How to Restore the Shine to a Nickel-Plated Gun

ByBuffalo Rifles Blog

How to Polish a Nickel Plated Gun

The gleaming nickel plating on a gun is a thing of beauty, but it can easily become tarnished and dull over time. If you want to keep your gun looking its best, you’ll need to polish it regularly. Polishing a nickel plated gun is a relatively simple process, but it does require some care and attention to detail. In this article, we’ll walk you through the steps of polishing a nickel plated gun, so you can get your firearm looking like new again.

We’ll start by discussing the materials you’ll need, then we’ll walk you through the steps of the polishing process. We’ll also provide some tips and tricks to help you get the best results. So, if you’re ready to learn how to polish a nickel plated gun, read on!

Step Materials Instructions
1
  • Cleaning cloth
  • Gun oil
  • Soft toothbrush
  • Flitz metal polish
  1. Wipe down the gun with a clean cloth to remove any dirt or debris.
  2. Apply a small amount of gun oil to the cloth and rub it over the nickel plating.
  3. Use a soft toothbrush to gently brush away any stubborn dirt or grime.
  4. Apply a small amount of Flitz metal polish to the cloth and rub it over the nickel plating.
  5. Wipe away the excess polish with a clean cloth.
2
  • Scotch-Brite pad
  • Water
  1. Wipe down the gun with a clean cloth to remove any dirt or debris.
  2. Dampen a Scotch-Brite pad with water and rub it over the nickel plating.
  3. Wipe away the excess water with a clean cloth.
3
  • Wax
  1. Apply a thin layer of wax to the nickel plating.
  2. Allow the wax to dry completely.
  3. Buff the gun with a clean cloth to shine the nickel plating.

Tools and Materials Needed

To polish a nickel-plated gun, you will need the following tools and materials:

  • A soft cloth, such as a microfiber cloth
  • A polishing compound, such as Brasso or Mothers Mag Polish
  • A polishing wheel, such as a Dremel tool or a bench grinder
  • A buffing wheel, such as a felt wheel or a wool wheel
  • Mineral oil or gun oil

Preparation

Before you begin polishing your gun, it is important to prepare the surface by removing any dirt, grease, or oil. You can do this by wiping the gun down with a soft cloth dampened with mineral oil or gun oil. If the gun is particularly dirty, you may need to use a degreaser or a solvent to remove the dirt and grease.

Once the gun is clean, you can begin polishing it.

Polishing

To polish the gun, apply a small amount of polishing compound to the soft cloth. Then, using the polishing wheel, rub the compound in a circular motion over the nickel plating. Be sure to work in small areas and to keep the polishing wheel moving at a constant speed.

Continue polishing the gun until the nickel plating is shiny and free of scratches. If the nickel plating is heavily corroded or damaged, you may need to use a more aggressive polishing compound or a rotary tool with a polishing attachment.

Buffing

Once you have finished polishing the gun, you can buff it to a high shine. To do this, use a buffing wheel and a polishing compound that is designed for buffing. Rub the buffing compound in a circular motion over the nickel plating until the gun is shiny and smooth.

Polishing a nickel-plated gun is a relatively simple process, but it is important to take your time and to use the correct tools and materials. By following these steps, you can restore your gun to its original shine.

Polishing

Nickel plating is a popular way to protect firearms from corrosion and wear. However, over time, the nickel plating can become dull and scratched. Polishing the nickel plating can restore its shine and protect it from further damage.

To polish nickel plating, you will need the following materials:

  • A soft cloth
  • A polishing compound
  • A polishing wheel
  • A drill

1. First, clean the firearm with a mild soap and water solution. Be sure to remove all dirt, grease, and oil from the surface of the nickel plating.
2. Next, apply a small amount of polishing compound to the soft cloth.
3. Using the polishing wheel, buff the nickel plating in a circular motion until it shines.
4. Repeat steps 2-3 until the nickel plating is restored to its original shine.

Be sure to use a light touch when polishing the nickel plating. Applying too much pressure can damage the plating.

Finishing

Once you have polished the nickel plating, you will need to protect it from further damage. You can do this by applying a clear coat sealant.

To apply a clear coat sealant, you will need the following materials:

  • A clear coat sealant
  • A paintbrush

1. First, clean the firearm with a mild soap and water solution. Be sure to remove all dirt, grease, and oil from the surface of the nickel plating.
2. Next, apply a thin coat of clear coat sealant to the nickel plating.
3. Allow the sealant to dry completely before handling the firearm.

Be sure to follow the manufacturer’s instructions for applying the clear coat sealant.

Polishing and finishing nickel plating is a simple process that can help to protect your firearm from corrosion and wear. By following these steps, you can restore the shine to your nickel-plated firearm and keep it looking its best for years to come.

How do I polish a nickel plated gun?

To polish a nickel plated gun, you will need the following materials:

  • A soft cloth
  • A polishing compound
  • A polishing wheel
  • A buffing wheel
  • A gun cleaning solvent

1. First, clean the gun with a gun cleaning solvent.
2. Then, apply a small amount of polishing compound to the soft cloth.
3. Rub the polishing compound over the nickel plating in a circular motion.
4. Use the polishing wheel to buff the nickel plating until it is shiny.
5. Finally, use the buffing wheel to remove any remaining polishing compound.

What is the best polishing compound for nickel plated guns?

There are a variety of polishing compounds available on the market. Some of the best polishing compounds for nickel plated guns include:

  • Mothers Mag & Aluminum Polish
  • Blue Magic Metal Polish
  • Flitz Metal Polish

These polishing compounds are designed to remove oxidation and tarnish from nickel plating, leaving the gun looking shiny and new.

How often should I polish my nickel plated gun?

The frequency with which you should polish your nickel plated gun depends on how often you use it. If you use your gun regularly, you should polish it every few months. If you only use your gun occasionally, you can polish it less frequently.

What can I do to prevent my nickel plated gun from tarnishing?

There are a few things you can do to prevent your nickel plated gun from tarnishing:

  • Store your gun in a dry place.
  • Avoid exposing your gun to moisture.
  • Use a gun cleaning solvent to clean your gun regularly.
  • Polish your gun with a polishing compound every few months.

By following these tips, you can help to keep your nickel plated gun looking shiny and new for years to come.

Polishing a nickel-plated gun is a relatively simple process, but it is important to do it correctly to avoid damaging the finish. By following the steps in this guide, you can restore your gun to its former glory and protect it from future corrosion.

Here are the key takeaways from this guide:

  • Nickel plating is a protective finish that can help to prevent corrosion.
  • Polishing a nickel-plated gun can help to remove scratches and blemishes.
  • It is important to use the correct polishing compound and method for the best results.
  • Be sure to clean the gun thoroughly before and after polishing.
  • Polishing a nickel-plated gun can be a rewarding project that will help to keep your firearm in good condition.

Similar Posts