How to Restore the Blued Finish on Your Gun with Perma Blue

How to Reblue a Gun with Perma Blue

The bluing process is a way to protect the metal on a firearm from corrosion and wear. It also gives the gun a distinctive, attractive finish. While bluing can be done at home, it is a somewhat complex and time-consuming process. If you’re not comfortable working with chemicals and firearms, it’s best to have a professional do the job.

If you’re determined to reblue your gun yourself, Perma Blue is a good option. It’s a simple, one-step process that produces professional-looking results. In this article, we’ll walk you through the steps of rebluing a gun with Perma Blue.

We’ll start by discussing the materials and tools you’ll need, then we’ll walk you through the steps of the process. We’ll also provide some tips and tricks to help you get the best results.

So if you’re ready to learn how to reblue a gun with Perma Blue, read on!

Step	Instructions	Image
1	Remove all old bluing from the gun using a chemical bluing remover.
2	Wipe down the gun with a clean cloth to remove any residual bluing remover.
3	Apply a coat of Perma Blue to the gun.
4	Allow the Perma Blue to dry for 24 hours.
5	Apply a second coat of Perma Blue and allow it to dry for another 24 hours.
6	Buff the gun with a clean cloth to polish the bluing.

How to Reblue a Gun with Perma Blue?

Rebluing a gun is a process of restoring the original blued finish to a firearm. This can be done for a variety of reasons, such as to improve the appearance of the gun, to protect the metal from corrosion, or to restore the gun to its original condition.

Perma Blue is a popular product for rebluing guns. It is a liquid chemical that is applied to the gun and then heated to produce a blued finish. Perma Blue is easy to use and produces consistent results.

In this guide, we will walk you through the process of rebluing a gun with Perma Blue. We will provide detailed instructions on how to prepare the gun, apply the Perma Blue, and heat the gun.

Preparation

Before you can reblue a gun, you need to gather the necessary materials and tools. The following is a list of the materials and tools you will need:

• Perma Blue
• A heat source, such as a torch or stovetop
• A wire brush
• A rag
• Safety glasses
• Gloves

Preparing the Gun

The first step is to prepare the gun for rebluing. This involves removing any rust or dirt from the gun. You can do this by using a wire brush to scrub the gun. Be sure to wear gloves to protect your hands.

Once the gun is clean, you need to apply a coat of oil to the metal. This will help to prevent the Perma Blue from sticking to the gun.

Applying the Perma Blue

Now that the gun is prepared, you can apply the Perma Blue. The following are the steps involved in applying the Perma Blue:

1. Shake the Perma Blue bottle well.
2. Apply a thin coat of Perma Blue to the gun.
3. Allow the Perma Blue to dry for 10 minutes.
4. Repeat steps 2 and 3 until the gun is completely covered in Perma Blue.

Heating the Gun

The final step is to heat the gun to activate the Perma Blue. The following are the steps involved in heating the gun:

1. Heat the gun to 400 degrees Fahrenheit.
2. Hold the gun over the heat source for 10 minutes.
3. Allow the gun to cool completely.

Rebluing a gun with Perma Blue is a relatively simple process. By following the steps in this guide, you can restore the original blued finish to your firearm.

Here are some additional tips for rebluing a gun with Perma Blue:

• Be sure to work in a well-ventilated area.
• Wear gloves to protect your hands.
• Use a heat source that is large enough to heat the entire gun.
• Allow the gun to cool completely before handling it.

If you have any questions about rebluing a gun with Perma Blue, please consult with a qualified gunsmith.

3. Polishing the Gun

Once the Perma Blue has dried completely, you will need to polish the gun to remove any excess Perma Blue. You can do this by using a fine-grit sandpaper or a polishing compound. Be sure to work in the direction of the grain of the metal.

Once you have polished the gun, you will need to protect the finish with a clear coat. This will help to prevent the Perma Blue from wearing off. You can use a clear coat specifically designed for firearms, or you can use a clear coat that is designed for automotive use.

4. Care and Maintenance

Once you have reblued your gun, it is important to take care of it to ensure that the finish lasts. Here are a few tips for caring for your reblued gun:

• Keep the gun clean and lubricated. This will help to protect the finish from wear and tear.
• Store the gun in a safe place. This will help to protect it from damage.
• Avoid exposing the gun to extreme heat or cold. This can damage the finish.
• Do not use harsh chemicals on the gun. This can also damage the finish.

By following these tips, you can help to keep your reblued gun looking its best for years to come.

Rebluing a gun is a relatively simple process, but it is important to follow the steps carefully to ensure that you get the best results. By following the steps in this guide, you can reblue your gun and give it a new lease on life.

How do I prepare a gun for rebluing with Perma Blue?

1. Remove all rust and old bluing from the gun using a commercial rust remover or a vinegar and baking soda solution.
2. Sand the gun with 220-grit sandpaper, then 320-grit sandpaper, and finally 400-grit sandpaper.
3. Wipe the gun down with a clean cloth to remove any dust or debris.
4. Apply a coat of Perma Blue primer to the gun. Allow the primer to dry completely.

How do I apply Perma Blue to a gun?

1. Shake the Perma Blue bottle well.
2. Apply a thin coat of Perma Blue to the gun using a small brush.
3. Allow the Perma Blue to dry for 10 minutes.
4. Apply a second coat of Perma Blue.
5. Allow the Perma Blue to dry for 10 minutes.
6. Apply a third coat of Perma Blue.
7. Allow the Perma Blue to dry overnight.

How do I protect my gun’s new bluing?

1. Apply a coat of gun oil to the gun.
2. Store the gun in a dry place.
3. Avoid exposing the gun to moisture or harsh chemicals.

What are some common problems with rebluing guns with Perma Blue?

• The gun may not be properly prepared for rebluing, resulting in a poor finish.
• The Perma Blue may be applied too thickly, resulting in a rough or uneven finish.
• The gun may not be allowed to dry completely between coats of Perma Blue, resulting in a dull or streaky finish.

How can I avoid problems with rebluing guns with Perma Blue?

• Follow the instructions on the Perma Blue bottle carefully.
• Make sure to properly prepare the gun for rebluing.
• Apply the Perma Blue in thin coats, allowing each coat to dry completely before applying the next coat.
• Store the gun in a dry place and avoid exposing it to moisture or harsh chemicals.

  rebluing a gun with Perma Blue is a relatively simple process that can be completed in a few hours. However, it is important to follow the steps carefully and use the correct materials in order to achieve the best results. By following the steps outlined in this article, you can restore your gun to its former glory and protect it from further rust and corrosion.

Here are some key takeaways from this article:

• Perma Blue is a chemical bluing solution that can be used to reblue guns.
• The process of rebluing a gun with Perma Blue involves cleaning the gun, applying the bluing solution, and heating the gun to activate the solution.
• It is important to follow the steps carefully and use the correct materials in order to achieve the best results.
• By rebluing your gun with Perma Blue, you can restore it to its former glory and protect it from further rust and corrosion.