How to Disassemble a Mossberg 500 for Cleaning and Maintenance

How to Disassemble a Mossberg 500

The Mossberg 500 is a popular shotgun for home defense, hunting, and sporting clays. It’s a reliable and durable gun that’s easy to use and maintain. However, if you ever need to clean or repair your Mossberg 500, it’s important to know how to disassemble it properly.

In this article, we’ll walk you through the steps of disassembling a Mossberg 500. We’ll cover everything from removing the magazine tube to taking the bolt out of the receiver. We’ll also provide tips on how to reassemble your gun safely and correctly.

So if you’re ready to learn how to disassemble a Mossberg 500, read on!

Step	Instructions	Image
1	Remove the magazine.
2	Depress the action release button and open the action.
3	Remove the bolt assembly.
4	Remove the barrel.

How to Disassemble a Mossberg 500?

The Mossberg 500 is a popular shotgun that is known for its reliability and affordability. It is a good choice for both hunting and home defense. However, like any firearm, it is important to know how to properly disassemble it for cleaning and maintenance.

This guide will walk you through the process of disassembling a Mossberg 500 in a few simple steps.

Step 1: Remove the Barrel

1. First, make sure that the shotgun is unloaded.
2. With the shotgun pointed in a safe direction, grasp the barrel near the front and pull it back until it disengages from the receiver.
3. The barrel should now be free to remove.

Step 2: Remove the Action Assembly

1. Next, you will need to remove the action assembly from the receiver. To do this, first depress the action release button located on the bottom of the receiver.
2. Once the action release button is depressed, you can pull the bolt assembly forward and out of the receiver.
3. The action assembly should now be free to remove.

Step 3: Clean and Lubricate the Shotgun

Now that the shotgun is disassembled, you can clean and lubricate it. To do this, you will need a cleaning kit and some gun oil.

1. First, use a cleaning rod and some solvent to clean the barrel. Be sure to clean the inside of the barrel as well as the outside.
2. Next, use a brush to clean the action assembly. Be sure to clean all of the moving parts.
3. Finally, apply a light coat of gun oil to all of the metal surfaces of the shotgun.

Step 4: Reassemble the Shotgun

Once the shotgun is clean and lubricated, you can reassemble it. To do this, simply reverse the steps that you took to disassemble it.

1. First, insert the action assembly into the receiver.
2. Then, push the bolt assembly forward until it engages with the receiver.
3. Finally, release the action release button and the shotgun should be reassembled.

Disassembling and reassembling a Mossberg 500 is a relatively simple process. By following these steps, you can safely and effectively maintain your shotgun.

Here are some additional tips for disassembling and reassembling a Mossberg 500:

• Be careful not to lose any small parts.
• Keep the shotgun pointed in a safe direction at all times.
• If you are unsure about how to disassemble or reassemble the shotgun, consult the owner’s manual.

By following these tips, you can safely and effectively maintain your Mossberg 500 and keep it in good working order.

Step 3: Remove the Trigger Assembly

1. With the bolt assembly removed, you can now remove the trigger assembly.
2. To do this, first disconnect the safety from the trigger group.
3. There is a small pin that holds the safety in place.
4. Use a small punch or screwdriver to push this pin out.
5. Once the pin is out, the safety will come loose and you can remove it.
6. Now you can remove the trigger group from the receiver.
7. There are two small screws that hold the trigger group in place.
8. Use a small screwdriver to remove these screws.
9. Once the screws are removed, the trigger group will come loose and you can remove it.

Step 4: Remove the Bolt Assembly

1. To remove the bolt assembly, first remove the bolt from the barrel.
2. There is a small button on the side of the bolt that you need to press.
3. Once you press this button, the bolt will come loose and you can remove it.
4. Now you can remove the bolt assembly from the receiver.
5. There is a small pin that holds the bolt assembly in place.
6. Use a small punch or screwdriver to push this pin out.
7. Once the pin is out, the bolt assembly will come loose and you can remove it.

Now that you have disassembled your Mossberg 500, you can clean and lubricate it.

To reassemble your Mossberg 500, simply reverse the steps above.

Here are some additional tips for disassembling and assembling your Mossberg 500:

• Be careful not to lose any small parts.
• Keep track of the order in which you remove the parts.
• When reassembling the gun, make sure that all of the parts are properly aligned.
• Tighten the screws and bolts securely, but do not overtighten them.

By following these tips, you can safely and easily disassemble and reassemble your Mossberg 500.

Q: How do I disassemble a Mossberg 500?

A: To disassemble a Mossberg 500, follow these steps:

1. Remove the magazine.
2. Lock the bolt to the rear.
3. Press the release button on the safety/tang.
4. Move the safety/tang to the “fire” position.
5. Pull the bolt handle to the rear and hold it there.
6. While holding the bolt handle to the rear, use a small screwdriver or punch to depress the bolt release button.
7. The bolt will now come out of the receiver.
8. Remove the forend by pulling it forward and off of the barrel.
9. The shotgun is now disassembled.

Q: What tools do I need to disassemble a Mossberg 500?

A: You will need a small screwdriver or punch to depress the bolt release button.

Q: How do I reassemble a Mossberg 500?

A: To reassemble a Mossberg 500, follow these steps:

1. Insert the bolt into the receiver.
2. Push the bolt release button to lock the bolt in place.
3. Move the safety/tang to the “safe” position.
4. Slide the forend onto the barrel and lock it in place.
5. Insert the magazine.

The shotgun is now reassembled.

Q: What are the safety precautions I should take when disassembling a Mossberg 500?

A: When disassembling a Mossberg 500, you should always take the following safety precautions:

• Keep the muzzle pointed in a safe direction at all times.
• Remove the magazine and ensure that there is no ammunition in the chamber.
• Lock the bolt to the rear.
• Depress the bolt release button and remove the bolt from the receiver.
• Inspect the shotgun for any damage or defects.
• Reassemble the shotgun and test fire it to make sure it is functioning properly.

Q: What are the common problems that can occur when disassembling a Mossberg 500?

A: The most common problems that can occur when disassembling a Mossberg 500 are:

• Failure to depress the bolt release button.
• Failure to lock the bolt to the rear.
• Failure to remove the bolt from the receiver.
• Failure to reassemble the shotgun correctly.

If you experience any of these problems, you should consult a qualified gunsmith for assistance.

Q: Where can I find more information on disassembling a Mossberg 500?

A: You can find more information on disassembling a Mossberg 500 in the following places:

• The Mossberg 500 owner’s manual
• Online forums and websites
• Gunsmiths

Q: I am not comfortable disassembling my Mossberg 500. Is there someone who can do it for me?

A: Yes, there are qualified gunsmiths who can disassemble and reassemble your Mossberg 500. You can find a gunsmith in your area by doing a search online or by asking your local gun store.

In this comprehensive guide, we have discussed how to disassemble a Mossberg 500 shotgun in detail. We started by discussing the different parts of the shotgun and how they function. We then provided step-by-step instructions on how to disassemble the shotgun, both field-stripping and completely disassembling it. Finally, we offered some tips and best practices for disassembling and reassembling your shotgun safely.

We hope that this guide has been helpful and that you now feel confident in your ability to disassemble and reassemble your Mossberg 500 shotgun. As always, please be sure to follow all safety precautions when handling firearms.