How to Refinish a Wood Gun Stock for a Beautiful, Custom Look

ByBuffalo Rifles Blog

How to Redo a Wood Gun Stock

Whether you’re looking to restore an old heirloom or give your current rifle a new look, refinishing a wood gun stock is a relatively simple project that can be completed in a weekend. With a few basic tools and materials, you can transform a weathered or damaged stock into a beautiful work of art.

In this article, we’ll walk you through the steps of refinishing a wood gun stock, from stripping the old finish to applying the new one. We’ll also provide tips on choosing the right materials and techniques for your project. So whether you’re a seasoned gunsmith or a complete beginner, read on for everything you need to know about how to redo a wood gun stock.

How To Redo A Wood Gun Stock?

| Step | Task | Tools |
|—|—|—|
| 1 | Remove the old stock | Screwdriver, hammer, chisel |
| 2 | Sand the stock | Sandpaper, orbital sander |
| 3 | Apply stain or finish | Stain, polyurethane, lacquer |
| 4 | Reattach the stock | Screws, glue |

How to Redo a Wood Gun Stock

A wood gun stock is a valuable part of any firearm. It can add to the gun’s appearance, improve its performance, and protect the gun from damage. However, over time, a wood gun stock can become worn and damaged. If this happens, you may want to consider refinishing the stock.

Refinishing a wood gun stock is a relatively simple process, but it does require some time and effort. However, if you follow the steps in this guide, you can easily restore your gun stock to its former glory.

Preparing the Stock

The first step in refinishing a wood gun stock is to prepare the stock. This involves removing the stock from the gun, sanding the stock to remove any old finish, and applying a wood conditioner to the stock.

To remove the stock from the gun, you will need to disassemble the gun. The exact steps for doing this will vary depending on the type of gun you have. However, in general, you will need to remove the screws or pins that hold the stock in place.

Once the stock is removed, you can begin sanding it. Start by using a coarse grit sandpaper to remove any large scratches or blemishes. Then, switch to a finer grit sandpaper to smooth out the surface of the stock.

Be careful not to sand the stock too much, as this can damage the wood. Once you are satisfied with the smoothness of the stock, you can apply a wood conditioner to it. This will help to protect the wood and make it easier to apply the finish.

Applying the Finish

The next step is to apply the finish to the stock. The type of finish you use will depend on the type of wood you are using. For example, oil-based finishes are typically used for walnut stocks, while lacquer-based finishes are typically used for maple stocks.

To apply the finish, you will need to follow the manufacturer’s instructions. However, in general, you will need to apply the finish in thin coats, allowing each coat to dry completely before applying the next coat.

It is important to apply the finish evenly and to avoid any drips or runs. Once you have applied the finish, you will need to let it dry completely. This may take several days, depending on the type of finish you are using.

Refinishing a wood gun stock is a relatively simple process, but it does require some time and effort. However, if you follow the steps in this guide, you can easily restore your gun stock to its former glory.

Here are some tips for refinishing a wood gun stock:

  • Use high-quality materials.
  • Take your time and do not rush the process.
  • Be careful not to sand the stock too much.
  • Apply the finish evenly and avoid drips or runs.

With a little care and attention, you can easily refinish your wood gun stock and give it a new lease on life.

3. Protecting the Finish

Once you have finished refinishing your gun stock, it is important to protect the finish to prevent it from wearing down. You can do this by applying a coat of wax or oil to the stock.

Wax is a good choice for protecting a gun stock because it creates a barrier between the wood and the elements. It also helps to waterproof the stock, which can be important if you plan on using your gun in wet weather.

Oil is another good option for protecting a gun stock. Oil helps to moisturize the wood and prevent it from drying out. It also helps to bring out the natural beauty of the wood.

When applying wax or oil to your gun stock, be sure to use a soft cloth. Apply the wax or oil in a thin layer, and buff it in until it is evenly distributed.

You should reapply wax or oil to your gun stock as needed. The frequency with which you need to reapply the wax or oil will depend on how often you use your gun and the conditions in which you use it.

4. Reassembling the Gun

Once you have finished refinishing your gun stock, it is time to reassemble the gun.

To reassemble the gun, follow these steps:

1. Reattach the stock to the gun.
2. Insert the barrel into the receiver.
3. Secure the barrel to the receiver with the barrel nut.
4. Reattach the handguard to the barrel.
5. Reattach the bolt to the gun.
6. Reattach the trigger assembly to the gun.
7. Reattach the magazine to the gun.

Once you have reassembled the gun, test it to make sure it is functioning properly.

Refinishing a gun stock is a relatively simple process that can be completed in a few hours. By following the steps in this guide, you can restore your gun stock to its former glory and protect it from future damage.

Here are some additional tips for refinishing a gun stock:

  • Use high-quality materials. The quality of the materials you use will affect the final finish of your gun stock.
  • Take your time. Refinishing a gun stock can be a time-consuming process, but it is important to take your time and do it right.
  • Be patient. The finish on your gun stock will not look perfect right away. It will take time for the finish to cure and develop its full beauty.

If you have any questions about refinishing a gun stock, be sure to consult with a qualified gunsmith.

How do I prepare the wood stock for refinishing?

To prepare the wood stock for refinishing, you will need to:

1. Remove all old finish. You can do this by sanding the stock with a coarse grit sandpaper, followed by a medium grit sandpaper.
2. Clean the stock with a degreaser or mineral spirits.
3. Apply a wood conditioner to the stock. This will help to protect the wood and prevent the new finish from soaking in too deeply.
4. Let the stock dry completely before moving on to the next step.

What type of finish should I use on a wood gun stock?

The type of finish you use on a wood gun stock will depend on the desired look and feel. Some common options include:

  • Oil finishes are a good choice for a natural look. They are easy to apply and maintain, but they do not provide as much protection as other types of finishes.
  • Lacquer finishes provide a hard, durable finish that is resistant to scratches and water. They are more difficult to apply than oil finishes, but they are also more durable.
  • Polyurethane finishes are a good compromise between oil and lacquer finishes. They provide a durable finish that is easy to apply and maintain.

How do I apply a finish to a wood gun stock?

To apply a finish to a wood gun stock, you will need to:

1. Prepare the stock by sanding it with a fine grit sandpaper.
2. Wipe the stock down with a tack cloth to remove any dust.
3. Apply the finish in thin coats, letting each coat dry completely before applying the next.
4. Sand the finish lightly between coats to smooth it out.
5. Apply a final coat of finish and let it dry completely.

How do I care for a wood gun stock?

To care for a wood gun stock, you will need to:

  • Keep it clean and free of dirt and debris.
  • Avoid exposing it to extreme heat or cold.
  • Use a gun oil or wax to protect the finish.
  • Refinish the stock as needed to keep it looking its best.

What are some common problems with wood gun stocks?

Some common problems with wood gun stocks include:

  • Cracking
  • Warping
  • Staining
  • Delamination

These problems can be caused by a variety of factors, including:

  • Improper storage
  • Exposure to extreme weather conditions
  • Use of harsh chemicals
  • Improper refinishing

If you experience any problems with your wood gun stock, it is important to have it repaired or replaced by a qualified gunsmith.

How can I prevent problems with my wood gun stock?

To prevent problems with your wood gun stock, you can:

  • Store it in a cool, dry place.
  • Avoid exposing it to extreme weather conditions.
  • Use a gun oil or wax to protect the finish.
  • Refinish the stock as needed to keep it looking its best.

By following these tips, you can help to extend the life of your wood gun stock and keep it looking its best.

Refinishing a wood gun stock is a relatively simple process, but it does require some patience and attention to detail. By following the steps outlined in this guide, you can restore your gun stock to its former glory and protect it from future damage.

Here are the key takeaways from this guide:

  • The first step is to remove the old finish from the stock. This can be done using a variety of methods, such as sanding, chemical stripping, or heat.
  • Once the old finish is removed, you will need to sand the stock to smooth out any rough spots.
  • Next, you will need to apply a new finish to the stock. There are many different types of finishes available, so choose one that is appropriate for your needs.
  • Finally, you will need to let the finish dry completely before using your gun.

By following these steps, you can easily refinish your wood gun stock and give it a new lease on life.

Similar Posts