How To Clean Glock 43?
How to Clean Glock 43
The Glock 43 is a popular concealed carry handgun, and it’s important to keep it clean and well-maintained to ensure its reliability. Cleaning your Glock 43 is a relatively simple process, but it’s important to do it correctly to avoid damaging the gun.
In this article, we’ll walk you through the steps of cleaning your Glock 43, from disassembling the gun to reassembling it. We’ll also provide some tips on how to keep your Glock 43 clean and functioning properly.
So whether you’re a new Glock owner or you’re just looking for a refresher on how to clean your gun, read on for all the information you need.
| Step | Instructions | Image |
|---|---|---|
| 1 | Remove the magazine and ensure the pistol is unloaded. |  |
| 2 | Disassemble the pistol by removing the slide and barrel. |  |
| 3 | Clean the exterior of the slide and barrel with a soft cloth and gun oil. |  |
| 4 | Clean the interior of the slide and barrel with a cleaning rod and solvent. |  |
| 5 | Reassemble the pistol and dry it with a soft cloth. |  |
The Glock 43 is a popular subcompact pistol that is known for its reliability and ease of use. However, like any other firearm, it is important to clean and maintain your Glock 43 regularly to ensure that it continues to function properly.
In this guide, we will walk you through the process of cleaning and maintaining your Glock 43. We will cover everything from disassembly and assembly to cleaning and lubrication. By following these steps, you can help to keep your Glock 43 in top condition for years to come.
Disassembly and Assembly
The first step in cleaning your Glock 43 is to disassemble it. This is a relatively simple process, but it is important to follow the steps carefully to avoid damaging your firearm.
To disassemble your Glock 43, follow these steps:
1. Remove the magazine.
2. Lock the slide back.
3. Depress the trigger.
4. Remove the slide stop lever.
5. Remove the slide.
6. Remove the barrel.
7. Remove the recoil spring assembly.
8. Reassemble the Glock 43.
Step 1: Remove the magazine
The first step is to remove the magazine from the Glock 43. To do this, simply press the magazine release button located on the left side of the frame. The magazine will then pop out of the gun.
Step 2: Lock the slide back
The next step is to lock the slide back. To do this, grasp the slide with your dominant hand and pull it back until it stops. The slide should be locked back with the ejection port facing up.
Step 3: Depress the trigger
The third step is to depress the trigger. This will release the striker and allow the slide to be removed.
Step 4: Remove the slide stop lever
The fourth step is to remove the slide stop lever. To do this, use a small flathead screwdriver to pry the slide stop lever up and out of the frame.
Step 5: Remove the slide
The fifth step is to remove the slide. To do this, grasp the slide with your dominant hand and pull it forward and off of the frame.
Step 6: Remove the barrel
The sixth step is to remove the barrel. To do this, grasp the barrel with your non-dominant hand and pull it out of the slide.
Step 7: Remove the recoil spring assembly
The seventh step is to remove the recoil spring assembly. To do this, grasp the recoil spring assembly with your non-dominant hand and push it down and out of the slide.
Step 8: Reassemble the Glock 43
To reassemble the Glock 43, simply reverse the steps that you took to disassemble it. Make sure that all of the parts are properly aligned before you reinsert them into the gun.
Cleaning and Lubrication
Once you have disassembled your Glock 43, you can begin the cleaning process. The following steps will help you to clean and lubricate your Glock 43 properly:
1. Use a cleaning brush to remove any dirt or debris from the inside of the barrel.
2. Use a solvent to clean the exterior of the gun.
3. Apply a light coat of lubricant to all of the moving parts.
4. Reassemble the Glock 43.
By following these steps, you can help to keep your Glock 43 in top condition for years to come. By regularly cleaning and lubricating your gun, you can help to prevent malfunctions and ensure that it is always ready to use when you need it.
Additional Tips
Here are a few additional tips for cleaning and maintaining your Glock 43:
- Use a soft cloth to clean the exterior of the gun. Avoid using abrasive cleaners or materials, as they can damage the finish.
- Do not use too much lubricant. A light coat is all that is needed to keep the gun moving smoothly.
- Be careful not to over-lube the gun, as this can attract dirt and debris.
- Store your Glock 43 in a clean, dry place.
- Avoid exposing your Glock 43 to extreme heat or cold.
- If your Glock 43 is exposed to water, be sure to dry it thoroughly before storing it.
By following these tips, you can help to keep your Glock 43 in top condition for years to come.
3. Cleaning the Slide
The slide is the part of the Glock 43 that moves back and forth when the gun is fired. It is important to keep the slide clean to ensure that it functions properly.
To clean the slide, you will need:
- A cleaning cloth or brush
- A solvent, such as gun cleaner or rubbing alcohol
- A cleaning rod
- A bore brush
- A lubricant
Step 1: Remove the slide from the frame.
1. Press the slide release button and pull the slide back until it stops.
2. Grasp the slide firmly with one hand and the frame with the other.
3. While pulling the slide back, rotate it down and off of the frame.
Step 2: Clean the exterior of the slide with a cloth or brush.
1. Use a clean cloth or brush to wipe down the exterior of the slide.
2. Pay attention to any areas that are particularly dirty, such as the ejection port and the rails.
Step 3: Clean the interior of the slide with a cleaning rod and solvent.
1. Insert the cleaning rod through the barrel and into the slide.
2. Move the cleaning rod back and forth to loosen any dirt or debris.
3. Use a bore brush to clean the inside of the barrel.
4. Apply a small amount of solvent to a cleaning cloth and wipe down the inside of the slide.
Step 4: Lubricate the slide with a light coat of oil.
1. Apply a small amount of oil to a clean cloth.
2. Wipe down the exterior of the slide with the oil.
3. Apply a small amount of oil to the rails of the slide.
4. Cleaning the Barrel
The barrel is the part of the Glock 43 that the bullet travels through when the gun is fired. It is important to keep the barrel clean to ensure that the gun functions properly and to prevent corrosion.
To clean the barrel, you will need:
- A cleaning rod
- A bore brush
- A solvent, such as gun cleaner or rubbing alcohol
- A lubricant
Step 1: Remove the barrel from the slide.
1. Press the slide release button and pull the slide back until it stops.
2. Grasp the slide firmly with one hand and the barrel with the other.
3. While pulling the slide back, rotate it down and off of the barrel.
Step 2: Clean the exterior of the barrel with a cleaning rod and solvent.
1. Insert the cleaning rod through the barrel and into the slide.
2. Move the cleaning rod back and forth to loosen any dirt or debris.
3. Use a bore brush to clean the inside of the barrel.
4. Apply a small amount of solvent to a cleaning cloth and wipe down the inside of the barrel.
Step 3: Lubricate the barrel with a light coat of oil.
1. Apply a small amount of oil to a clean cloth.
2. Wipe down the exterior of the barrel with the oil.
3. Apply a small amount of oil to the inside of the barrel.
By following these steps, you can keep your Glock 43 clean and functioning properly. A clean gun is a safe gun, so be sure to clean your Glock 43 regularly.
Here are some additional tips for cleaning your Glock 43:
- Use a soft cloth or brush to clean the gun. Do not use anything abrasive, as this could damage the finish.
- Be careful not to get any solvent or oil in the trigger or firing pin mechanism.
- Store your Glock 43 in a clean, dry place.
- If you are not sure how to clean your Glock 43, take it to a qualified gunsmith.
How often should I clean my Glock 43?
It is recommended to clean your Glock 43 after every 500 rounds fired. However, you may need to clean it more often if it is used in dirty or dusty conditions.
What do I need to clean my Glock 43?
You will need the following items to clean your Glock 43:
- A cleaning kit specifically designed for Glock pistols
- Gun oil
- A rag or cloth
- A toothbrush
- A small brush
- A boresnake
How do I clean the exterior of my Glock 43?
1. Remove the magazine and the slide from the frame.
2. Use a rag or cloth to wipe down the exterior of the frame and slide.
3. Use a toothbrush to clean the inside of the trigger guard and the serrations on the slide.
4. Use a small brush to clean the dust and dirt from the barrel lugs.
5. Apply a small amount of gun oil to the exterior of the frame and slide.
How do I clean the interior of my Glock 43?
1. Remove the barrel from the slide.
2. Use a boresnake to clean the inside of the barrel.
3. Use a cleaning rod and a cleaning brush to clean the inside of the slide.
4. Apply a small amount of gun oil to the inside of the barrel and slide.
How do I lubricate my Glock 43?
1. Apply a small amount of gun oil to the following areas:
- The rails of the slide
- The inside of the barrel
- The contact points between the slide and the frame
- The trigger assembly
2. Wipe away any excess oil with a rag or cloth.
What are some common problems with Glock 43s?
Some common problems with Glock 43s include:
- Failure to eject
- Failure to feed
- Trigger malfunctions
If you are experiencing any of these problems, it is important to take your Glock 43 to a qualified gunsmith for repair.
How can I prevent problems with my Glock 43?
You can prevent problems with your Glock 43 by:
- Cleaning and lubricating it regularly
- Using quality ammunition
- Storing it in a safe place
- Taking it to a qualified gunsmith for maintenance when needed
cleaning your Glock 43 is an important part of gun maintenance. By following the steps in this guide, you can keep your Glock 43 in good working order and prevent it from becoming damaged.
Here are the key takeaways:
- Use a cleaning kit designed specifically for Glock pistols.
- Clean the Glock 43 after every use, and more frequently if it is used in dirty or dusty conditions.
- Lubricate the Glock 43 after cleaning it.
- Be careful not to damage the Glock 43’s internal components when cleaning it.
By following these tips, you can keep your Glock 43 in top condition and ensure that it is always ready to use when you need it.