How To Disassemble A Remington Model 700?

The Remington Model 700 is a popular bolt-action rifle that has been in production for over 60 years. It is known for its accuracy, reliability, and affordability. If you own a Remington Model 700, it is important to know how to disassemble it properly for cleaning and maintenance. In this article, we will walk you through the process of disassembling a Remington Model 700 step-by-step. We will also provide tips on how to clean and maintain your rifle properly. So whether you are a new owner or a seasoned shooter, read on to learn how to disassemble a Remington Model 700!

Step	Instructions	Image
1	Remove the bolt from the rifle.
2	Remove the trigger guard.
3	Remove the action screws.
4	Remove the action from the stock.

The Remington Model 700 is a popular bolt-action rifle that is used for hunting, target shooting, and self-defense. It is a well-made and reliable rifle, but it is important to know how to disassemble it properly for cleaning and maintenance. This guide will walk you through the steps of disassembling a Remington Model 700 in a safe and efficient manner.

Safety Precautions

Before you begin disassembling your Remington Model 700, it is important to take some safety precautions to protect yourself and your rifle.

• Wear eye protection and hearing protection. When working with firearms, it is important to wear eye protection and hearing protection to protect yourself from potential injuries.
• Keep the rifle pointed in a safe direction. Always keep the rifle pointed in a safe direction, even when it is disassembled.
• Remove the magazine and verify that the chamber is empty. Before you begin disassembling the rifle, make sure that the magazine is removed and the chamber is empty.
• Disassemble the rifle in a well-lit area. Make sure that you have plenty of light so that you can see what you are doing.

Disassembling the Action

To disassemble the action of a Remington Model 700, you will need to remove the bolt, the trigger assembly, the bolt shroud, and the firing pin.

1. Removing the bolt

To remove the bolt, you will need to:

1. Open the bolt by pulling back on the bolt handle and rotating the bolt sleeve clockwise.
2. Press down on the bolt release button and pull the bolt out of the receiver.

2. Removing the trigger assembly

To remove the trigger assembly, you will need to:

1. Remove the two screws that secure the trigger assembly to the receiver.
2. Lift up on the trigger assembly and remove it from the receiver.

3. Removing the bolt shroud

To remove the bolt shroud, you will need to:

1. Remove the two screws that secure the bolt shroud to the receiver.
2. Lift up on the bolt shroud and remove it from the receiver.

4. Removing the firing pin

To remove the firing pin, you will need to:

1. Remove the firing pin retaining pin.
2. Remove the firing pin from the bolt.

Reassembling the Action

To reassemble the action of a Remington Model 700, you will need to reverse the steps that you took to disassemble it.

1. Reassembling the firing pin

1. Insert the firing pin into the bolt.
2. Insert the firing pin retaining pin and secure it in place.

2. Reassembling the bolt shroud

1. Insert the bolt shroud into the receiver.
2. Secure the bolt shroud in place with the two screws.

3. Reassembling the trigger assembly

1. Insert the trigger assembly into the receiver.
2. Secure the trigger assembly in place with the two screws.

4. Reassembling the bolt

1. Insert the bolt into the receiver.
2. Close the bolt by pulling back on the bolt handle and rotating the bolt sleeve counterclockwise.

By following these steps, you can safely and efficiently disassemble a Remington Model 700 for cleaning and maintenance. For more information on disassembling a Remington Model 700, you can consult the owner’s manual or a qualified gunsmith.

Disassembling the Action

To disassemble the action of a Remington Model 700, you will need the following tools:

• A 3/8-inch Allen wrench
• A 1/4-inch Allen wrench
• A small screwdriver

1. Remove the bolt from the rifle.
2. Remove the magazine from the rifle.
3. Turn the safety to the “safe” position.
4. Remove the bolt shroud from the rifle by unscrewing the two 3/8-inch Allen screws that hold it in place.
5. Remove the firing pin assembly from the rifle by unscrewing the 1/4-inch Allen screw that holds it in place.
6. Remove the extractor from the rifle by unscrewing the small screw that holds it in place.
7. Remove the bolt from the rifle by pulling it straight out of the action.

Disassembling the Trigger Assembly

To disassemble the trigger assembly of a Remington Model 700, you will need the following tools:

• A small screwdriver
• A 1/8-inch Allen wrench

1. Remove the bolt from the rifle.
2. Remove the magazine from the rifle.
3. Turn the safety to the “safe” position.
4. Remove the trigger guard from the rifle by unscrewing the two 1/8-inch Allen screws that hold it in place.
5. Remove the trigger assembly from the rifle by pulling it straight out of the action.

Disassembling the Stock

To disassemble the stock of a Remington Model 700, you will need the following tools:

• A small screwdriver
• A 1/4-inch Allen wrench

1. Remove the stock from the rifle.
2. Remove the recoil pad from the stock.
3. Remove the action screws from the stock.
4. Remove the stock from the rifle.

Reassembling the Rifle

To reassemble the rifle, you will need to follow the steps in reverse order of disassembly.

1. Reassemble the stock to the rifle.
2. Reattach the action screws to the stock.
3. Reattach the recoil pad to the stock.
4. Reattach the stock to the rifle.
5. Reassemble the trigger assembly to the rifle.
6. Reattach the trigger guard to the rifle.
7. Reinsert the bolt into the rifle.
8. Reinsert the magazine into the rifle.

Disassembling and reassembling a Remington Model 700 is a relatively simple task that can be accomplished with a few basic tools. By following the steps in this guide, you can safely and effectively disassemble and reassemble your rifle.

How do I disassemble a Remington Model 700?

1. Remove the bolt from the rifle by pulling back on the bolt handle and disengaging the bolt from the receiver.
2. Remove the magazine from the rifle by pressing the magazine release button and pulling the magazine out of the rifle.
3. Remove the trigger guard by depressing the two trigger guard pins and sliding the trigger guard off of the rifle.
4. Remove the bolt shroud by depressing the two bolt shroud pins and sliding the bolt shroud off of the rifle.
5. Remove the bolt body by depressing the two bolt body pins and sliding the bolt body out of the rifle.
6. Remove the firing pin assembly by depressing the firing pin spring plunger and removing the firing pin assembly from the rifle.
7. Remove the extractor by depressing the extractor spring plunger and removing the extractor from the rifle.
8. Remove the ejector by depressing the ejector spring plunger and removing the ejector from the rifle.
9. Reassemble the rifle by reversing the disassembly steps.

What tools do I need to disassemble a Remington Model 700?

You will need the following tools to disassemble a Remington Model 700:

• A punch
• A hammer
• A screwdriver
• A pair of pliers

What is the difference between a Remington Model 700 and a Remington Model 700 SPS?

The Remington Model 700 and the Remington Model 700 SPS are two very similar rifles, but there are a few key differences between them. The SPS model has a synthetic stock, while the standard model has a wood stock. The SPS model also has a shorter barrel than the standard model.

Can I use a Remington Model 700 scope on a Remington Model 700 SPS?

Yes, you can use a Remington Model 700 scope on a Remington Model 700 SPS. However, you may need to purchase a different mount for the scope, as the SPS model has a different receiver than the standard model.

What is the best way to clean a Remington Model 700?

The best way to clean a Remington Model 700 is to use a solvent and a brush to remove any dirt or debris from the rifle. You should also lubricate the rifle with a light oil to prevent rust.

How often should I clean my Remington Model 700?

You should clean your Remington Model 700 after each use, or more often if the rifle is used in dirty or dusty conditions.

In this blog post, we have discussed how to disassemble a Remington Model 700 rifle. We started by discussing the tools and materials you will need. Then, we walked you through the step-by-step process of disassembling the rifle. Finally, we provided some tips for reassembling the rifle.

We hope that this blog post has been helpful. If you have any questions, please feel free to leave a comment below.