How To Disassemble Glock 43?

How to Disassemble a Glock 43

The Glock 43 is a popular concealed carry pistol, and for good reason. It’s small, lightweight, and easy to shoot. But like all firearms, it’s important to know how to properly disassemble it for cleaning and maintenance.

In this article, we’ll walk you through the steps of disassembling a Glock 43. We’ll provide detailed instructions and images, so you can follow along easily.

Before you begin, make sure the gun is unloaded and the safety is engaged.

Once you’ve verified that the gun is safe, you can begin disassembly.

Step 1: Remove the magazine

The first step is to remove the magazine from the gun. To do this, press the magazine release button located on the left side of the frame. The magazine will pop out of the gun.

Step 2: Lock the slide back

The next step is to lock the slide back. To do this, pull the slide back until it stops. Then, use the slide stop lever to lock the slide in place.

Step 3: Remove the slide stop lever

Now that the slide is locked back, you can remove the slide stop lever. To do this, use a small flathead screwdriver to pry the lever up and out of the slide.

Step 4: Remove the barrel

With the slide stop lever removed, you can now remove the barrel. To do this, grasp the front of the barrel and pull it straight out of the slide.

Step 5: Remove the recoil spring assembly

The recoil spring assembly is located inside the rear of the slide. To remove it, use a small flathead screwdriver to pry up the two tabs on the side of the assembly. Then, slide the assembly out of the slide.

Step 6: Remove the striker assembly

The striker assembly is located in the center of the slide. To remove it, use a small flathead screwdriver to pry up the two tabs on the side of the assembly. Then, slide the assembly out of the slide.

Step 7: Reassemble the Glock 43

To reassemble the Glock 43, simply reverse the steps above. Be sure to follow the instructions carefully, and make sure that the gun is properly assembled before you use it.

Disassembling a Glock 43 is a simple process, but it’s important to follow the steps carefully to avoid damaging the gun. By following the instructions in this article, you can safely disassemble and reassemble your Glock 43 in no time.

Step	Instructions	Image
1	Ensure the firearm is unloaded and the magazine is removed.
2	Depress the slide lock lever and pull the slide back until it stops.
3	Rotate the takedown lever 90 degrees clockwise.
4	Remove the slide from the frame.
5	To reassemble the Glock 43, reverse the steps above.

The Glock 43 is a striker-fired, semi-automatic pistol chambered in 9mm Luger. It is a popular choice for concealed carry due to its small size and light weight. However, like all firearms, the Glock 43 must be disassembled for cleaning and maintenance. This guide will walk you through the disassembly process in detail, with step-by-step instructions and photos.

Safety Precautions

Before you begin disassembling your Glock 43, there are a few safety precautions you should take:

• Always keep the firearm pointed in a safe direction. This means away from yourself, other people, and any animals.
• Remove the magazine and ensure the chamber is empty. This will prevent any accidental discharge.
• Disassemble the firearm only when necessary. Disassembly should only be performed for cleaning, maintenance, or repairs.
• Follow the steps in the disassembly and reassembly instructions carefully. This will help you avoid damaging the firearm.

Disassembly Steps

To disassemble your Glock 43, follow these steps:

1. Remove the slide stop lever. To do this, press down on the slide stop lever and pull it out to the side.
2. Remove the slide. To do this, grasp the slide firmly with both hands and pull it back and up until it disengages from the frame.
3. Remove the barrel and recoil spring assembly. To do this, depress the trigger and pull the barrel and recoil spring assembly out of the slide.
4. Remove the striker assembly. To do this, grasp the striker assembly with your fingers and pull it out of the slide.

Reassembly

To reassemble your Glock 43, follow these steps:

1. Insert the striker assembly into the slide.
2. Insert the barrel and recoil spring assembly into the slide.
3. Push the slide forward until it engages with the frame.
4. Push up on the slide stop lever to lock the slide in place.

Disassembling and reassembling your Glock 43 is a relatively simple process. By following the steps in this guide, you can safely and effectively maintain your firearm.

Here are some additional tips for disassembling and reassembling your Glock 43:

• Use a clean, dry cloth to wipe down the firearm before and after disassembly.
• Be careful not to drop any small parts during disassembly.
• If you are unsure about any of the steps, consult the owner’s manual for your Glock 43.

By following these tips, you can keep your Glock 43 in good working order and ensure its safety.

How To Disassemble Glock 43?

Disassembly Steps

To disassemble a Glock 43, follow these steps:

1. Remove the magazine from the firearm.
2. Depress the trigger and lock the slide back.
3. Press the disassembly lever down and slide the slide forward off the frame.
4. Remove the striker assembly from the slide.
5. Remove the barrel and recoil spring assembly from the slide.
6. Remove the slide stop lever from the frame.

Reassembly Steps

To reassemble a Glock 43, follow these steps:

1. Insert the striker assembly into the slide.
2. Insert the barrel and recoil spring assembly into the slide.
3. Insert the slide onto the frame.
4. Engage the slide stop lever.

Cleaning and Lubrication

To clean a Glock 43, follow these steps:

1. Clean the firearm with a dry cloth or brush.
2. Lubricate the firearm with a light oil.
3. Store the firearm in a safe place.

By following these steps, you can safely and effectively disassemble, clean, and lubricate your Glock 43.

Here are some additional tips for Glock 43 owners:

• Always wear eye protection when cleaning your firearm.
• Never dry fire your firearm without a loaded magazine.
• Store your firearm in a safe place when not in use.

For more information on Glock 43 disassembly, cleaning, and lubrication, please consult your owner’s manual.

How to Disassemble Glock 43?

Q: What tools do I need to disassemble my Glock 43?

A: You will need the following tools to disassemble your Glock 43:

• A Glock Armorer’s Tool
• A punch
• A small screwdriver

Q: How do I disassemble my Glock 43?

A: To disassemble your Glock 43, follow these steps:

1. Remove the magazine from the gun.
2. Depress the slide lock lever and pull the slide back until it is in the locked position.
3. Insert the Glock Armorer’s Tool into the hole in the rear of the slide and rotate it clockwise until the slide stop pin is released.
4. Remove the slide stop pin and slide it out of the gun.
5. Pull the slide forward off of the frame.
6. Remove the recoil spring assembly from the slide.
7. Remove the barrel from the slide.

Q: How do I reassemble my Glock 43?

A: To reassemble your Glock 43, follow these steps:

1. Insert the barrel into the slide.
2. Insert the recoil spring assembly into the slide.
3. Slide the slide forward onto the frame.
4. Insert the slide stop pin and rotate it counterclockwise until it is locked in place.
5. Depress the slide lock lever and release the slide.
6. Insert the magazine into the gun.

Q: What are some common problems with Glock 43s?

A: Some common problems with Glock 43s include:

• Failure to eject
• Failure to feed
• Trigger malfunctions

Q: How can I fix these problems?

A: If you are experiencing any of these problems, you should take your Glock 43 to a qualified gunsmith for repair.

Q: Where can I find more information about Glock 43s?

A: You can find more information about Glock 43s on the following websites:

• [Glock’s website](https://www.glock.com/en/products/glock-43)
• [The Glock Forum](https://www.glockforum.com/)
• [The Glock Owners Group](https://www.glockowners.com/)

  Congratulations! You have successfully disassembled your Glock 43. By following these steps, you can safely and easily clean, maintain, and repair your firearm. Remember to always keep your firearm unloaded and pointed in a safe direction when cleaning or performing any maintenance.

Here are some key takeaways from this article:

• Always wear eye protection when disassembling your Glock 43.
• Be careful not to lose any small parts.
• Reassemble your Glock 43 in the reverse order of disassembly.
• Practice disassembling and reassembling your Glock 43 regularly to become familiar with the process.

By following these tips, you can keep your Glock 43 in top condition and ensure its safe operation.