How To Remove Glock Base Plate?

How to Remove a Glock Base Plate

The Glock pistol is a popular choice for self-defense and law enforcement use. One of the most common Glock modifications is to replace the stock base plate with a different one. This can be done for a variety of reasons, such as to improve grip, add a magazine extension, or simply to personalize the firearm.

Removing the Glock base plate is a simple process that can be completed in a few minutes. In this article, we will walk you through the steps involved in removing and replacing a Glock base plate.

We will also provide some tips on choosing the right base plate for your Glock and how to install it properly. So, if you’re thinking about customizing your Glock, read on for all the information you need to know!

Step	Instructions	Image
1	Depress the magazine release button and remove the magazine from the gun.
2	Using a Glock Armorer’s Tool, insert the tip of the tool into the hole in the back of the slide and rotate counterclockwise until the slide lock is released.
3	Pull the slide back and off of the frame.
4	Using a small flathead screwdriver, pry up on the base plate until it pops off.
5	Remove the spring and follower from the magazine.
6	To reinstall the base plate, simply reverse the steps above.

Tools and Materials Needed

To remove the base plate from a Glock pistol, you will need the following tools and materials:

• A Glock Armorer’s Tool or a small punch
• A flathead screwdriver
• A pair of needle-nose pliers
• A small piece of cloth
• A cleaning rod
• Gun oil

Steps to Remove the Base Plate

1. Remove the magazine from the pistol.
2. Depress the slide stop lever and lock the slide back.
3. Use the Glock Armorer’s Tool or a small punch to push out the pin that holds the base plate in place.
4. Use a flathead screwdriver to pry up the base plate.
5. Use a pair of needle-nose pliers to remove the spring and plunger from the base plate.
6. Use a small piece of cloth to clean the inside of the base plate.
7. Apply a small amount of gun oil to the inside of the base plate.
8. Reinstall the spring, plunger, and base plate.
9. Reinsert the pin that holds the base plate in place.
10. Release the slide stop lever and allow the slide to move forward.

Removing the base plate from a Glock pistol is a simple process that can be completed in a few minutes. By following these steps, you can safely and easily remove the base plate from your Glock pistol for cleaning or maintenance.

3. Safety Precautions

When removing the Glock base plate, it is important to take precautions to avoid injury. Here are a few tips:

• Use the proper tools. A Glock base plate removal tool is designed specifically for this task and will make the job easier and safer. Do not attempt to remove the base plate with a knife or other sharp object, as this could damage the gun.
• Wear eye protection. When working with firearms, it is always important to wear eye protection to protect your eyes from flying debris.
• Be aware of the direction of the spring. The spring under the base plate is under tension, so it is important to be aware of the direction it is facing before you remove the base plate. If the spring is released suddenly, it could cause injury.
• Take your time. Removing the Glock base plate can be a tricky task, so it is important to take your time and do it carefully. Rushing the process could result in damage to the gun or injury to yourself.

4. Common Problems and Solutions

There are a few common problems that people encounter when trying to remove the Glock base plate. Here are a few solutions to these problems:

• The base plate is stuck. If the base plate is stuck, you can try heating it up with a hair dryer or heat gun. This will soften the plastic and make it easier to remove. You can also try using a lubricant, such as WD-40, to help loosen the base plate.
• The spring is stuck. If the spring is stuck, you can try using a small screwdriver or other tool to gently pry it up. Be careful not to damage the spring.
• The base plate is damaged. If the base plate is damaged, you will need to replace it. You can purchase a replacement base plate from a gun store or online retailer.

Removing the Glock base plate is a relatively simple task, but it is important to take precautions to avoid injury. By following the tips in this article, you can safely remove the Glock base plate and replace it with a new one.

How do I remove the base plate of a Glock?

1. Depress the magazine release button and remove the magazine.
2. Locate the two small holes on the side of the base plate.
3. Insert a small, pointed object (such as a paperclip or a safety pin) into each hole and push down.
4. The base plate will pop out.

What if the base plate is stuck?

1. Try using a more pointed object, such as a needle or a nail.
2. Apply a little bit of pressure to the base plate while pushing down on the release buttons.
3. If the base plate is still stuck, you may need to use a heat gun or a hair dryer to warm it up.

What do I do with the spring and the follower after I remove the base plate?

1. The spring and the follower can be discarded.
2. If you want to keep them, you can place them in a small bag or container.

Can I put the base plate back on after I’ve removed it?

Yes, you can put the base plate back on after you’ve removed it.

1. Align the base plate with the bottom of the magazine.
2. Push down on the base plate until it snaps into place.
3. Reinsert the magazine into the gun.

In this blog post, we have discussed how to remove a Glock base plate. We started by discussing the different types of Glock base plates and how to identify which type you have. We then provided step-by-step instructions on how to remove a Glock base plate, both with and without a Glock tool. Finally, we answered some common questions about Glock base plates.

We hope that this blog post has been helpful. If you have any other questions about Glock base plates, please feel free to contact us.