How To Remove Glock Rear Sight?
How to Remove a Glock Rear Sight
The Glock rear sight is a critical component of your pistol’s accuracy. If it becomes damaged or misaligned, it’s important to be able to remove it and replace it with a new one. In this article, we’ll show you how to remove the rear sight on a Glock pistol in a few simple steps.
We’ll also provide some tips on how to choose the right replacement sight for your Glock, and how to install it correctly. So whether you’re looking to improve your Glock’s accuracy or simply need to replace a damaged sight, read on for all the information you need.
| Step | Tools | Instructions |
|---|---|---|
| 1 | Sight pusher |
|
| 2 | Bench vise |
|
| 3 | File |
|
Tools and Materials Needed
To remove the rear sight from a Glock pistol, you will need the following tools and materials:
- Glock rear sight removal tool
- Small flathead screwdriver
- Safety glasses
Steps to Remove the Rear Sight
1. Remove the slide from the frame. To do this, depress the slide lock lever and pull the slide rearward until it is clear of the frame.
2. Locate the rear sight removal tool. The rear sight removal tool is a small, L-shaped tool that is specifically designed for removing Glock rear sights. It is typically included with the pistol when you purchase it.
3. Insert the rear sight removal tool into the rear sight. The rear sight removal tool has a small, pointed end that is designed to fit into the hole in the center of the rear sight. Insert the pointed end of the tool into the hole and turn it clockwise until the rear sight is loosened.
4. Remove the rear sight. Once the rear sight is loosened, you can use the small flathead screwdriver to pry it out of the slide. Be careful not to damage the slide or the rear sight.
5. Reinstall the rear sight. To reinstall the rear sight, simply reverse the steps above. Make sure that the rear sight is properly seated in the slide before you reattach the slide to the frame.
Removing the rear sight from a Glock pistol is a relatively simple process, but it is important to take your time and be careful not to damage the slide or the rear sight. If you are not comfortable doing this yourself, you can always take your pistol to a qualified gunsmith.
3. Remove the slide from the frame.
To remove the slide from the frame, you will need to:
1. Depress the slide stop lever.
2. Pull back on the slide and then release it.
3. The slide should now be free from the frame.
4. Depress the rear sight retaining pin with the flathead screwdriver.
To depress the rear sight retaining pin, you will need to:
1. Insert the flathead screwdriver into the hole in the rear sight.
2. Apply pressure to the screwdriver and depress the retaining pin.
3. The retaining pin should now be free from the slide.
Once you have removed the rear sight retaining pin, you can now remove the rear sight from the slide. To do this, simply slide the rear sight off of the slide.
Here are some additional tips for removing a Glock rear sight:
- Make sure that you are using the correct size flathead screwdriver. The retaining pin is small, so you do not want to use a screwdriver that is too large.
- Be careful not to damage the slide or the rear sight. The slide is made of metal, so it is relatively durable. However, the rear sight is made of plastic, so it is more fragile.
- If you are having trouble removing the rear sight, you can try using a heat gun or a hair dryer to heat up the slide. This will make the plastic more pliable and easier to remove.
By following these tips, you can easily remove the rear sight from your Glock.
How do I remove the rear sight on my Glock?
1. Depress the rear sight lock. The rear sight lock is a small lever located on the rear of the slide, just above the rear sight. To depress the lock, use a small flat-head screwdriver or a punch and apply pressure to the top of the lock.
2. Slide the rear sight off of the slide. Once the lock is depressed, the rear sight should slide off of the slide. If it is stuck, you may need to apply a little more pressure or use a small amount of lubricant.
What tools do I need to remove the rear sight on my Glock?
You will need a small flat-head screwdriver or a punch to depress the rear sight lock. You may also need a small amount of lubricant if the rear sight is stuck.
Is it difficult to remove the rear sight on a Glock?
It is not difficult to remove the rear sight on a Glock, but it does require a small amount of force and precision. If you are not comfortable working with firearms, you may want to have a qualified gunsmith remove the rear sight for you.
What happens if I drop my Glock?
If you drop your Glock, it is possible that the rear sight could come loose. If this happens, you will need to reattach the rear sight using the steps above.
Can I replace the rear sight on my Glock with a different sight?
Yes, you can replace the rear sight on your Glock with a different sight. However, it is important to make sure that the new sight is compatible with your Glock. You can find a list of compatible sights on the Glock website.
How often should I replace the rear sight on my Glock?
The rear sight on your Glock does not need to be replaced unless it is damaged or you want to change the sight picture.
In this blog post, we have discussed how to remove a Glock rear sight. We started by discussing the tools and materials you will need. We then provided step-by-step instructions on how to remove the sight. Finally, we offered some tips and tricks to help you complete the task successfully.
We hope that this blog post has been helpful. If you have any questions, please do not hesitate to contact us.