How To Field Strip A Glock 17?

How to Field Strip a Glock 17

The Glock 17 is a popular handgun that is used by law enforcement officers and civilians alike. It is a reliable and easy-to-use firearm, but it is important to know how to properly field strip it for cleaning and maintenance. In this article, we will walk you through the steps of field stripping a Glock 17.

We will provide a step-by-step guide with photos, so you can follow along easily. We will also discuss the importance of field stripping your Glock 17 and how to properly clean and maintain it.

By the end of this article, you will be able to field strip your Glock 17 with confidence. You will also know how to properly clean and maintain it, so you can keep it in top condition.

Step	Action	Notes
1	Remove the magazine.	Ensure the firearm is unloaded.
2	Depress the slide lock lever and pull the slide back to its full rearward position.	The slide will not lock back if the firearm is not unloaded.
3	Grasp the front of the slide and the rear of the frame with your thumbs and forefingers, and then pull the slide forward and off of the frame.	The recoil spring and guide rod will come out with the slide.
4	Press down on the trigger while pulling the trigger housing assembly forward and out of the frame.	The trigger spring and striker assembly will come out with the trigger housing assembly.
5	Rotate the barrel 90 degrees clockwise and remove it from the slide.	The barrel will be under spring tension, so be careful not to let it fly out.

How To Field Strip A Glock 17?

The Glock 17 is a semi-automatic pistol that is chambered in 9mm Luger. It is one of the most popular handguns in the world, and is used by law enforcement and military personnel around the globe. The Glock 17 is a reliable and easy-to-use pistol, and it is relatively simple to field strip for cleaning and maintenance.

In this guide, we will show you how to field strip a Glock 17. We will provide step-by-step instructions, and we will also discuss some safety precautions that you should take when handling a firearm.

Safety Precautions

Before you begin field stripping your Glock 17, there are a few safety precautions that you should take:

• Make sure the gun is unloaded. Check the chamber to make sure there is no round chambered. You can do this by looking through the ejection port, or by feeling the top of the slide to see if there is a round in the chamber.
• Clear the magazine. Remove the magazine from the gun and visually inspect it to make sure there are no rounds in it.
• Lock the slide back. With the magazine removed, pull the slide back and hold it in place. This will prevent the gun from firing accidentally.

Field Stripping the Glock 17

Now that you have taken the necessary safety precautions, you can begin field stripping the Glock 17. Follow these steps:

1. Remove the magazine. Press the magazine release button located on the left side of the frame, and then pull the magazine out of the gun.
2. Lock the slide back. With the magazine removed, pull the slide back and hold it in place.
3. Press the disassembly lever. The disassembly lever is located on the left side of the frame, just below the slide. Press the disassembly lever down, and then slide the slide forward off of the frame.
4. Remove the barrel. The barrel is held in place by a spring and two pins. The spring is located in the front of the frame, and the pins are located at the rear of the frame. To remove the barrel, depress the spring with a small tool, and then push out the pins. The barrel can then be removed from the slide.
5. Remove the recoil spring assembly. The recoil spring assembly is located in the rear of the slide. To remove it, depress the spring with a small tool, and then slide it out of the slide.

That’s it! You have now successfully field stripped your Glock 17.

Reassembling the Glock 17

Reassembling the Glock 17 is the reverse of field stripping it. Follow these steps:

1. Insert the recoil spring assembly into the slide. Make sure that the spring is oriented correctly.
2. Insert the barrel into the slide. Make sure that the barrel is seated all the way in.
3. Push the pins into the rear of the frame. Make sure that the pins are fully seated.
4. Slide the slide forward onto the frame. Make sure that the slide is locked in place.
5. Insert the magazine. Press the magazine release button, and then insert the magazine into the gun.

That’s it! You have now successfully reassembled your Glock 17.

Field stripping your Glock 17 is a simple process that can be completed in a few minutes. It is important to follow the safety precautions outlined in this guide to prevent any accidents. By following these steps, you can safely and effectively field strip your Glock 17 for cleaning and maintenance.

3.1 Unload the Glock 17

Before you can field strip your Glock 17, you need to make sure that it is unloaded. To do this, follow these steps:

1. Remove the magazine from the gun.
2. Press the slide lock lever down and pull the slide back until it stops.
3. Look inside the chamber to make sure that there is no round in it.
4. Release the slide lock lever and let the slide go forward.

Once you have confirmed that the gun is unloaded, you can proceed to field strip it.

3.2 Field Strip the Glock 17

To field strip your Glock 17, follow these steps:

1. Grip the slide firmly with both hands and pull it back until it stops.
2. Press the takedown lever down and rotate it 90 degrees clockwise.
3. Continue to pull the slide back until it comes off of the frame.
4. Remove the recoil spring assembly from the slide.
5. Remove the barrel from the slide.
6. Remove the striker assembly from the frame.

Your Glock 17 is now field stripped.

3.3 Reassemble the Glock 17

To reassemble your Glock 17, follow these steps:

1. Insert the striker assembly into the frame.
2. Insert the barrel into the slide.
3. Insert the recoil spring assembly into the slide.
4. Rotate the takedown lever 90 degrees counterclockwise.
5. Push the slide forward until it locks into place.
6. Release the slide lock lever.

Your Glock 17 is now reassembled.

Field stripping your Glock 17 is a simple process that can be completed in a few minutes. It is important to field strip your gun regularly to clean it and ensure that it is functioning properly. By following these steps, you can safely field strip and reassemble your Glock 17.

How To Field Strip A Glock 17?

1. What do I need to field strip a Glock 17?

To field strip a Glock 17, you will need the following tools:

• A Glock Armorer’s Tool or a small punch
• A cleaning cloth or rag
• A small amount of gun oil

2. How do I field strip a Glock 17?

To field strip a Glock 17, follow these steps:

1. Ensure that the firearm is unloaded.
2. Depress the slide lock lever and pull the slide back to its full rearward position.
3. Rotate the takedown lever down until it is flush with the frame.
4. While holding the slide back, release the slide lock lever and allow the slide to move forward.
5. The slide will now be separated from the frame.
6. Remove the recoil spring assembly by depressing the spring guide rod and pulling it out of the slide.
7. Remove the barrel by pulling it out of the slide.

3. **What should I do after I field strip my Glock 17?

After you have field stripped your Glock 17, you should clean and lubricate it according to the manufacturer’s instructions.

4. **What are some common problems people have when field stripping a Glock 17?

Some common problems people have when field stripping a Glock 17 include:

• Not depressing the slide lock lever all the way down when rotating the takedown lever.
• Not releasing the slide lock lever before allowing the slide to move forward.
• Not depressing the spring guide rod when removing the recoil spring assembly.
• Not pulling the barrel out of the slide all the way.

5. **How can I avoid these problems?

To avoid these problems, follow these tips:

• Make sure that you are depressing the slide lock lever all the way down when rotating the takedown lever.
• Release the slide lock lever before allowing the slide to move forward.
• Depress the spring guide rod when removing the recoil spring assembly.
• Pull the barrel out of the slide all the way.

6. **What are some additional tips for field stripping a Glock 17?

Here are some additional tips for field stripping a Glock 17:

• Use a cleaning cloth or rag to wipe down the internal components of the firearm before reassembling it.
• Apply a small amount of gun oil to the internal components of the firearm before reassembling it.
• Be careful not to lose any small parts when field stripping or reassembling the firearm.

7. **Where can I learn more about field stripping a Glock 17?

You can learn more about field stripping a Glock 17 by reading the owner’s manual or by watching instructional videos online. You can also find helpful information by contacting your local gun dealer or range.

field stripping a Glock 17 is a simple process that can be completed in a few minutes. By following the steps outlined in this article, you can safely and effectively disassemble your Glock 17 for cleaning, maintenance, or storage.

Here are the key takeaways from this article:

• Always make sure the Glock 17 is unloaded and safe to handle before beginning field stripping.
• Use a cleaning mat to protect your work surface from potential damage.
• Follow the steps in the correct order to avoid damaging your Glock 17.
• Be careful not to lose any small parts during disassembly.
• Reassemble your Glock 17 in the reverse order of disassembly.

By following these steps, you can safely and effectively field strip your Glock 17.