How To Remove Ar-15 A2 Stock?
How to Remove an AR-15 A2 Stock
The AR-15 A2 stock is a popular choice for AR-15 owners looking for a classic, military-style look. However, it can also be a bit of a pain to remove if you don’t know what you’re doing. In this guide, we’ll walk you through the process of removing an AR-15 A2 stock in just a few simple steps.
Step 1: Disassemble the AR-15
The first step is to disassemble the AR-15 so that you can access the stock. To do this, you’ll need to:
1. Remove the magazine.
2. Lock the bolt back.
3. Flip the safety selector to “safe.”
4. Remove the rear takedown pin.
5. Remove the front takedown pin.
Step 2: Remove the Stock Screw
Now that the AR-15 is disassembled, you can remove the stock screw. The stock screw is located on the underside of the stock, just behind the trigger guard. To remove it, you’ll need a 3/16-inch Allen wrench.
1. Insert the Allen wrench into the stock screw and turn it counterclockwise until it comes loose.
2. Remove the stock screw.
Step 3: Remove the Stock
Now that the stock screw is removed, you can remove the stock. To do this, simply pull the stock straight up and off of the receiver.
Step 4: Reassemble the AR-15
To reassemble the AR-15, simply reverse the steps you took to disassemble it.
1. Insert the stock into the receiver.
2. Insert the stock screw and tighten it with a 3/16-inch Allen wrench.
3. Replace the front takedown pin.
4. Replace the rear takedown pin.
5. Lock the bolt back.
6. Flip the safety selector to “fire.”
7. Insert the magazine.
Now that you know how to remove an AR-15 A2 stock, you can easily customize your rifle with a different stock or foregrip.
| Step | Instructions | Image |
|---|---|---|
| 1 | Lock the bolt back and pull the takedown pin. |  |
| 2 | Rotate the upper receiver away from the lower receiver. |  |
| 3 | Push the stock release button and pull the stock down and off. |  |
The AR-15 A2 stock is a popular choice for AR-15 rifles because of its durable construction and comfortable design. However, it is possible that you may need to remove the stock for cleaning, maintenance, or replacement. In this guide, we will show you how to remove an AR-15 A2 stock in just a few simple steps.
Tools and Materials
To remove an AR-15 A2 stock, you will need the following tools and materials:
- AR-15 A2 stock
- AR-15 A2 buffer tube
- AR-15 A2 castle nut
- AR-15 A2 end plate
- AR-15 A2 takedown pin
- AR-15 A2 takedown pin spring
- AR-15 A2 bolt catch
- AR-15 A2 bolt catch spring
- AR-15 A2 bolt catch roll pin
Steps
1. Remove the takedown pins. The first step is to remove the two takedown pins that hold the upper and lower receivers together. To do this, use a punch or a small screwdriver to push the takedown pins out from the inside of the receiver.
2. Remove the castle nut and end plate. Next, you will need to remove the castle nut and end plate from the buffer tube. To do this, use a wrench to loosen the castle nut until it is free from the threads on the buffer tube. Then, use a screwdriver to pry the end plate off of the buffer tube.
3. Remove the buffer tube. Now that the castle nut and end plate are removed, you can remove the buffer tube from the receiver. To do this, simply slide the buffer tube out of the receiver.
4. Remove the stock. Finally, you can remove the stock from the rifle. To do this, simply pull the stock off of the buffer tube.
That’s it! You have now successfully removed the AR-15 A2 stock from your rifle. If you need to reinstall the stock, simply reverse the steps above.
Here are some additional tips for removing an AR-15 A2 stock:
- If the takedown pins are stuck, you can try using a penetrating oil to loosen them.
- If the castle nut is stuck, you can try using a strap wrench or a breaker bar to loosen it.
- If the buffer tube is stuck, you can try using a rubber mallet to tap it out of the receiver.
By following these tips, you can easily remove and reinstall an AR-15 A2 stock.
3. Remove the AR-15 A2 takedown pin
The AR-15 A2 takedown pin is a small, cylindrical piece of metal that connects the upper and lower receivers of the rifle. It is located on the right side of the rifle, just behind the magazine well. To remove the takedown pin, you will need a small flathead screwdriver.
1. Insert the screwdriver into the slot in the takedown pin.
2. Apply pressure to the screwdriver and push the takedown pin out of the receiver.
3. The takedown pin should come out easily.
Once the takedown pin is removed, the upper and lower receivers can be separated.
4. Remove the AR-15 A2 takedown pin spring
The AR-15 A2 takedown pin spring is a small, cylindrical spring that keeps the takedown pin in place. It is located inside the receiver, just behind the takedown pin. To remove the takedown pin spring, you will need a small pair of needle-nose pliers.
1. Insert the pliers into the hole in the receiver.
2. Grasp the takedown pin spring with the pliers.
3. Pull the takedown pin spring out of the receiver.
The takedown pin spring should come out easily.
Once the takedown pin spring is removed, the upper and lower receivers can be separated.
How do I remove an AR-15 A2 stock?
1. Ensure that the rifle is unloaded and the safety is engaged.
2. Locate the two takedown pins on the rear of the receiver.
3. Using a small punch or screwdriver, depress the takedown pins and push them out of the receiver.
4. Carefully lift the rear of the stock up and off of the receiver.
5. To reinstall the stock, reverse the above steps.
What tools do I need to remove an AR-15 A2 stock?
You will need a small punch or screwdriver to depress the takedown pins.
Can I remove an AR-15 A2 stock without tools?
It is possible to remove an AR-15 A2 stock without tools, but it is difficult and not recommended. If you do not have access to tools, you can try using a coin or other small, flat object to depress the takedown pins. However, this is not a safe or reliable method, and you risk damaging your rifle.
What is the difference between an AR-15 A2 stock and a standard AR-15 stock?
The AR-15 A2 stock is a fixed stock, meaning that it cannot be adjusted for length of pull. Standard AR-15 stocks are typically adjustable, allowing the shooter to customize the length of pull to their individual preference.
**Can I replace an AR-15 A2 stock with a different type of stock?
Yes, you can replace an AR-15 A2 stock with a different type of stock. However, it is important to make sure that the new stock is compatible with your rifle.
**What are the benefits of using a different type of stock on an AR-15?
There are a number of benefits to using a different type of stock on an AR-15, including:
- Increased comfort: A different type of stock can provide more comfort and support for your shooting hand, which can improve accuracy and reduce fatigue.
- Increased adjustability: A different type of stock can be adjusted to fit your individual preferences, such as the length of pull and cheek weld.
- Improved ergonomics: A different type of stock can improve the ergonomics of your rifle, making it more comfortable to shoot for extended periods of time.
**What are the drawbacks of using a different type of stock on an AR-15?
There are a few drawbacks to using a different type of stock on an AR-15, including:
- Increased cost: A different type of stock can be more expensive than the standard AR-15 A2 stock.
- Increased weight: A different type of stock can be heavier than the standard AR-15 A2 stock.
- Reduced compatibility: A different type of stock may not be compatible with all AR-15s.
In this blog post, we have discussed how to remove an AR-15 A2 stock. We started by discussing the tools and materials you will need. Then, we walked you through the steps of removing the stock, including how to detach the buffer tube, castle nut, and stock assembly. Finally, we provided some tips for reinstalling the stock.
We hope this blog post has been helpful. If you have any questions, please feel free to leave a comment below.