How to Remove an AR Pistol Brace for Cleaning or Repair

ByBuffalo Rifles Blog

How to Remove an AR Pistol Brace

The AR pistol brace is a popular accessory for AR-15 pistols. It provides a more comfortable way to shoot the pistol, and it can also help to reduce recoil. However, if you ever need to remove the brace, it’s important to know how to do it correctly.

In this article, we will walk you through the process of removing an AR pistol brace. We’ll provide step-by-step instructions, and we’ll also discuss some of the things you need to keep in mind.

So, if you’re ready to learn how to remove an AR pistol brace, keep reading!

How To Remove Ar Pistol Brace?

| Step | Action | Instructions |
|—|—|—|
| 1 | Remove the rear takedown pin | Use a punch or a small screwdriver to push out the rear takedown pin. |
| 2 | Remove the buffer tube | Pull the buffer tube out of the receiver. |
| 3 | Remove the pistol brace | Unscrew the pistol brace from the buffer tube. |

Tools and Materials Needed

To remove an AR pistol brace, you will need the following tools and materials:

  • A AR pistol brace
  • A flathead screwdriver
  • A pair of pliers
  • A punch
  • A hammer
  • A vice
  • A piece of wood

Steps in Removing the AR Pistol Brace

1. Remove the AR pistol brace from the firearm. To do this, you will need to first remove the screws that secure the brace to the firearm. These screws are typically located on the back of the brace, and they are usually held in place with a hex head screw. Use a flathead screwdriver to loosen the screws, and then remove them with a pair of pliers.
2. Remove the buffer tube. The buffer tube is a cylindrical tube that is located inside the AR pistol brace. It is held in place by a roll pin, which is a small pin that is inserted through the buffer tube and into the receiver. To remove the buffer tube, you will need to use a punch and a hammer to drive out the roll pin.
3. Remove the buffer spring and buffer. The buffer spring and buffer are located inside the buffer tube. To remove them, you will need to use a pair of pliers to compress the buffer spring and then remove the buffer.
4. Remove the AR pistol brace from the receiver. The AR pistol brace is now free from the firearm. To remove it, you will need to use a vice to hold the receiver and then use a hammer to tap on the back of the brace until it comes loose.

By following these steps, you can easily remove an AR pistol brace from your firearm. Be sure to exercise caution when working with firearms, and always wear eye protection.

How to Remove an AR Pistol Brace

An AR pistol brace is a device that is attached to the rear of an AR-15-style rifle to help stabilize the firearm while firing. It is not a stock, and therefore does not require a tax stamp or other federal registration. However, some states do have their own regulations regarding AR pistol braces.

If you need to remove an AR pistol brace, there are a few steps involved. First, you will need to make sure that the firearm is unloaded and safe to handle. Then, you will need to remove the castle nut and buffer tube assembly. Finally, you can remove the AR pistol brace from the rifle.

Here are the steps in more detail:

1. Make sure the firearm is unloaded and safe to handle. Check the chamber to make sure that there is no ammunition present. Then, engage the safety mechanism and remove the magazine.
2. Locate the castle nut and buffer tube assembly. The castle nut is a large, cylindrical nut that is located at the rear of the receiver. The buffer tube assembly is a telescoping tube that is attached to the castle nut.
3. Remove the castle nut. Use a 3/8-inch wrench to loosen the castle nut. Be careful not to over-tighten the wrench, as you could damage the threads.
4. Remove the buffer tube assembly. Once the castle nut is loose, you can remove the buffer tube assembly by pulling it straight out of the receiver.
5. Remove the AR pistol brace. The AR pistol brace is attached to the buffer tube assembly with a set screw. Use a small screwdriver to loosen the set screw and remove the AR pistol brace.

Once you have removed the AR pistol brace, you can reinstall it by following the steps in reverse order.

Safety Precautions

When removing an AR pistol brace, it is important to take the following safety precautions:

  • Make sure the firearm is unloaded and safe to handle.
  • Use the proper tools for the job.
  • Be careful not to over-tighten the castle nut or buffer tube assembly.
  • Do not remove the AR pistol brace if the firearm is loaded.

FAQs

Here are some frequently asked questions about removing an AR pistol brace:

  • Can I remove an AR pistol brace without a tool? No, you cannot remove an AR pistol brace without a tool. The castle nut and buffer tube assembly are held in place by a set screw, and you will need a screwdriver to loosen the set screw.
  • How do I know if my AR pistol brace is legal? The legality of an AR pistol brace depends on the laws in your state. Some states do not allow AR pistol braces, while others allow them with certain restrictions. You should check with your local law enforcement agency to find out what the laws are in your area.
  • Can I replace an AR pistol brace with a stock? Yes, you can replace an AR pistol brace with a stock. However, you will need to file a Form 1 with the Bureau of Alcohol, Tobacco, Firearms, and Explosives (ATF) and pay a $200 tax stamp.

Removing an AR pistol brace is a relatively simple process, but it is important to take the proper safety precautions. By following the steps in this guide, you can safely remove your AR pistol brace without damaging the firearm.

How do I remove an AR pistol brace?

To remove an AR pistol brace, you will need the following tools:

  • A flathead screwdriver
  • A punch
  • A hammer

1. First, remove the rear takedown pin. To do this, insert the flathead screwdriver into the slot on the rear of the receiver and pry the pin out.
2. Next, use the punch and hammer to drive out the roll pin that secures the pistol brace to the receiver.
3. Once the roll pin is removed, you can lift the pistol brace off of the receiver.

What if I can’t remove the roll pin?

If you can’t remove the roll pin with a punch and hammer, you can try using a vise. First, place the receiver in the vise with the roll pin facing up. Then, use the punch and hammer to drive the roll pin out.

Can I remove the pistol brace without removing the rear takedown pin?

No, you cannot remove the pistol brace without removing the rear takedown pin. The rear takedown pin is necessary to hold the pistol brace in place.

What if I damage the pistol brace when I’m removing it?

If you damage the pistol brace when you’re removing it, you can try to repair it. However, if the damage is too severe, you may need to replace the pistol brace.

Can I install a different pistol brace on my AR?

Yes, you can install a different pistol brace on your AR. However, you must make sure that the new pistol brace is compatible with your AR.

Where can I buy a pistol brace?

You can buy a pistol brace from a variety of online retailers. You can also find pistol braces at some gun stores.

How much does a pistol brace cost?

The price of a pistol brace can vary depending on the brand and model. Generally, pistol braces cost between $50 and $200.

AR pistol braces are a popular accessory for AR-15s, but they can be difficult to remove. By following the steps in this guide, you can safely and easily remove your AR pistol brace.

Here are the key takeaways:

  • AR pistol braces are designed to be attached and removed without the use of tools.
  • To remove an AR pistol brace, you will need to depress the release button and slide the brace forward.
  • Be sure to hold the firearm securely when removing the brace, as it may become unbalanced.
  • If you are unsure how to remove your AR pistol brace, consult with a qualified gunsmith.

Similar Posts