How To Clean A Mossberg 500a?

How to Clean a Mossberg 500A

The Mossberg 500A is a popular pump-action shotgun that is known for its reliability and affordability. It is a versatile firearm that can be used for hunting, home defense, and competition shooting. However, like any firearm, it is important to clean the Mossberg 500A regularly to ensure that it functions properly and remains safe to use.

This guide will walk you through the process of cleaning a Mossberg 500A. We will cover everything from disassembling the gun to cleaning the individual parts. By following these steps, you can keep your Mossberg 500A in top condition and ensure that it is ready for any task.

Before you begin cleaning your Mossberg 500A, make sure that you have the following materials:

• Gun cleaning kit
• Gun oil
• Rags
• Solvent
• Safety glasses

Step 1: Disassemble the Mossberg 500A

The first step is to disassemble the Mossberg 500A so that you can access the individual parts. To do this, follow these steps:

1. Remove the magazine from the gun.
2. Open the action and lock the bolt to the rear.
3. Press the release button on the safety and slide the safety to the off position.
4. Remove the bolt assembly by pulling it straight back and out of the receiver.
5. Remove the fore-end by unscrewing the two screws that hold it in place.
6. Remove the barrel by unscrewing the barrel nut.

Step 2: Clean the individual parts

Now that the Mossberg 500A is disassembled, you can clean the individual parts. To do this, follow these steps:

1. Use a rag to wipe down the exterior of the gun.
2. Use solvent and a toothbrush to clean the bolt assembly.
3. Use a bore brush and solvent to clean the barrel.
4. Use a rag to wipe down the inside of the receiver.
5. Apply a thin coat of gun oil to all of the metal parts.

Step 3: Reassemble the Mossberg 500A

Once the individual parts are clean, you can reassemble the Mossberg 500A. To do this, follow these steps:

1. Insert the barrel into the receiver and screw on the barrel nut.
2. Reattach the fore-end by screwing in the two screws.
3. Insert the bolt assembly into the receiver and lock it to the rear.
4. Replace the magazine in the gun.
5. Slide the safety to the on position.

Step 4: Test the Mossberg 500A

Once the Mossberg 500A is reassembled, you should test it to make sure that it is functioning properly. To do this, load a few rounds of ammunition into the magazine and cycle the action several times. The gun should function smoothly and without any problems.

Step	Instructions	Image
1	Remove the magazine and any shells from the shotgun.
2	Open the action and lock the bolt to the rear.
3	Dip a clean, dry patch into gun oil and run it through the bore from the chamber end to the muzzle.
4	Use a bore brush to clean the bore.
5	Run a dry patch through the bore to remove any remaining residue.
6	Apply a light coat of gun oil to the inside of the action and bolt.
7	Reassemble the shotgun and you’re done!

How To Clean A Mossberg 500A?

The Mossberg 500A is a popular pump-action shotgun that is used for a variety of purposes, including hunting, self-defense, and target shooting. It is important to clean your Mossberg 500A regularly to maintain its performance and prevent rust. This guide will show you how to clean a Mossberg 500A in detail.

Safety Precautions

Before cleaning your Mossberg 500A, make sure that it is unloaded and the safety is engaged. This will prevent any accidental discharge. You should also wear eye protection and gloves to protect yourself from debris and sharp objects.

Disassembly

To disassemble your Mossberg 500A, follow these steps:

1. Remove the magazine.
2. Open the action and lock the bolt to the rear.
3. Remove the fore-end cap.
4. Remove the bolt assembly.
5. Remove the barrel.

Cleaning the Action

To clean the action of your Mossberg 500A, you will need a cleaning rod, a bore brush, a solvent, and a lubricant.

1. Dip the bore brush into the solvent and run it through the barrel several times.
2. Use a clean cloth to wipe down the inside of the receiver.
3. Apply a small amount of lubricant to the action and bolt assembly.

Cleaning the Barrel

To clean the barrel of your Mossberg 500A, you will need a cleaning rod, a bore brush, a solvent, and a patch.

1. Dip the bore brush into the solvent and run it through the barrel several times.
2. Use a clean patch to wipe down the inside of the barrel.
3. Repeat steps 1 and 2 until the barrel is clean.

Reassembly

To reassemble your Mossberg 500A, follow these steps in reverse order:

1. Insert the barrel into the receiver.
2. Install the bolt assembly.
3. Replace the fore-end cap.
4. Insert the magazine.

By following these steps, you can clean your Mossberg 500A in a safe and efficient manner. This will help to maintain its performance and prevent rust.

Additional Tips

• You can also use a gun cleaning kit to clean your Mossberg 500A.
• If your Mossberg 500A is heavily dirty, you may need to soak it in a solvent overnight before cleaning it.
• Be sure to dry your Mossberg 500A thoroughly after cleaning it.
• Store your Mossberg 500A in a clean, dry place.

How To Clean A Mossberg 500A?

Disassembly

To disassemble your Mossberg 500A, follow these steps:

1. Remove the magazine.
2. Depress the safety button and pull the trigger to release the bolt.
3. Remove the bolt by pulling it rearward and out of the receiver.
4. Remove the forend by unscrewing the two bolts at the front of the receiver.
5. Remove the barrel by pulling it rearward and out of the receiver.

Cleaning

To clean your Mossberg 500A, you will need the following materials:

• A soft cloth or brush
• A solvent, such as Hoppe’s No. 9 or Shooter’s Choice
• A cleaning brush
• A lubricant, such as Ballistol or Frog Lube

1. Use a soft cloth or brush to remove dirt and debris from the exterior of the gun.
2. Use a solvent and a cleaning brush to clean the bore of the barrel.
3. Use a lubricant to protect the metal surfaces of the gun.

Be sure to clean all of the moving parts of the gun, including the bolt, the action, and the trigger assembly.

Reassembly

To reassemble your Mossberg 500A, follow these steps:

1. Reinstall the barrel in the receiver.
2. Reinstall the forend by screwing the two bolts at the front of the receiver.
3. Insert the bolt into the receiver and push it forward until it is fully seated.
4. Depress the safety button and pull the trigger to engage the bolt.
5. Insert the magazine.

Your Mossberg 500A is now clean and ready to use.

By following these steps, you can clean your Mossberg 500A and keep it in good working order. For more information on cleaning your gun, consult your owner’s manual.

How do I clean a Mossberg 500A?

1. Disassemble the shotgun. Remove the magazine, bolt, and barrel.
2. Wipe down the exterior of the shotgun with a clean cloth. Be sure to remove any dirt, dust, or debris.
3. Clean the barrel with a cleaning rod and solvent. Push the cleaning rod through the barrel from the chamber end to the muzzle end, making sure to clean out any fouling or residue.
4. Clean the action with a toothbrush and solvent. Be sure to clean all of the moving parts of the action, including the bolt, trigger, and sear.
5. Reassemble the shotgun. Make sure that all of the parts are properly aligned and tightened before firing the shotgun.

What cleaning products should I use?

You can use a variety of cleaning products to clean your Mossberg 500A, including:

• Gun oil
• Solvent
• Bore cleaner
• Brushes
• Cloths

Be sure to read the manufacturer’s instructions for your specific cleaning products before using them.

How often should I clean my Mossberg 500A?

The frequency with which you clean your Mossberg 500A depends on how often you use it. If you shoot your shotgun regularly, you should clean it after every use. If you only shoot your shotgun occasionally, you can clean it every few months.

What should I do if my Mossberg 500A is not cycling properly?

There are a few things that could cause your Mossberg 500A to not cycle properly. Here are a few things to check:

• Make sure that the magazine is properly inserted and that the ammunition is the correct size for your shotgun.
• Make sure that the action is properly lubricated.
• Check the firing pin to make sure that it is not damaged.
• If you are still having problems, you may need to take your shotgun to a gunsmith for repairs.

What are some tips for cleaning a Mossberg 500A?

Here are a few tips for cleaning a Mossberg 500A:

• Take your time and be careful not to damage any of the parts.
• Use the right cleaning products for your shotgun.
• Clean all of the parts, including the inside of the barrel and the action.
• Reassemble the shotgun and make sure that it is properly lubricated.

By following these tips, you can help to keep your Mossberg 500A in good working condition and prevent any damage.

cleaning your Mossberg 500A is an important part of gun maintenance. By following the steps in this guide, you can ensure that your shotgun is clean and functioning properly.

Here are the key takeaways from this guide:

• Always wear eye protection when cleaning your gun.
• Use a cleaning rod and bore brush to clean the barrel.
• Use a solvent and patches to clean the action and other parts of the gun.
• Lubricate the gun with a light oil after cleaning.
• Store your gun in a safe place when not in use.

By following these steps, you can help keep your Mossberg 500A in good working order for many years to come.