you need to know about sighting in your crossbow scope Tenpoint.

“`html

Step	Instructions	Image
1	Attach the crossbow scope to the crossbow.
2	Set the crossbow scope to the correct magnification.
3	Adjust the crossbow scope’s windage and elevation to zero.
4	Fire a few shots at a target and adjust the crossbow scope’s windage and elevation as needed.
5	Once the crossbow scope is sighted in, you can start hunting.

“`

Choosing the Right Scope for Your Crossbow

When choosing a scope for your crossbow, there are a few factors you need to consider.

• The size of your crossbow. The size of your crossbow will determine the size of the scope you can use. Make sure to choose a scope that is not too large for your crossbow, or it will be difficult to aim.
• The power of your crossbow. The power of your crossbow will also affect the type of scope you need. A crossbow with a higher draw weight will require a scope with a higher magnification.
• Your shooting style. Do you plan on using your crossbow for hunting or target shooting? If you plan on using your crossbow for hunting, you will need a scope with a wider field of view. If you plan on using your crossbow for target shooting, you will need a scope with a higher magnification.

Once you have considered these factors, you can start narrowing down your choices. Here are a few things to look for when choosing a scope for your crossbow:

• The objective lens diameter. The objective lens diameter is the size of the lens at the front of the scope. The larger the objective lens diameter, the more light the scope will gather, which will give you a brighter image.
• The magnification. The magnification is the amount that the scope will magnify the target. The higher the magnification, the closer the target will appear.
• The field of view. The field of view is the amount of the target that you can see at once. A wider field of view is better for hunting, while a narrower field of view is better for target shooting.
• The eye relief. Eye relief is the distance between your eye and the scope’s eyepiece. The eye relief should be long enough so that you can comfortably see the entire target without your head getting in the way.
• The reticle. The reticle is the crosshairs or other aiming system in the scope. There are many different types of reticles available, each with its own advantages and disadvantages.

Once you have considered all of these factors, you can choose a scope that is right for you.

Mounting the Scope on Your Crossbow

Once you have chosen a scope for your crossbow, you need to mount it. Most crossbows come with a pre-drilled scope mount, so mounting the scope is a relatively simple process.

To mount the scope, you will need the following tools:

• A screwdriver
• A scope mounting kit
• A level

1. Remove the old scope, if necessary. If your crossbow already has a scope mounted, you will need to remove it before you can mount the new scope. To do this, unscrew the screws that hold the scope in place.
2. Install the scope mounting kit. The scope mounting kit will come with all of the necessary hardware to mount the scope to your crossbow. Follow the instructions that come with the kit to install the mounting kit.
3. Mount the scope. Once the mounting kit is installed, you can mount the scope. Place the scope on the mounting rings and tighten the screws to secure it in place.
4. Level the scope. Once the scope is mounted, you need to level it. To do this, use a level to make sure that the scope is parallel to the ground.
5. Adjust the eye relief. The eye relief is the distance between your eye and the scope’s eyepiece. The eye relief should be long enough so that you can comfortably see the entire target without your head getting in the way. To adjust the eye relief, loosen the eyepiece lock and move the eyepiece until you find a comfortable position.

Once you have mounted the scope and adjusted the eye relief, you are ready to start shooting.

Choosing and mounting a scope for your crossbow is a relatively simple process, but it is important to do it correctly so that you can get the most out of your crossbow. By following the tips in this article, you can choose the right scope for your crossbow and mount it correctly so that you can hit your target every time.

Adjusting the Scope for Accuracy

Once you have mounted the scope to your crossbow, you will need to adjust it for accuracy. This process is relatively simple, but it is important to take your time and do it correctly.

To begin, you will need to find a target that is at least 20 yards away. You can use a paper target, a foam block, or even a tree stump. Once you have chosen your target, you will need to set up your crossbow in a comfortable shooting position.

Next, you will need to focus on the target and take a few shots. As you shoot, pay attention to where the arrows are hitting the target. If the arrows are hitting to the left or right of the target, you will need to adjust the scope’s windage. To do this, loosen the windage screws on the scope and turn them in the direction that you need to move the point of impact. Once you have made the adjustment, tighten the screws and take another shot. Repeat this process until the arrows are hitting the center of the target.

If the arrows are hitting above or below the target, you will need to adjust the scope’s elevation. To do this, loosen the elevation screws on the scope and turn them in the direction that you need to move the point of impact. Once you have made the adjustment, tighten the screws and take another shot. Repeat this process until the arrows are hitting the center of the target.

Once you have adjusted the scope for accuracy, you should take a few more shots to make sure that the adjustments are holding. If the arrows are still hitting consistently, you are ready to start hunting.

Testing the Scope for Accuracy

Once you have adjusted the scope for accuracy, you should test it to make sure that the adjustments are holding. To do this, you will need to shoot a few arrows at a target that is at least 20 yards away. As you shoot, pay attention to where the arrows are hitting the target. If the arrows are hitting consistently in the center of the target, the scope is accurate. If the arrows are hitting to the left or right of the target, or above or below the target, you will need to adjust the scope again.

To test the scope for accuracy, you can use a variety of targets. You can use a paper target, a foam block, or even a tree stump. You can also use a target that is specifically designed for testing scopes. These targets typically have a series of circles that are marked with different distances. You can shoot at the target from different distances to test the scope’s accuracy at different ranges.

Once you have tested the scope for accuracy, you should be confident that it will perform well when you are hunting.

Sighting in a crossbow scope is a relatively simple process, but it is important to take your time and do it correctly. By following the steps in this guide, you can ensure that your crossbow scope is accurate and that you will be able to make accurate shots when you are hunting.

How do I sight in a crossbow scope Tenpoint?

Sighting in a crossbow scope Tenpoint is a simple process that can be completed in a few minutes. Here are the steps involved:

1. Attach the scope to the crossbow. Make sure that the scope is securely attached to the crossbow and that it is properly aligned.
2. Locate a target. The target should be at a distance of 20 yards.
3. Load the crossbow and cock it.
4. Adjust the scope’s crosshairs so that they are aligned with the center of the target. You can do this by using the windage and elevation knobs on the scope.
5. Fire a shot at the target. If the shot is not on target, adjust the scope’s crosshairs accordingly and repeat steps 4 and 5 until the shot is on target.

Here are some additional tips for sighting in a crossbow scope Tenpoint:

• Make sure that the crossbow is level when you are sighting it in.
• Use a target that is the same size as the game you are hunting.
• Start with the scope’s crosshairs set at the factory default settings.
• Only adjust one setting at a time.
• Be patient and take your time. Sighting in a crossbow scope Tenpoint is a precise process, but it is well worth the effort.

What are the different types of crossbow scopes?

There are two main types of crossbow scopes: fixed and adjustable. Fixed scopes have a set magnification and cannot be adjusted. Adjustable scopes allow you to change the magnification, which can be useful for hunting at different distances.

Fixed scopes are generally less expensive than adjustable scopes. However, adjustable scopes offer more versatility and can be a better choice for hunters who want to be able to shoot at different distances.

What is the best crossbow scope for Tenpoint?

The best crossbow scope for Tenpoint will vary depending on your individual needs and preferences. However, some of the most popular crossbow scopes for Tenpoint include the following:

• Tenpoint CMR-300
• Tenpoint CMR-500
• Tenpoint CMR-700
• Tenpoint CMR-900

These scopes are all high-quality and offer a variety of features, including multiple magnification levels, illuminated reticles, and adjustable turrets.

How much does a crossbow scope cost?

The cost of a crossbow scope can vary depending on the brand, features, and magnification. However, you can expect to pay anywhere from $50 to $500 for a quality crossbow scope.

Where can I buy a crossbow scope?

You can buy a crossbow scope from a variety of retailers, including sporting goods stores, online retailers, and archery shops.

Here are some of the best places to buy a crossbow scope:

• [Amazon.com](https://www.amazon.com/crossbow-scopes/b?ie=UTF8&node=301577011)
• [Bass Pro Shops](https://www.basspro.com/shop/en/crossbow-scopes)
• [Cabela’s](https://www.cabelas.com/shop/en/crossbow-scopes)
• [Dick’s Sporting Goods](https://www.dickssportinggoods.com/c/crossbow-scopes/)

How to care for a crossbow scope?

To keep your crossbow scope in good condition, it is important to care for it properly. Here are a few tips:

• Clean the scope regularly. Use a soft cloth to wipe away any dirt or debris.
• Do not expose the scope to extreme temperatures. High temperatures can damage the scope’s lenses, while low temperatures can cause the scope to fog up.
• Do not drop the scope. Dropping the scope can damage the lenses or the scope’s body.
• Store the scope in a safe place. When you are not using the scope, store it in a case or other protective container.

By following these tips, you can help to extend the life of your crossbow scope.

sighting in a crossbow scope Tenpoint is a relatively simple process that can be completed in a few minutes. By following the steps outlined in this article, you can ensure that your crossbow is properly sighted in and that you are able to hit your target with every shot.

Here are the key takeaways from this article:

• The first step is to mount the scope to the crossbow.
• The next step is to adjust the scope’s elevation and windage knobs.
• Once the scope is properly adjusted, you can test it by shooting at a target.
• Be sure to check the scope’s zeroing frequently, especially if you change the crossbow’s arrows or strings.

By following these steps, you can ensure that your crossbow scope Tenpoint is properly sighted in and that you are able to hit your target with every shot.