How To Change Glock Magazine Release?
How to Change a Glock Magazine Release
The Glock magazine release is a small, but important, part of your Glock pistol. It’s responsible for releasing the magazine from the gun, so it’s important that it’s functioning properly. If your magazine release is broken or damaged, you’ll need to replace it.
Changing a Glock magazine release is a relatively simple process, but it’s important to follow the steps carefully to avoid damaging your gun. In this article, we’ll walk you through the steps of changing a Glock magazine release, so you can get your gun back in action quickly and easily.
Before You Begin
Before you begin, make sure you have the following materials:
- A new Glock magazine release
- A small flathead screwdriver
- A punch
- A hammer
- A piece of cloth
Step 1: Remove the Slide Stop
The first step is to remove the slide stop. To do this, use the flathead screwdriver to pry up the small tab on the side of the slide stop. Once the tab is pried up, you can use the punch and hammer to drive the slide stop out of the gun.
Step 2: Remove the Magazine Catch
The magazine catch is located on the left side of the frame. To remove it, use the flathead screwdriver to pry up the small tab on the side of the magazine catch. Once the tab is pried up, you can use the punch and hammer to drive the magazine catch out of the gun.
Step 3: Install the New Magazine Release
Now it’s time to install the new magazine release. To do this, simply reverse the steps you took to remove the old magazine release. First, insert the new magazine release into the gun. Then, use the punch and hammer to drive the magazine release into place.
Step 4: Reinstall the Slide Stop
Finally, reinstall the slide stop. To do this, simply reverse the steps you took to remove the slide stop. First, insert the slide stop into the gun. Then, use the flathead screwdriver to push down on the tab on the side of the slide stop until it snaps into place.
That’s It!
You’ve now successfully changed the magazine release on your Glock pistol. By following these simple steps, you can get your gun back in action quickly and easily.
| Step | Instructions | Image |
|---|---|---|
| 1 | Remove the slide from the frame. |  |
| 2 | Locate the magazine release button. |  |
| 3 | Push the magazine release button down and slide it out of the frame. |  |
| 4 | Insert the new magazine release button into the frame. |  |
| 5 | Push the magazine release button down and slide it back into place. |  |
Tools and Materials Needed
To change the magazine release on a Glock pistol, you will need the following tools and materials:
- A Glock armorer’s tool
- A punch
- A hammer
- A new magazine release
- A small amount of gun oil
Step-by-Step Instructions
1. Remove the magazine from the pistol.
2. Lock the slide back by pulling back on the slide stop and pushing down on the slide release lever.
3. Use the punch to drive out the pin that holds the magazine release in place.
4. Remove the old magazine release.
5. Apply a small amount of gun oil to the new magazine release.
6. Insert the new magazine release into the pistol.
7. Drive the pin back into place with the punch.
8. Release the slide stop and let the slide go forward.
9. Test the magazine release to make sure it is working properly.
Changing the magazine release on a Glock pistol is a relatively simple task that can be completed in a few minutes. By following the steps in this guide, you can safely and easily replace your magazine release with a new one.
How To Change Glock Magazine Release?
1. Tools and Materials
To change the magazine release on a Glock pistol, you will need the following tools and materials:
- A Glock armorer’s tool or a small punch
- A flathead screwdriver
- A small piece of metal (such as a nail or a paperclip)
- A small amount of gun oil
2. Steps
1. First, remove the magazine from the pistol.
2. Then, use the Glock armorer’s tool or a small punch to depress the magazine release spring plunger.
3. While depressing the spring plunger, use a flathead screwdriver to turn the magazine release clockwise until it comes loose.
4. Remove the magazine release from the pistol.
5. If necessary, clean the old magazine release and the inside of the pistol with a small amount of gun oil.
6. Insert the new magazine release into the pistol.
7. Use the Glock armorer’s tool or a small punch to install the magazine release spring plunger.
8. Rotate the magazine release counterclockwise until it is snug against the pistol.
9. Reinsert the magazine into the pistol.
3. Troubleshooting
If you are having trouble removing or installing the magazine release, there are a few things you can check:
- Make sure that you are using the correct tools.
- Make sure that you are depressing the magazine release spring plunger correctly.
- Make sure that you are turning the magazine release in the correct direction.
- If you are still having trouble, you can take your pistol to a qualified gunsmith for assistance.
4. Additional Tips and Tricks
Here are a few additional tips and tricks for changing the magazine release on a Glock pistol:
- It is important to use the correct tools when changing the magazine release. Using the wrong tools can damage the pistol.
- It is also important to follow the steps in the correct order. If you do not follow the steps in the correct order, you may damage the pistol.
- When reinstalling the magazine release, make sure that it is snug against the pistol. If the magazine release is not snug, it may not function properly.
- Before using your pistol after changing the magazine release, make sure to test it to make sure that it is functioning properly.
Changing the magazine release on a Glock pistol is a relatively simple task. However, it is important to follow the steps in the correct order and to use the correct tools. By following these tips, you can safely and easily change the magazine release on your Glock pistol.
How to Change Glock Magazine Release?
Q: What tools do I need to change the magazine release on my Glock?
A: You will need the following tools:
- A Glock magazine release tool
- A small flathead screwdriver
- A small punch
- A hammer
Q: How do I remove the old magazine release?
A: 1. Insert the Glock magazine release tool into the magazine release hole on the left side of the frame.
2. Use the flathead screwdriver to pry up on the magazine release until it pops out of the frame.
3. Use the punch to drive out the roll pin that secures the magazine release spring.
4. Remove the magazine release spring and the old magazine release.
Q: How do I install the new magazine release?
A: 1. Insert the new magazine release spring into the frame.
2. Insert the new magazine release into the frame and align it with the roll pin hole.
3. Use the punch to drive the roll pin through the magazine release and into the frame.
4. Use the flathead screwdriver to bend the ears of the magazine release over the roll pin.
Q: What is the difference between the standard and extended magazine releases?
A: The standard magazine release is located on the left side of the frame and is about 1/2 inch long. The extended magazine release is longer and is located further forward on the frame. The extended magazine release makes it easier to release the magazine with your thumb, especially if you have large hands.
Q: How do I know if I need an extended magazine release?
If you find it difficult to release the magazine with your thumb, you may want to consider an extended magazine release. Extended magazine releases are also a good option for people who have large hands or who wear gloves while shooting.
Q: Is it difficult to change the magazine release on a Glock?
No, it is not difficult to change the magazine release on a Glock. The process is relatively simple and can be completed in a few minutes with the right tools.
In this blog post, we have discussed how to change a Glock magazine release. We have covered the steps involved in the process, as well as some of the common mistakes that people make. We hope that this information has been helpful, and that you will be able to successfully change your Glock magazine release if necessary.
Here are some key takeaways from this blog post:
- The Glock magazine release is a small, but important part of the gun. It is responsible for releasing the magazine from the gun, so it is important to make sure that it is functioning properly.
- Changing the Glock magazine release is a relatively simple process, but it is important to follow the steps carefully to avoid making a mistake.
- Some of the common mistakes that people make when changing the Glock magazine release include using the wrong tools, not following the steps correctly, and not lubricating the new magazine release.
- By following the steps in this blog post, you can safely and easily change your Glock magazine release.