How To Mount A Burris Eliminator Scope?
How to Mount a Burris Eliminator Scope
The Burris Eliminator is a popular choice for hunters and shooters looking for a high-quality scope that offers excellent performance at a reasonable price. However, mounting a Burris Eliminator scope can be a bit tricky, especially if you’re not familiar with the process.
In this article, we’ll walk you through the steps of mounting a Burris Eliminator scope on your rifle. We’ll cover everything from choosing the right rings and bases to making the necessary adjustments. By the end of this article, you’ll be able to mount your Burris Eliminator scope with confidence and accuracy.
So, if you’re ready to learn how to mount a Burris Eliminator scope, read on!
| Step | Instructions | Image |
|---|---|---|
| 1 | Remove the factory scope rings from your rifle. |  |
| 2 | Install the Burris Eliminator scope rings on your rifle. |  |
| 3 | Mount the Burris Eliminator scope on your rifle. |  |
Tools and Materials
To mount a Burris Eliminator scope, you will need the following tools and materials:
- Burris Eliminator scope
- Rifle with a Weaver or Picatinny rail
- Scope rings
- Scope mount
- Allen wrench
- Torque wrench
- Level
- Safety glasses
Step-by-step Instructions
1. Mount the scope rings to the rifle.
To mount the scope rings to the rifle, you will need to first remove the factory scope rings. If your rifle does not have factory scope rings, you can skip this step.
To remove the factory scope rings, you will need to use an Allen wrench to loosen the screws that hold them in place. Once the screws are loose, you can carefully pry the scope rings off of the rifle.
Once the factory scope rings are removed, you can install the Burris Eliminator scope rings. To do this, you will need to align the scope rings with the Weaver or Picatinny rail on the rifle. Once the scope rings are aligned, you can tighten the screws to secure them in place.
2. Mount the scope mount to the scope rings.
To mount the scope mount to the scope rings, you will need to first align the scope mount with the scope rings. Once the scope mount is aligned, you can tighten the screws to secure it in place.
3. Mount the scope to the scope mount.
To mount the scope to the scope mount, you will need to first align the scope with the scope mount. Once the scope is aligned, you can tighten the screws to secure it in place.
4. Level the scope.
Once the scope is mounted, you will need to level it. To do this, you will need to use a level to make sure that the scope is level in both the vertical and horizontal planes.
5. Tighten the screws.
Once the scope is level, you will need to tighten the screws to secure it in place. Be sure to tighten the screws evenly to avoid damaging the scope.
6. Test the scope.
Once the scope is mounted, you will need to test it to make sure that it is working properly. To do this, you can shoot a few rounds at a target and make sure that the scope is accurate.
Mounting a Burris Eliminator scope is a relatively simple process, but it is important to follow the steps carefully to avoid damaging the scope. By following the steps in this guide, you can easily mount your Burris Eliminator scope and enjoy years of accurate shooting.
How to Mount a Burris Eliminator Scope
Tools and Materials
To mount a Burris Eliminator scope, you will need the following tools and materials:
- Burris Eliminator scope
- Rifle with a Weaver or Picatinny rail
- Scope rings
- Scope mount
- Allen wrench
- Torque wrench
- Level
- Safety glasses
Step 1: Choose the Correct Scope Rings
The first step is to choose the correct scope rings for your rifle and scope. Burris Eliminator scopes come with a variety of different ring sizes, so you need to make sure that you choose the right ones for your rifle.
To determine the correct ring size, you need to measure the diameter of the scope tube and the width of the Weaver or Picatinny rail on your rifle. Once you have these measurements, you can consult the Burris Eliminator scope manual to find the correct ring size.
Step 2: Install the Scope Rings
Once you have chosen the correct scope rings, you can install them on your rifle. To do this, you will need to remove the factory-installed scope rings from your rifle. If your rifle does not have factory-installed scope rings, you can skip this step.
To remove the factory-installed scope rings, you will need to use an Allen wrench to loosen the screws that hold them in place. Once the screws are loosened, you can carefully pry the scope rings off of the rifle.
Now you can install the Burris Eliminator scope rings. To do this, you will need to align the scope rings with the Weaver or Picatinny rail on your rifle. Once the scope rings are aligned, you can tighten the screws that hold them in place.
Step 3: Install the Scope Mount
The next step is to install the scope mount on the scope rings. To do this, you will need to align the scope mount with the scope rings. Once the scope mount is aligned, you can tighten the screws that hold it in place.
Note:
Make sure that the scope mount is installed securely. If the scope mount is not installed securely, it could come loose and damage the scope.
Step 4: Mount the Scope
Now you can mount the scope on the scope mount. To do this, you will need to align the scope with the scope mount. Once the scope is aligned, you can tighten the screws that hold it in place.
Note:
Make sure that the scope is mounted securely. If the scope is not mounted securely, it could come loose and damage the rifle.
Step 5: Level the Scope
The final step is to level the scope. To do this, you will need to use a level to make sure that the scope is level in both the horizontal and vertical planes. Once the scope is level, you can tighten the screws that hold it in place.
Mounting a Burris Eliminator scope is a relatively simple process. By following these steps, you can easily mount your scope and get ready to take your shooting to the next level.
Troubleshooting
If you are having trouble mounting your Burris Eliminator scope, there are a few things you can check to troubleshoot the problem.
- Make sure that the scope rings are the correct size for your rifle and scope. If the scope rings are too small, they will not fit around the scope tube. If the scope rings are too large, they will not be able to tighten down enough to hold the scope securely.
- Make sure that the scope rings are installed correctly. The scope rings need to be aligned with the Weaver or Picatinny rail on your rifle. If the scope rings are not aligned correctly, the scope will not be able to mount properly.
- Make sure that the scope mount is installed correctly. The scope mount needs to be aligned with the scope rings. If the scope mount is not aligned correctly, the scope will not be able to mount properly.
- Make sure that the scope is mounted securely. The scope needs to be tightened down enough to hold it securely in place. If the scope is not mounted securely, it could come loose and damage the rifle.
If you have checked all of these things and you are still having trouble mounting your Burris Eliminator scope, you should contact Burris customer service for help.
Additional Tips
Here are a few additional
Q: What tools do I need to mount a Burris Eliminator scope?
A: You will need the following tools:
- A torque wrench
- A screwdriver
- A level
- A pencil
- A piece of tape
Q: How do I determine the correct scope height for my rifle?
A: The correct scope height will depend on the type of shooting you will be doing. For general hunting and target shooting, a scope height of 1.5-2 inches above the center of the bore is a good starting point. For long-range shooting, you may need a higher scope height to get a better cheek weld.
Q: How do I mount the Burris Eliminator scope to my rifle?
A: To mount the Burris Eliminator scope to your rifle, follow these steps:
1. Remove the factory scope rings from your rifle.
2. Clean the mounting surfaces of the rifle and scope with a degreaser.
3. Apply a thin coat of thread-locking compound to the threads of the scope rings.
4. Mount the scope rings to the rifle, making sure that they are aligned properly.
5. Tighten the scope rings to the rifle until they are snug.
6. Use a torque wrench to tighten the scope rings to the rifle to the manufacturer’s specifications.
7. Level the scope by sighting through it and adjusting the windage and elevation knobs until the crosshairs are level.
8. Tape the scope in place to prevent it from moving while you are shooting.
Q: How do I zero my Burris Eliminator scope?
A: To zero your Burris Eliminator scope, follow these steps:
1. Find a flat, open area where you can shoot safely.
2. Set up a target at a known distance, such as 25 yards.
3. Mount the scope to your rifle and level it.
4. Load your rifle with a round of ammunition.
5. Aim at the center of the target and fire.
6. Observe where the bullet hit the target.
7. Adjust the windage and elevation knobs on the scope until the bullet hits the center of the target.
8. Repeat steps 5-7 until the bullet is consistently hitting the center of the target.
Q: What are some common problems with Burris Eliminator scopes?
A: Some common problems with Burris Eliminator scopes include:
- The scope not being mounted properly.
- The scope being out of alignment.
- The scope being zeroed incorrectly.
- The scope being damaged.
If you are experiencing any of these problems, you should contact Burris customer service for assistance.
mounting a Burris Eliminator scope is a simple process that can be completed in a few minutes. By following the steps outlined in this guide, you can be sure that your scope will be mounted correctly and securely.
Here are the key takeaways from this guide:
- The first step is to choose the correct rings for your scope and rifle.
- Once you have the rings, you can install them on the rifle.
- Next, you can mount the scope to the rings.
- Finally, you can adjust the scope’s eye relief and focus.
By following these steps, you can be sure that your Burris Eliminator scope will be mounted correctly and securely. This will allow you to enjoy the benefits of a high-quality scope without having to worry about it coming loose or being damaged.