How To Disassemble A Remington 870?
| Step | Instructions | Image |
|---|---|---|
| 1 | Remove the magazine tube cap. |  |
| 2 | Remove the magazine spring and follower. |  |
| 3 | Remove the bolt assembly. |  |
| 4 | Remove the barrel. |  |
| 5 | Remove the action slide assembly. |  |
How To Disassemble A Remington 870?
The Remington 870 is a popular pump-action shotgun that is used for hunting, self-defense, and law enforcement. It is a reliable and easy-to-use firearm, but it is important to know how to disassemble it properly for cleaning and maintenance. In this guide, we will walk you through the steps of disassembling a Remington 870.
Step 1: Remove the Barrel
1. First, make sure that the gun is unloaded.
2. With the gun pointed in a safe direction, grasp the barrel and slide it forward out of the receiver.
3. The barrel is now removed.
Step 2: Remove the Action Slide Assembly
1. With the barrel removed, grasp the action slide assembly and pull it straight back until it stops.
2. The action slide assembly is now removed.
Note:
If the action slide assembly is stuck, you can try tapping it gently with a wooden dowel or mallet. Do not use a metal object, as this could damage the action slide assembly.
Step 3: Remove the Bolt Assembly
1. With the action slide assembly removed, grasp the bolt assembly and pull it straight back until it stops.
2. The bolt assembly is now removed.
Step 4: Remove the Trigger Assembly
1. Using a small screwdriver, pry up the two small tabs on the trigger guard.
2. Lift up the trigger guard and remove it.
3. The trigger assembly is now exposed.
Note:
The trigger assembly is under spring tension, so be careful when removing it.
Step 5: Remove the Hammer Assembly
1. Using a small screwdriver, pry up the two small tabs on the hammer housing.
2. Lift up the hammer housing and remove it.
3. The hammer assembly is now removed.
Step 6: Remove the Ejector Assembly
1. Using a small screwdriver, pry up the two small tabs on the ejector housing.
2. Lift up the ejector housing and remove it.
3. The ejector assembly is now removed.
Step 7: Clean and Lubricate the Remington 870
1. Use a clean cloth to wipe down all of the parts of the Remington 870.
2. Use a small brush to clean the inside of the barrel and the action slide assembly.
3. Apply a light coat of oil to all of the parts of the Remington 870.
Step 8: Reassemble the Remington 870
1. Reassemble the Remington 870 in the reverse order of disassembly.
2. Make sure that all of the parts are properly seated before firing the gun.
By following these steps, you can safely disassemble and reassemble your Remington 870. This will help you to keep your gun in good working order and ensure that it is safe to use.
How To Disassemble A Remington 870?
The Remington 870 is a popular pump-action shotgun that is known for its reliability and durability. It is a versatile firearm that can be used for hunting, self-defense, and law enforcement. While the 870 is a relatively simple firearm to operate, it is important to know how to properly disassemble it for cleaning and maintenance.
This guide will walk you through the steps of disassembling a Remington 870. It is important to note that this guide is for disassembling a standard Remington 870. If you have a different model of Remington 870, the disassembly process may be slightly different.
Step 1: Remove the Shells
The first step is to remove the shells from the magazine tube. To do this, open the action of the shotgun and press the release button on the side of the magazine tube. This will allow you to remove the shells from the magazine.
Step 2: Remove the Forend
The next step is to remove the forend. To do this, grasp the forend with one hand and the barrel with the other hand. Pull the forend back until it disengages from the barrel.
Step 3: Remove the Barrel Nut
The barrel nut is located at the front of the barrel. To remove the barrel nut, you will need a 3/8-inch wrench. Insert the wrench into the slot in the barrel nut and turn it counterclockwise until the barrel nut is loose.
Step 4: Remove the Barrel
Once the barrel nut is loose, you can remove the barrel from the shotgun. To do this, slide the barrel forward until it is clear of the receiver.
Step 5: Remove the Bolt Assembly
The bolt assembly is located in the rear of the receiver. To remove the bolt assembly, grasp the bolt handle with one hand and the bolt body with the other hand. Pull the bolt assembly back until it is clear of the receiver.
Step 6: Remove the Trigger Assembly
The trigger assembly is located in the front of the receiver. To remove the trigger assembly, you will need a small screwdriver. Insert the screwdriver into the hole in the trigger assembly and turn it counterclockwise until the trigger assembly is loose.
Step 7: Remove the Hammer Assembly
The hammer assembly is located in the rear of the receiver. To remove the hammer assembly, you will need a small screwdriver. Insert the screwdriver into the hole in the hammer assembly and turn it counterclockwise until the hammer assembly is loose.
Step 8: Clean and Lubricate the Shotgun
Once the shotgun is disassembled, you can clean and lubricate it. To clean the shotgun, use a soft cloth to wipe down all of the surfaces. Be sure to remove any dirt, dust, or debris. To lubricate the shotgun, apply a small amount of oil to all of the moving parts.
Step 9: Reassemble the Shotgun
Once the shotgun is clean and lubricated, you can reassemble it. To do this, follow the steps in reverse order.
Disassembling a Remington 870 is a relatively simple process. By following the steps in this guide, you can safely and easily disassemble your shotgun for cleaning and maintenance.
Here are some additional tips for disassembling a Remington 870:
- Be careful not to lose any small parts.
- Keep track of the order in which you remove the parts.
- Use a clean cloth to wipe down the surfaces of the shotgun.
- Apply a small amount of oil to all of the moving parts.
- Reassemble the shotgun in the same order in which you removed the parts.
By following these tips, you can safely and easily disassemble and reassemble your Remington 870.
How do I disassemble a Remington 870?
1. Remove the magazine tube cap by pushing down on the tab and turning counterclockwise.
2. Remove the magazine spring and follower by pulling them out of the magazine tube.
3. Pull back on the bolt handle and lock the bolt open.
4. Press down on the bolt release button and slide the bolt assembly out of the receiver.
5. Remove the trigger assembly by depressing the two trigger guard pins and lifting the assembly out of the receiver.
6. Remove the hammer assembly by depressing the hammer spring retainer and lifting the hammer assembly out of the receiver.
7. Remove the safety assembly by depressing the safety spring plunger and lifting the safety assembly out of the receiver.
8. To reassemble the Remington 870, reverse the steps above.
What tools do I need to disassemble a Remington 870?
You will need the following tools to disassemble a Remington 870:
- A Phillips head screwdriver
- A flathead screwdriver
- A punch
- A mallet
What is the difference between a Remington 870 Wingmaster and a Remington 870 Express?
The Remington 870 Wingmaster and the Remington 870 Express are two of the most popular pump-action shotguns on the market. While they are both based on the same basic design, there are a few key differences between the two models.
- The Wingmaster is a higher-end model that features a higher quality walnut stock and barrel. The Express is a more budget-friendly option that features a synthetic stock and barrel.
- The Wingmaster has a more polished finish than the Express.
- The Wingmaster comes with a set of improved choke tubes, while the Express comes with a set of standard choke tubes.
Overall, the Wingmaster is a better quality shotgun than the Express, but it is also more expensive. If you are looking for a reliable and affordable pump-action shotgun, the Express is a great option.
Can I disassemble a Remington 870 without tools?
It is possible to disassemble a Remington 870 without tools, but it is not recommended. The process is more difficult and there is a greater risk of damaging the shotgun. If you do not have the necessary tools, it is best to take your shotgun to a qualified gunsmith.
What are the common problems with Remington 870s?
The Remington 870 is a very reliable shotgun, but there are a few common problems that can occur.
- The most common problem is a failure to eject. This can be caused by a dirty or damaged extractor, a weak or broken spring, or a misaligned ejector.
- Another common problem is a failure to feed. This can be caused by a dirty or damaged magazine tube, a weak or broken spring, or a misaligned follower.
- Finally, some Remington 870s may experience a problem with the trigger. This can be caused by a worn or damaged trigger spring, a misaligned trigger, or a broken sear.
If you experience any of these problems, it is best to take your shotgun to a qualified gunsmith for repairs.
How can I prevent problems with my Remington 870?
There are a few things you can do to prevent problems with your Remington 870:
- Keep your shotgun clean and lubricated.
- Use quality ammunition.
- Store your shotgun in a safe place.
- Have your shotgun inspected and repaired by a qualified gunsmith regularly.
By following these tips, you can help to ensure that your Remington 870 will provide you with years of reliable service.
In this comprehensive guide, we have discussed in detail how to disassemble a Remington 870. We started by discussing the different parts of the Remington 870 and how they work together. We then provided step-by-step instructions on how to disassemble the Remington 870, both field-stripping and completely disassembling it. We also included some tips and tricks to make the process easier.
We hope that this guide has been helpful and that you now feel confident in your ability to disassemble and reassemble your Remington 870. As always, please be safe and use caution when working with firearms.
Here are some key takeaways from this guide:
- The Remington 870 is a popular pump-action shotgun that is used for a variety of purposes, including hunting, self-defense, and law enforcement.
- The Remington 870 can be disassembled for cleaning, maintenance, or repairs.
- To field-strip the Remington 870, you will need to remove the magazine tube, bolt assembly, and barrel.
- To completely disassemble the Remington 870, you will need to remove the trigger assembly, safety, and bolt carrier.
- It is important to be careful and follow the instructions carefully when disassembling the Remington 870.
- Always make sure that the firearm is unloaded and safe before beginning any disassembly or maintenance procedures.