How To Remove Bolt Remington 700?

How to Remove the Bolt from a Remington 700

The Remington 700 is a popular bolt-action rifle that is used for hunting, target shooting, and competition. It is a well-made and reliable rifle, but it is important to know how to properly maintain it. One of the most basic maintenance tasks is to remove the bolt and clean it. This is a relatively simple procedure, but it is important to do it correctly to avoid damaging the rifle.

In this article, we will walk you through the steps of removing the bolt from a Remington 700. We will also provide some tips on how to clean and lubricate the bolt. By following these steps, you can keep your Remington 700 in top condition and ensure that it performs reliably for years to come.

Step	Instructions	Image
1	Depress the bolt release button and pull the bolt handle to the rear.
2	Rotate the bolt clockwise until it stops.
3	Lift the bolt out of the receiver.

How to Remove the Bolt from a Remington 700

The Remington 700 is a popular bolt-action rifle that is used for hunting, target shooting, and other shooting sports. The bolt is a critical component of the rifle, and it is important to know how to remove it properly in order to clean and maintain the rifle.

This guide will show you how to remove the bolt from a Remington 700 in a few simple steps.

Safety Precautions

Before you begin, it is important to take some safety precautions to protect yourself and your rifle.

• Make sure that the rifle is unloaded.
• Remove the magazine from the rifle.
• Engage the safety.
• Work in a well-lit area.
• Wear eye protection.

Tools and Materials Needed

To remove the bolt from a Remington 700, you will need the following tools and materials:

• A Remington 700 bolt disassembly tool
• A small screwdriver
• A cleaning cloth

Steps

1. With the rifle unloaded and the safety engaged, remove the magazine from the rifle.
2. Grip the bolt handle with your right hand and turn it counterclockwise until it stops.
3. Use the small screwdriver to pry up the small tab on the bolt shroud.
4. While holding the tab up with the screwdriver, use your left hand to pull the bolt shroud forward.
5. The bolt shroud will come off, exposing the bolt.
6. Use the bolt disassembly tool to push the plunger in the bolt body.
7. The plunger will pop out, releasing the bolt head.
8. Pull the bolt head out of the bolt body.
9. The bolt is now removed from the rifle.

Now that you know how to remove the bolt from a Remington 700, you can clean and maintain your rifle properly. Be sure to follow all of the safety precautions listed above to protect yourself and your rifle.

For more information on how to maintain your Remington 700, please consult the owner’s manual.

3. Steps in Removing the Bolt

To remove the bolt from a Remington 700, you will need the following tools:

• A Remington 700 bolt disassembly tool
• A punch
• A hammer

1. Remove the magazine from the rifle.
2. Lock the bolt to the rear by pulling back on the bolt handle and rotating the safety to the “safe” position.
3. Insert the bolt disassembly tool into the hole in the bolt shroud.
4. Use the punch to push the bolt release plunger down.
5. While holding the bolt release plunger down, rotate the bolt handle clockwise until the bolt is released.
6. Remove the bolt from the rifle.

4. Testing the Bolt for Proper Function

Once you have removed the bolt from the rifle, you should test it for proper function. To do this, follow these steps:

1. Inspect the bolt for any damage or wear.
2. Make sure that the bolt face is clean and free of burrs.
3. Rotate the bolt handle clockwise and counterclockwise. The bolt should move smoothly and without any binding.
4. Engage the safety and make sure that the bolt is locked to the rear.
5. Depress the bolt release plunger and release the safety. The bolt should release and move forward smoothly.

If the bolt does not function properly, you should have it repaired or replaced.

Removing the bolt from a Remington 700 is a relatively simple process. However, it is important to follow the steps carefully to avoid damaging the rifle. If you are not comfortable removing the bolt, you should have a qualified gunsmith do it for you.

How do I remove the bolt from a Remington 700?

1. With the rifle unloaded, open the bolt action and lock the bolt open by pulling back on the bolt handle and rotating it down.
2. Use a small flathead screwdriver or a punch to depress the bolt release button located on the left side of the receiver.
3. While depressing the bolt release button, pull the bolt handle to the rear and remove the bolt from the receiver.

What tools do I need to remove the bolt from a Remington 700?

You will need a small flathead screwdriver or a punch to depress the bolt release button.

What is the difference between a Remington 700 bolt and a Remington 700 action?

The bolt is the part of the rifle that moves back and forth to chamber and eject cartridges. The action is the part of the rifle that houses the bolt and barrel.

Can I remove the bolt from a Remington 700 without tools?

It is possible to remove the bolt from a Remington 700 without tools, but it is not recommended. Using tools to remove the bolt will help to prevent damage to the rifle.

What happens if I drop the bolt from a Remington 700?

If you drop the bolt from a Remington 700, it is possible that the firing pin could be damaged. This could lead to the rifle firing without the trigger being pulled.

How often should I clean the bolt on my Remington 700?

You should clean the bolt on your Remington 700 after every use. This will help to prevent the build-up of dirt and grime, which can damage the bolt and cause it to malfunction.

What is the best way to clean the bolt on my Remington 700?

The best way to clean the bolt on your Remington 700 is to use a solvent and a brush. Be sure to clean all of the parts of the bolt, including the firing pin channel.

What is the difference between a Remington 700 bolt and a Remington 700 trigger?

The bolt is the part of the rifle that moves back and forth to chamber and eject cartridges. The trigger is the part of the rifle that is pulled to fire the rifle.

In this article, we have discussed how to remove the bolt from a Remington 700 rifle. We started by identifying the parts of the bolt and how they work together. We then discussed the steps involved in removing the bolt, including disengaging the safety, pulling back the cocking handle, and turning the bolt handle counterclockwise. We concluded by providing some tips for troubleshooting common problems.

We hope that this article has been helpful in learning how to remove the bolt from a Remington 700 rifle. If you have any further questions, please do not hesitate to contact us.