How To Decock Tenpoint Crossbow?

ByBuffalo Rifles Blog

How to Decock a TenPoint Crossbow

Crossbows are powerful weapons that can be dangerous if not handled properly. Decocking a crossbow is the process of safely lowering the drawstring so that it cannot fire. It is important to know how to decock your crossbow before you use it, so that you can do so safely and prevent any accidents.

In this article, we will discuss how to decock a TenPoint crossbow. We will provide step-by-step instructions and tips for safely decocking your crossbow. We will also discuss some of the common mistakes that people make when decocking their crossbows, and how to avoid them.

By following these instructions, you can safely decock your TenPoint crossbow and prevent any accidents.

Step Action Explanation
1 Uncock the crossbow by pulling back on the cocking handle until it stops. This will release the tension on the crossbow’s bowstring.
2 Press down on the safety button. This will disable the crossbow’s trigger.
3 Lower the crossbow’s bow arm. This will return the crossbow to its resting position.

How To Decock Tenpoint Crossbow?

Safety Precautions

Before decocking your Tenpoint crossbow, make sure that the safety is engaged and the crossbow is unloaded. To do this, follow these steps:

1. Slide the safety switch to the “safe” position.
2. Open the crossbow’s loading port and remove the bolt.
3. Verify that there is no arrow in the crossbow’s barrel.

Always point the crossbow in a safe direction, even when it is unloaded. This means pointing the crossbow downrange, away from people and animals.

Wear eye protection when decocking your crossbow. This will protect your eyes from any debris that may be released during the decocking process.

Decocking the Crossbow

To decock the crossbow, follow these steps:

1. Uncock the safety.
2. Pull back on the trigger until the crossbow is fully cocked.
3. Hold the trigger back and press the decocking button.
4. Release the trigger.

The crossbow will now be decocked and safe to handle.

Decocking your Tenpoint crossbow is a simple process that can be completed in a few steps. By following the safety precautions outlined in this guide, you can safely decock your crossbow and prevent any accidents.

Here are some additional tips for decocking your Tenpoint crossbow:

  • If you are not comfortable decocking your crossbow, take it to a qualified gunsmith or archery shop.
  • Never attempt to decock your crossbow if it is loaded.
  • Be careful not to drop the crossbow while decocking it.
  • Store your crossbow in a safe place when it is not in use.

By following these tips, you can safely enjoy your Tenpoint crossbow for years to come.

How To Decock Tenpoint Crossbow?

1. Cocking the Crossbow

Before you can decock a Tenpoint crossbow, you must first cock it. To do this, follow these steps:

1. Hold the crossbow in your dominant hand with the stock against your shoulder.
2. Use your non-dominant hand to grasp the cocking handle and pull it back until it stops.
3. The crossbow is now cocked and ready to fire.

2. Decocking the Crossbow

To decock a Tenpoint crossbow, follow these steps:

1. Hold the crossbow in your dominant hand with the stock against your shoulder.
2. Use your non-dominant hand to grasp the safety lever and slide it to the “safe” position.
3. The crossbow is now decocked and safe to handle.

3. Checking the Crossbow

After decocking the crossbow, check to make sure that the safety is engaged and the crossbow is unloaded. To do this, follow these steps:

1. Look at the safety lever to make sure that it is in the “safe” position.
2. Look at the crossbow’s magazine to make sure that it is empty.
3. Make sure that the crossbow is pointed in a safe direction.

4. Storage

Store your Tenpoint crossbow in a safe place, unloaded and with the safety engaged. To do this, follow these steps:

1. Place the crossbow in a gun safe or other secure location.
2. Make sure that the crossbow is unloaded and the safety is engaged.
3. Close the door of the gun safe or other secure location.

By following these steps, you can safely decock and store your Tenpoint crossbow.

How do I decock my TenPoint crossbow?

1. Uncock the crossbow by pulling back on the cocking handle until it stops.
2. Press the safety button down and hold it while you push the cocking handle forward until it locks into place.
3. Release the safety button.

What happens if I don’t decock my crossbow?

If you do not decock your crossbow, it could fire accidentally. This could be dangerous, as it could injure you or someone else.

How often should I decock my crossbow?

You should decock your crossbow every time you are finished using it. This will help to prevent accidental firings.

**What if I can’t decock my crossbow?

If you are unable to decock your crossbow, you should take it to a qualified gunsmith for assistance. Do not attempt to decock the crossbow yourself, as you could injure yourself.

decocking a Tenpoint crossbow is a simple process that can be completed in a few steps. By following the steps outlined in this guide, you can safely and effectively decock your crossbow and prevent any unnecessary accidents.

Here are the key takeaways from this guide:

  • Always wear eye protection when decocking a crossbow.
  • Never point the crossbow at anything you do not intend to shoot.
  • Decock the crossbow by pulling back on the trigger until it clicks, then release it.
  • Repeat this process until the crossbow is decocked.

By following these simple steps, you can safely and effectively decock your Tenpoint crossbow.

Similar Posts