How To Field Strip Glock 17?
The Glock 17 is a popular handgun that is used by law enforcement and civilians alike. It is a reliable and easy-to-use firearm, but it is important to know how to properly field strip it for cleaning and maintenance. In this article, we will walk you through the steps of field stripping a Glock 17 in a clear and concise manner. We will also provide some tips on how to keep your Glock 17 in top condition.
So, if you are new to owning a Glock 17 or if you simply want to learn more about how to field strip it, then read on!
| Step | Action | Notes |
|---|---|---|
| 1 | Depress the slide lock and pull the slide back until it is fully retracted. | Be careful not to release the slide lock or the slide will go forward and you will have to start over. |
| 2 | Grasp the front of the slide and pull it straight up and off of the frame. | The recoil spring and guide rod will come out with the slide. |
| 3 | Press down on the trigger and turn the takedown lever clockwise until it is in the vertical position. | The takedown lever is located on the left side of the frame, just below the slide. |
| 4 | Grasp the rear of the slide and pull it straight back until it is disengaged from the frame. | The slide will come off of the frame, leaving the barrel and recoil spring assembly in place. |
| 5 | To reassemble the Glock 17, reverse the steps above. | Be sure to insert the recoil spring and guide rod into the slide before reattaching the slide to the frame. |
The Glock 17 is a popular semi-automatic pistol that is used by law enforcement and military personnel around the world. It is a reliable and easy-to-use gun, but it is important to know how to field strip it in order to clean and maintain it properly.
This guide will show you how to field strip a Glock 17 in a few simple steps. It is important to follow these steps carefully in order to avoid damaging the gun.
Safety Precautions
Before beginning, make sure the gun is unloaded and the safety is engaged.
Wear eye protection to protect your eyes from any debris that may be released during disassembly.
Work in a well-lit area so that you can see clearly what you are doing.
Disassembling the Glock 17
1. Remove the magazine from the gun.
2. Depress the slide lock and pull the slide back until it stops.
3. Press down on the trigger and release the slide lock.
4. The slide can now be removed from the frame.
5. Remove the recoil spring assembly from the slide.
6. Remove the barrel from the slide.
Reassembling the Glock 17
1. Insert the barrel into the slide.
2. Insert the recoil spring assembly into the slide.
3. Slide the slide onto the frame.
4. Engage the slide lock.
5. Insert the magazine into the gun.
Field stripping a Glock 17 is a simple process that can be completed in a few minutes. It is important to follow these steps carefully in order to avoid damaging the gun.
By following these steps, you can keep your Glock 17 in good working order and ensure that it is always ready to use.
Additional Tips
- When cleaning your Glock 17, use a mild detergent and warm water. Do not use harsh chemicals or solvents, as they can damage the gun.
- Be sure to dry the gun thoroughly after cleaning it. Moisture can cause rust and other damage to the gun.
- Store your Glock 17 in a safe place when it is not in use. This will help to protect it from damage and theft.
By following these tips, you can keep your Glock 17 in good working order for many years to come.
How To Field Strip Glock 17?
The Glock 17 is a popular semi-automatic pistol that is used by law enforcement and military personnel around the world. It is a simple and reliable gun that is easy to field strip and clean.
To field strip the Glock 17, you will need the following tools:
- A cleaning rod
- A Glock cleaning kit
- A small screwdriver
Step 1: Remove the magazine
The first step is to remove the magazine from the gun. To do this, press the magazine release button located on the left side of the frame. The magazine will then pop out of the gun.
Step 2: Lock the slide back
The next step is to lock the slide back. To do this, pull the slide back until it stops. Then, use the slide stop lever to lock the slide in place.
Step 3: Remove the slide cover plate
The next step is to remove the slide cover plate. To do this, use the small screwdriver to pry up the slide cover plate. The slide cover plate will then come loose and you can remove it.
Step 4: Remove the recoil spring assembly
The next step is to remove the recoil spring assembly. To do this, grasp the recoil spring assembly with your fingers and pull it out of the slide.
Step 5: Remove the barrel
The next step is to remove the barrel. To do this, grasp the barrel with your fingers and pull it out of the slide.
Step 6: Inspect the parts
Once you have removed all of the parts, inspect them for damage or wear. Replace any parts that are damaged or worn.
Step 7: Reassemble the Glock 17
To reassemble the Glock 17, follow these steps in reverse order.
1. Insert the barrel into the slide.
2. Insert the recoil spring assembly into the slide.
3. Align the slide rails with the frame rails and slide the slide onto the frame.
4. Press down on the slide lock and release the trigger.
5. The slide is now locked in place.
Assembling the Glock 17
To assemble the Glock 17, follow these steps:
1. Insert the barrel into the slide.
2. Insert the recoil spring assembly into the slide.
3. Align the slide rails with the frame rails and slide the slide onto the frame.
4. Press down on the slide lock and release the trigger.
5. The slide is now locked in place.
Reassembling the Magazine
To reassemble the magazine, follow these steps:
1. Insert the magazine follower into the magazine body.
2. Insert the spring into the magazine body.
3. Insert the magazine into the gun.
The Glock 17 is a simple and reliable gun that is easy to field strip and clean. By following these steps, you can quickly and easily maintain your Glock 17.
How To Field Strip Glock 17?
1. Ensure the firearm is unloaded. Check the chamber to make sure there is no round in the gun.
2. Press the slide release lever down and pull the slide back until it stops.
3. Grasp the front of the slide with one hand and the rear of the frame with the other.
4. Push the slide forward while pulling down on the slide release lever. The slide will come off the frame.
5. Remove the recoil spring assembly by pulling it straight up out of the frame.
6. To reassemble the Glock 17, reverse the steps above.
Here are some additional tips for field stripping a Glock 17:
- Be careful not to drop any small parts.
- Keep the firearm pointed in a safe direction at all times.
- If you are unsure how to field strip a Glock 17, consult the owner’s manual or a qualified gunsmith.
FAQs
- What is the difference between field stripping and disassembly? Field stripping is the process of removing the major components of a firearm for cleaning and maintenance. Disassembly is the process of completely removing all of the components of a firearm.
- Can I field strip a Glock 17 without tools? Yes, you can field strip a Glock 17 without tools. However, it is easier to use a small punch or screwdriver to help remove the recoil spring assembly.
- How often should I field strip my Glock 17? It is recommended to field strip your Glock 17 every time you clean it. However, you can also field strip it more often if you want to.
- What should I do if I can’t field strip my Glock 17? If you are unable to field strip your Glock 17, consult the owner’s manual or a qualified gunsmith.
In this blog post, we have discussed how to field strip a Glock 17. We started by discussing the tools and materials you will need. Then, we walked you through the steps of field stripping the Glock 17, step-by-step. Finally, we provided some tips and tricks for field stripping the Glock 17.
We hope that this blog post has been helpful. If you have any questions, please feel free to contact us.