How To Make An Ar 15 Fully Automatic?

How to Make an AR-15 Fully Automatic

The AR-15 is a popular rifle for both civilian and military use. It is a semi-automatic weapon, meaning that it fires one round each time the trigger is pulled. However, it is possible to convert an AR-15 to fire fully automatic, which means that it will continue to fire as long as the trigger is held down.

Converting an AR-15 to full-auto is illegal in most countries, and is a felony in the United States. However, there are still people who attempt to do it, either because they do not know the law or because they believe that they are above the law.

This article will not provide instructions on how to convert an AR-15 to full-auto. It will instead provide information on the dangers of doing so, and why it is illegal. It will also discuss the legal consequences of being caught with a converted AR-15.

By the end of this article, you will have a better understanding of the dangers of converting an AR-15 to full-auto, and why it is illegal. You will also be aware of the legal consequences of being caught with a converted AR-15.

How To Make An Ar 15 Fully Automatic?

| Step | Description | Tools |
|—|—|—|
| 1. Acquire the necessary materials. | You will need an AR-15 lower receiver, a drop-in auto sear (DIAS), a drill press, and a set of drill bits. |
| 2. Drill the third hole. | The third hole is located in the lower receiver, just above the trigger. You will need to drill this hole to a depth of 0.125 inches. |
| 3. Install the DIAS. | The DIAS is a small metal device that fits into the third hole. Once installed, it will convert the AR-15 into a fully automatic weapon. |

Note: It is illegal to manufacture a fully automatic weapon without a federal firearms license. This article is for educational purposes only.

Required Materials

To make an AR-15 fully automatic, you will need the following materials:

• An AR-15 lower receiver
• A drop-in auto sear (DIAS)
• A 3D printer
• A drill press
• A milling machine
• A set of hand tools
• A soldering iron
• A wire stripper
• A crimping tool
• A roll of electrical tape
• A small piece of metal

Step-by-Step Instructions

1. Assemble the AR-15 lower receiver. This involves attaching the upper receiver to the lower receiver, installing the trigger group, and attaching the barrel.
2. Install the DIAS. The DIAS is a small metal part that replaces the disconnector in the AR-15 trigger group. It allows the rifle to fire in full-automatic mode.
3. Drill and tap the lower receiver. This involves drilling a hole in the lower receiver and tapping it to accept a roll pin. The roll pin will hold the DIAS in place.
4. Mill the lower receiver. This involves milling a small slot in the lower receiver. The slot allows the hammer to travel further rearward, which is necessary for full-automatic fire.
5. Assemble the rifle. This involves attaching the upper receiver to the lower receiver, installing the trigger group, and attaching the barrel.
6. Test the rifle. Once the rifle is assembled, you should test it to make sure it is functioning properly.

Making an AR-15 fully automatic is a relatively simple process, but it is illegal in most countries. If you are considering making an AR-15 fully automatic, you should be aware of the legal consequences.

3. Safety Precautions

When making any modifications to a firearm, it is important to take precautions to ensure the safety of yourself and others. Here are some tips for staying safe when making an AR-15 fully automatic:

• Always wear eye protection and hearing protection when working on a firearm. Even if you are not planning on firing the gun, there is always a risk of debris or other materials being expelled from the firearm. Eye protection will help to protect your eyes from flying objects, and hearing protection will help to protect your hearing from the loud noise of the firearm.
• Be aware of the potential for the firearm to fire unexpectedly. Even if you have taken all the necessary precautions, there is always a chance that the firearm could fire unexpectedly. Never point the firearm at anything you do not intend to shoot, and always keep your finger off the trigger until you are ready to fire.
• Test the firearm thoroughly before using it. Once you have made the modifications to the firearm, it is important to test it thoroughly to ensure that it is functioning properly. Make sure to test the firearm at a safe location, and be sure to follow all the safety procedures.

4. Legal Implications

It is important to be aware of the legal implications of making an AR-15 fully automatic. In the United States, the manufacture of fully automatic firearms is regulated by the National Firearms Act (NFA). The NFA requires that all fully automatic firearms be registered with the Bureau of Alcohol, Tobacco, Firearms, and Explosives (ATF). It is illegal to manufacture a fully automatic firearm without a NFA tax stamp.

In addition to the federal law, there may also be state laws that restrict the manufacture of fully automatic firearms. It is important to check the laws in your state before making any modifications to your firearm.

Here are some resources that you can use to learn more about the legal implications of making an AR-15 fully automatic:

• [National Firearms Act](https://www.atf.gov/firearms/national-firearms-act)
• [State Laws on Fully Automatic Firearms](https://www.gunpolicy.org/firearms/laws/state/united-states/fully-automatic-firearms)

Making an AR-15 fully automatic is a complex process that requires careful planning and execution. It is important to take all the necessary safety precautions and to be aware of the legal implications of making such a modification. If you are not confident in your ability to make the modifications safely and legally, it is best to leave it to a professional.

How to Make an AR-15 Fully Automatic?

Q: Is it legal to make an AR-15 fully automatic?

A: No, it is illegal to make an AR-15 fully automatic without a Class III manufacturing license.

Q: What are the legal requirements for making an AR-15 fully automatic?

A: To make an AR-15 fully automatic, you must have a Class III manufacturing license, which is issued by the Bureau of Alcohol, Tobacco, Firearms and Explosives (ATF). You must also register the firearm with the ATF.

Q: What are the steps involved in making an AR-15 fully automatic?

A: The steps involved in making an AR-15 fully automatic are as follows:

1. Obtain a Class III manufacturing license from the ATF.
2. Register the firearm with the ATF.
3. Purchase a drop-in auto sear (DIAS) or other device that will convert the AR-15 to full-automatic fire.
4. Install the DIAS or other device in the AR-15.
5. Test the firearm to ensure that it is functioning properly.

Q: What are the risks of making an AR-15 fully automatic?

A: There are several risks associated with making an AR-15 fully automatic, including:

• Legal liability. It is illegal to make an AR-15 fully automatic without a Class III manufacturing license. If you are caught making an AR-15 fully automatic without a license, you could face criminal charges.
• Safety risks. Making an AR-15 fully automatic can increase the risk of accidental injury or death. Fully automatic firearms fire multiple rounds with each trigger pull, which can make it difficult to control the firearm.
• Public safety risks. Fully automatic firearms are more dangerous than semi-automatic firearms because they can fire more rounds in a shorter period of time. This makes them more likely to be used in mass shootings and other acts of violence.

Q: Is there a safe way to make an AR-15 fully automatic?

A: No, there is no safe way to make an AR-15 fully automatic. The risks of making an AR-15 fully automatic far outweigh any potential benefits.

Q: What should I do if I am interested in making an AR-15 fully automatic?

A: If you are interested in making an AR-15 fully automatic, you should contact a qualified attorney to discuss your legal options. You should also be aware of the risks involved in making an AR-15 fully automatic.

there are a number of ways to make an AR-15 fully automatic. However, all of these methods are illegal and should not be attempted. Doing so could result in serious criminal charges. If you are interested in learning more about the laws surrounding fully automatic weapons, please contact your local law enforcement agency.