How To Clean Glock 26?

How to Clean Your Glock 26

The Glock 26 is a popular concealed carry weapon, and it’s important to keep it clean and well-maintained to ensure that it functions properly. Cleaning your Glock 26 is a relatively simple process, but it’s important to do it correctly to avoid damaging the gun.

In this article, we’ll walk you through the steps of cleaning your Glock 26, from disassembling the gun to reassembling it. We’ll also provide tips on how to keep your Glock 26 clean and well-maintained in the long term.

So if you’re looking for a comprehensive guide on how to clean your Glock 26, read on!

How To Clean Glock 26?

| Step | Action | Tool |
|—|—|—|
| 1 | Remove the magazine and any live rounds from the gun. | Magazine release |
| 2 | Depress the trigger and lock the slide back. | Slide release |
| 3 | Use a cleaning rod and solvent to clean the barrel. | Cleaning rod |
| 4 | Use a brush to clean the inside of the slide and frame. | Brush |
| 5 | Apply a light coat of oil to the moving parts of the gun. | Oil |
| 6 | Reassemble the gun and dry fire it a few times to distribute the oil. | |

How to Clean Glock 26?

Tools and Materials

• Glock 26 pistol
• Cleaning kit (with brushes, patches, solvent, and lubricant)
• Safety glasses
• Rags

Disassembly

1. Remove the magazine and ensure the pistol is unloaded.
2. Depress the slide lock and pull the slide back to expose the disassembly lever.
3. Flip the disassembly lever up and push the slide forward off the frame.
4. Remove the barrel and recoil spring assembly from the slide.

Cleaning the Slide

1. Soak a patch in solvent and wipe down the exterior of the slide.
2. Use a brush to clean the inside of the slide, paying attention to the areas around the barrel and the firing pin.
3. Dry the slide with a rag.

Cleaning the Barrel

1. Soak a patch in solvent and run it through the barrel.
2. Use a brush to clean the inside of the barrel, paying attention to the rifling.
3. Dry the barrel with a rag.

Cleaning the Frame

1. Soak a patch in solvent and wipe down the exterior of the frame.
2. Use a brush to clean the inside of the frame, paying attention to the trigger assembly and the magazine well.
3. Dry the frame with a rag.

Lubricating the Glock 26

1. Apply a small amount of lubricant to the slide rails.
2. Apply a small amount of lubricant to the barrel lugs.
3. Apply a small amount of lubricant to the trigger assembly.
4. Apply a small amount of lubricant to the magazine well.

Reassembly

1. Insert the barrel and recoil spring assembly into the slide.
2. Push the slide forward onto the frame until it snaps into place.
3. Flip the disassembly lever down.
4. Insert the magazine into the pistol.

Cleaning your Glock 26 regularly is important to keep it in good working order and prevent malfunctions. By following these steps, you can easily clean your Glock 26 and keep it shooting like new.

Here are some additional tips for cleaning your Glock 26:

• Clean your Glock 26 after every use, even if it was only fired a few rounds. This will help to prevent the build-up of dirt and grime, which can lead to malfunctions.
• Use a soft cloth or brush to clean the exterior of your Glock 26. Avoid using abrasive cleaners or materials, as these can damage the finish.
• Be careful not to get any solvent or lubricant into the trigger assembly or magazine well. This can cause the pistol to malfunction.
• If you are not comfortable cleaning your Glock 26 yourself, you can take it to a qualified gunsmith for cleaning and maintenance.

Disassembly

To disassemble your Glock 26, follow these steps:

1. Remove the magazine from the gun.
2. Depress the trigger and lock the slide back.
3. Press the disassembly lever down and push the slide lock up.
4. Pull the slide off the frame.
5. Remove the recoil spring assembly from the barrel.

Cleaning

To clean your Glock 26, you will need the following materials:

• A cleaning brush
• A solvent-soaked patch
• A lubricant

1. Use the cleaning brush to remove any dirt or debris from the inside of the slide.
2. Use a solvent-soaked patch to clean the inside of the barrel.
3. Apply a thin coat of lubricant to the slide, barrel, and recoil spring assembly.

Reassembly

To reassemble your Glock 26, follow these steps:

1. Insert the recoil spring assembly into the barrel.
2. Insert the barrel into the slide.
3. Move the slide forward until it is fully seated on the frame.
4. Flip the disassembly lever down and push the slide lock up.

By following these steps, you can properly clean and maintain your Glock 26 to ensure that it continues to function reliably.

How often should I clean my Glock 26?

• Glock recommends cleaning your Glock 26 after every 500 rounds fired. However, you may need to clean it more often if you shoot in dirty or dusty conditions.

What do I need to clean my Glock 26?

• You will need the following items to clean your Glock 26:
• A cleaning kit specifically designed for Glock pistols
• A bottle of gun cleaning solvent
• A bottle of gun oil
• A few rags
• A toothbrush
• A small screwdriver

How do I clean the exterior of my Glock 26?

1. Remove the magazine and the slide from the frame.
2. Use a rag dampened with gun cleaning solvent to wipe down the exterior of the frame and slide.
3. Use a toothbrush to clean the serrations on the slide.
4. Use a small screwdriver to clean the firing pin channel.
5. Reassemble the Glock 26.

How do I clean the interior of my Glock 26?

1. Remove the magazine and the slide from the frame.
2. Insert a cleaning rod through the barrel and attach a cleaning brush to the end of the rod.
3. Move the cleaning rod back and forth through the barrel several times to remove any dirt or debris.
4. Repeat steps 2-3 with a dry cleaning patch to remove any remaining solvent.
5. Apply a few drops of gun oil to the inside of the barrel and slide.
6. Reassemble the Glock 26.

What are some common mistakes people make when cleaning their Glock 26?

• Using the wrong cleaning solvent or oil.
• Using too much solvent or oil.
• Not cleaning the gun thoroughly enough.
• Not reassembling the gun correctly.

How can I prevent my Glock 26 from becoming dirty?

• Keep your Glock 26 in a clean, dry place.
• Avoid shooting in dirty or dusty conditions.
• Clean your Glock 26 regularly.

What should I do if my Glock 26 is not functioning properly after I clean it?

If your Glock 26 is not functioning properly after you clean it, you should take it to a qualified gunsmith for inspection and repair.

cleaning your Glock 26 is an important part of maintaining its performance and safety. By following the steps in this guide, you can keep your Glock 26 in top condition for years to come.

Here are the key takeaways from this guide:

• Use a cleaning kit specifically designed for Glocks.
• Clean your Glock 26 after every use.
• Lubricate your Glock 26 with a light oil after cleaning.
• Be careful not to damage the firing pin safety plunger or the extractor during cleaning.
• If you are not comfortable cleaning your Glock 26, take it to a qualified gunsmith.