How To Make 35 Remington Brass?
Have you ever wanted to make your own 35 Remington brass? It’s not as difficult as you might think! In this article, I will walk you through the steps of making your own 35 Remington brass from start to finish. I’ll cover everything you need to know, from gathering the materials to loading and firing your finished cartridges. So if you’re ready to learn how to make your own 35 Remington brass, read on!
| Step | Materials | Instructions |
|---|---|---|
| 1 |
|
|
35 Remington brass is a type of brass cartridge case that is used for the .35 Remington rifle cartridge. It is a rimless cartridge case, meaning that it does not have a rim around the base. This makes it easier to extract from the chamber after firing. 35 Remington brass is made from a variety of materials, including brass, copper, and nickel.
The process of making 35 Remington brass is relatively simple. It starts with a piece of brass rod or bar. This rod is then turned on a lathe to create the basic shape of the cartridge case. The case is then drilled and tapped to create the primer pocket and the flash hole. Finally, the case is filed and polished to create a smooth finish.
Making 35 Remington brass is a relatively straightforward process, but it does require some specialized tools and equipment. If you are not comfortable working with tools or machinery, it is best to leave the job to a professional.
Materials and Equipment
The following materials and equipment are required to make 35 Remington brass:
- Brass rod or bar
- Lathe
- Chuck
- Cutting tools
- Drill press
- Tap and die set
- Filing and polishing tools
- Safety glasses
- Face shield
- Ear protection
Steps
The following steps are involved in making 35 Remington brass:
1. Turn the brass rod on a lathe.
The first step is to turn the brass rod on a lathe to create the basic shape of the cartridge case. The rod should be turned to a diameter of .358 inches. The length of the case should be approximately 1.25 inches.
2. Drill and tap the case.
The next step is to drill and tap the case. The primer pocket should be drilled to a depth of .050 inches. The flash hole should be tapped to a diameter of .013 inches.
3. File and polish the case.
The final step is to file and polish the case to create a smooth finish. This can be done with a variety of files and polishing compounds.
Making 35 Remington brass is a relatively simple process, but it does require some specialized tools and equipment. If you are not comfortable working with tools or machinery, it is best to leave the job to a professional.
Here are some additional tips for making 35 Remington brass:
- Use quality materials. The quality of the brass rod or bar will directly affect the quality of the finished cartridge case.
- Use the correct tools. Make sure that you have the correct tools for the job. Using the wrong tools can damage the brass rod or bar.
- Take your time. Making 35 Remington brass is a process that takes time. Don’t rush the process or you will end up with a poor quality product.
By following these tips, you can make high-quality 35 Remington brass that will perform well in your rifle.
3. Cut the brass rod to the desired length.
Once you have the correct diameter of brass rod, you need to cut it to the desired length. The length of the brass rod will depend on the cartridge you are reloading. For example, a .35 Remington cartridge case is 1.165 inches long, so you would need to cut the brass rod to 1.165 inches long.
To cut the brass rod, you can use a hacksaw or a bandsaw. If you are using a hacksaw, make sure to use a fine-toothed blade and take your time. It is important to cut the brass rod straight so that it will fit properly in the reloading press.
If you are using a bandsaw, make sure to set the blade speed to a slow speed. This will help to prevent the brass rod from overheating and becoming brittle.
Once you have cut the brass rod to the desired length, you can move on to the next step.
4. Turn the brass rod on the lathe to create a cylindrical blank.
The next step is to turn the brass rod on the lathe to create a cylindrical blank. This will create the basic shape of the cartridge case.
To turn the brass rod, you will need to mount it in the lathe chuck. Make sure that the brass rod is centered in the chuck and that it is tight.
Once the brass rod is mounted in the chuck, you can start turning it on the lathe. Use a cutting tool to remove material from the brass rod until you have created a cylindrical blank.
The diameter of the cylindrical blank will depend on the cartridge you are reloading. For example, a .35 Remington cartridge case has a diameter of 0.358 inches, so you would need to turn the brass rod to a diameter of 0.358 inches.
Once you have created the cylindrical blank, you can move on to the next step.
In this tutorial, you learned how to make .35 Remington brass. This process is relatively simple, but it does require some specialized tools and equipment. If you are not comfortable using these tools, it is best to have a professional do the work for you.
Once you have made your own .35 Remington brass, you can start reloading your own ammunition. This is a great way to save money and to ensure that you are using the best quality ammunition possible.
Here are some additional tips for making .35 Remington brass:
- Use high-quality brass rod. This will help to ensure that the finished cartridge cases are durable and reliable.
- Take your time when cutting and turning the brass rod. This will help to prevent mistakes.
- Be careful not to overheat the brass rod. This can damage the brass and make it brittle.
- Clean the finished cartridge cases thoroughly before using them. This will help to prevent corrosion and ensure that the ammunition performs properly.
How to Make 35 Remington Brass?
Q: What materials do I need?
A: You will need the following materials:
- 35 Remington brass cases
- 35 Remington reloading dies
- 35 Remington powder
- 35 Remington primers
- 35 Remington bullets
- A reloading press
- A set of reloading dies
- A powder measure
- A primer seater
- A bullet seater
- A case trimmer
- A case neck turner
- A cleaning rod
- A reloading block
- A loading tray
- A scale
- A caliper
- Safety glasses
- Ear protection
Q: What steps do I need to follow?
A: The steps to make 35 Remington brass are as follows:
1. Clean the brass cases.
2. Trim the brass cases to length.
3. Turn the case necks.
4. Prime the cases.
5. Charge the cases with powder.
6. Seat the primers.
7. Seat the bullets.
8. Clean the brass cases.
Q: What are some common mistakes to avoid?
A: Some common mistakes to avoid when making 35 Remington brass include:
- Not cleaning the brass cases properly.
- Trimming the brass cases too short or too long.
- Turning the case necks too much or too little.
- Priming the cases incorrectly.
- Charging the cases with too much or too little powder.
- Seating the primers incorrectly.
- Seating the bullets incorrectly.
- Not cleaning the brass cases after reloading.
Q: What safety precautions should I take?
A: When making 35 Remington brass, it is important to take the following safety precautions:
- Always wear safety glasses and ear protection.
- Keep the reloading area clean and organized.
- Store reloading components in a safe place.
- Follow the instructions on the reloading dies and powder manufacturer’s labels.
- Never smoke or have open flames near the reloading area.
- Be aware of the potential for fire and explosion.
Q: Where can I learn more about reloading 35 Remington brass?
A: There are a number of resources available to learn more about reloading 35 Remington brass. These include:
- Books
- Magazines
- Online forums
- Reloading clubs
- Reloading classes
By following these steps, you can safely and successfully make your own 35 Remington brass.
making your own 35 Remington brass is a relatively simple process that can be completed with a few basic tools and materials. By following the steps outlined in this article, you can save money and have the satisfaction of knowing that you made your own ammunition.
Here are the key takeaways from this article:
- 35 Remington brass can be made from .30-06 casings.
- The process involves trimming the .30-06 casings to length, swaging the necks, and annealing the brass.
- It is important to use the correct tools and materials to ensure that the brass is properly formed and safe to use.
- Making your own 35 Remington brass is a rewarding experience that can save you money and give you the satisfaction of knowing that you made your own ammunition.