How to Clean Your Ruger 1022: A Step-by-Step Guide

How to Clean a Ruger 1022

The Ruger 1022 is a popular .22 LR rifle that is known for its reliability and accuracy. It is also a relatively easy gun to clean, making it a good choice for beginners. This guide will walk you through the process of cleaning a Ruger 1022, step-by-step.

We’ll start by taking a look at the different parts of the rifle that need to be cleaned, and then we’ll discuss the different cleaning tools and supplies that you’ll need. Once you have the necessary tools and supplies, we’ll walk you through the actual cleaning process.

By the end of this guide, you’ll know how to clean your Ruger 1022 so that it will keep running smoothly and accurately for years to come.

Step	Instructions	Image
1	Remove the bolt from the rifle.
2	Disassemble the bolt.
3	Clean the bolt assembly with a brush and solvent.
4	Lubricate the bolt assembly with a light coat of oil.
5	Reassemble the bolt and install it in the rifle.
6	Clean the exterior of the rifle with a cloth and solvent.
7	Apply a light coat of oil to the exterior of the rifle.

null

Disassembly

To disassemble a Ruger 1022, follow these steps:

1. Remove the magazine.
2. Lock the bolt back.
3. Depress the magazine release button and remove the magazine.
4. Pull back on the bolt handle and rotate it to the left until it is in the locked position.
5. Press the bolt release button and allow the bolt to move forward.
6. Remove the stock from the rifle by depressing the two stock release buttons located on the bottom of the stock and sliding the stock forward.
7. Remove the bolt from the rifle by pulling it straight back out of the receiver.
8. Remove the firing pin assembly from the bolt by depressing the firing pin retaining pin and sliding the firing pin assembly out of the bolt.
9. Remove the extractor from the bolt by depressing the extractor retaining pin and sliding the extractor out of the bolt.
10. Remove the bolt spring from the bolt by depressing the bolt spring retaining pin and sliding the bolt spring out of the bolt.

Cleaning

To clean a Ruger 1022, follow these steps:

1. Remove all of the parts from the rifle as described in the disassembly section.
2. Soak the parts in a cleaning solution such as Hoppe’s No. 9 or Shooter’s Choice.
3. Scrub the parts with a cleaning brush to remove all of the dirt and debris.
4. Rinse the parts thoroughly with water.
5. Dry the parts with a clean cloth.
6. Apply a light coat of oil to all of the moving parts.
7. Reassemble the rifle.

Reassembly

To reassemble a Ruger 1022, follow these steps:

1. Reassemble the rifle in the reverse order of disassembly.
2. Make sure that all of the parts are properly seated and that the rifle is functioning properly.

Storage

To store a Ruger 1022, follow these steps:

1. Clean the rifle thoroughly as described in the cleaning section.
2. Apply a light coat of oil to all of the moving parts.
3. Store the rifle in a clean, dry place.
4. Make sure that the rifle is unloaded and that the safety is engaged.

How often should I clean my Ruger 1022?

A: It is recommended to clean your Ruger 1022 after every 500 rounds fired. However, if you are shooting in dirty or dusty conditions, you may need to clean it more often.

What do I need to clean my Ruger 1022?

A: You will need the following items to clean your Ruger 1022:

• A cleaning rod
• A bore brush
• A cleaning solvent
• A gun oil
• A rag

How do I clean the barrel of my Ruger 1022?

A: To clean the barrel of your Ruger 1022, follow these steps:

1. Remove the bolt from the rifle.
2. Attach the cleaning rod to the bore brush.
3. Dip the bore brush in the cleaning solvent.
4. Insert the bore brush into the barrel and rotate it back and forth until the barrel is clean.
5. Remove the bore brush from the barrel and wipe it clean with a rag.
6. Repeat steps 3-5 until the cleaning solvent comes out of the barrel clean.
7. Apply a light coat of gun oil to the inside of the barrel.
8. Reattach the bolt to the rifle.

How do I clean the action of my Ruger 1022?

A: To clean the action of your Ruger 1022, follow these steps:

1. Remove the bolt from the rifle.
2. Use a cleaning brush to clean the inside of the receiver.
3. Use a rag to wipe down the outside of the receiver.
4. Apply a light coat of gun oil to the inside and outside of the receiver.
5. Reattach the bolt to the rifle.

How do I clean the magazine of my Ruger 1022?

A: To clean the magazine of your Ruger 1022, follow these steps:

1. Remove the magazine from the rifle.
2. Use a cleaning brush to clean the inside of the magazine.
3. Use a rag to wipe down the outside of the magazine.
4. Apply a light coat of gun oil to the inside and outside of the magazine.
5. Reinsert the magazine into the rifle.

How often should I lubricate my Ruger 1022?

A: It is recommended to lubricate your Ruger 1022 after every cleaning. You can use a light coat of gun oil on the moving parts of the rifle.

What should I do if my Ruger 1022 is not functioning properly?

A: If your Ruger 1022 is not functioning properly, you should take it to a qualified gunsmith for inspection and repair.

cleaning your Ruger 1022 is an important part of maintaining its accuracy and performance. By following the steps outlined in this guide, you can keep your rifle in top condition and ensure that it will function properly for many years to come.

Here are the key takeaways from this guide:

• Use a cleaning rod and bore brush to remove any dirt or debris from the barrel.
• Clean the action with a solvent and a toothbrush.
• Lubricate the action with a light oil.
• Be sure to dry the rifle thoroughly before storing it.

By following these simple steps, you can keep your Ruger 1022 clean and functioning properly for years to come.