How to Change the Combination on Your Cannon Safe

How to Change a Cannon Gun Safe Combination

Your Cannon gun safe is a valuable investment that protects your firearms and other valuables. But what happens if you forget your combination or it gets damaged? Don’t worry, changing the combination on your Cannon gun safe is a relatively simple process.

In this article, we’ll walk you through the steps on how to change your Cannon gun safe combination. We’ll also provide some tips on how to keep your safe secure and your firearms safe.

So if you’re ready to learn how to change your Cannon gun safe combination, keep reading!

Step	Instructions	Image
1	Enter your current combination into the safe.
2	Press and hold the “Change Combination” button.
3	Enter your new combination.
4	Press the “Change Combination” button again.
5	Close the safe door.

Tools and Materials Needed

To change the combination on a Cannon gun safe, you will need the following tools and materials:

• Cannon gun safe
• Combination lock
• Phillips head screwdriver
• Paper and pen
• New combination

Steps to Change the Combination

1. Locate the combination lock on the front of the safe. The lock will be a small, rectangular box with a keypad.
2. Use the Phillips head screwdriver to remove the two screws that secure the lock to the safe.
3. Carefully pry the lock away from the safe. Be careful not to damage the safe or the lock.
4. Remove the old combination from the lock. The combination will be a series of numbers, usually four or five digits.
5. Write down the new combination. Make sure you write it down correctly so you don’t forget it.
6. Reinsert the old combination into the lock.
7. Replace the lock on the safe and secure it with the two screws.
8. Test the new combination. Enter the new combination into the keypad and make sure the safe opens.

Changing the combination on a Cannon gun safe is a simple process that can be completed in just a few minutes. By following these steps, you can ensure that your safe is secure and that only you know the combination.

Here are some additional tips for changing the combination on a Cannon gun safe:

• Make sure you write down the new combination in a safe place so you don’t forget it.
• Test the new combination regularly to make sure it is working properly.
• If you ever lose the combination to your safe, you can contact Cannon customer service for assistance.

Changing the combination on your Cannon gun safe is an important security measure that can help to keep your firearms safe from unauthorized access. By following these steps, you can easily change the combination and keep your safe secure.

How To Change A Cannon Gun Safe Combination?

Changing the combination on your Cannon gun safe is a simple process that can be completed in just a few minutes. Here are the steps involved:

1. Unlock the safe and open the door.
2. Locate the combination lock. The combination lock is located on the inside of the safe door. It is a small, rectangular device with a keypad.
3. Enter the current combination. The current combination is the one that you use to open the safe.
4. Press the [Change] button. This button is located below the keypad.
5. Enter the new combination. The new combination must be between 3 and 8 digits long.
6. Press the [Enter] button. The new combination is now set.

Note: If you forget your new combination, you can reset it by following the steps below:

1. Unlock the safe and open the door.
2. Locate the combination lock.
3. Enter the [Reset] button. This button is located below the keypad.
4. Enter the [Enter] button. The combination lock is now reset to the default combination of 0000.

Important: Always keep your combination safe in a secure location. If you lose your combination, you will not be able to open your safe.

Remove the screws from the back of the safe.

To remove the screws from the back of the safe, you will need a Phillips head screwdriver.

1. Locate the screws on the back of the safe. There are usually four screws, one in each corner.
2. Insert the Phillips head screwdriver into the screw head and turn counterclockwise until the screw is loose.
3. Repeat steps 1 and 2 for each screw.

Once you have removed all of the screws, the back of the safe should come off.

Open the safe and remove the combination lock.

To open the safe and remove the combination lock, you will need a flathead screwdriver.

1. Locate the combination lock on the inside of the safe door.
2. Insert the flathead screwdriver into the slot on the side of the combination lock and turn clockwise until the lock opens.
3. Remove the combination lock from the safe door.

Once you have removed the combination lock, you can now change the combination.

Changing the combination on your Cannon gun safe is a simple process that can be completed in just a few minutes. By following the steps above, you can easily keep your safe secure and protect your firearms.

How do I change the combination on my Cannon gun safe?

1. Turn the dial to the current combination.
2. Press and hold the reset button.
3. Turn the dial to the new combination.
4. Release the reset button.
5. Turn the dial to the new combination again to confirm.

What if I forget my combination?

1. Use the emergency override key to open the safe.
2. Reset the combination to a new one.
3. Be sure to write down the new combination and keep it in a safe place.

How often should I change my combination?

It is a good idea to change your combination regularly, especially if you have concerns about the security of your safe. You may also want to change your combination if you have moved to a new location or if you have loaned your safe to someone else.

What if I have other questions about my Cannon gun safe?

You can contact Cannon customer service for assistance. They can be reached by phone at 1-800-243-5505 or by email at [email protected]

Changing the combination on your Cannon gun safe is a simple process that can be completed in just a few minutes. By following the steps outlined in this guide, you can ensure that your safe is secure and that only you have access to its contents.

Here are the key takeaways from this guide:

• To change the combination on your Cannon gun safe, you will need the original combination, a new combination, and a paper clip.
• The process of changing the combination is as follows:
• Enter the original combination and open the safe.
• Press the Change Combination button.
• Enter the new combination twice.
• Press the Change Combination button again.
• Close the safe and test the new combination.
• If you forget your combination, you can reset it by following the steps outlined in the owners manual.
• It is important to keep your combination safe and secure so that only authorized individuals have access to your firearms.

By following these steps, you can ensure that your Cannon gun safe is secure and that only you have access to its contents.