How To Break Down A Mossberg 500?
How to Break Down a Mossberg 500
The Mossberg 500 is a popular shotgun for home defense, hunting, and sporting clays. It’s a reliable and easy-to-use gun, but it’s important to know how to break it down for cleaning and maintenance. In this article, we’ll walk you through the process of breaking down a Mossberg 500 step-by-step.
We’ll start with a brief overview of the gun’s parts, then we’ll get into the details of how to remove each part. By the end of this article, you’ll be able to break down and reassemble your Mossberg 500 with ease.
So, if you’re ready to learn how to break down a Mossberg 500, let’s get started!
How To Break Down A Mossberg 500?
| Step | Action | Tool |
|—|—|—|
| 1 | Remove the magazine | Magazine release |
| 2 | Open the action | Action release |
| 3 | Remove the bolt | Bolt release |
| 4 | Remove the barrel | Barrel nut wrench |
| 5 | Clean and lubricate the firearm | Cleaning kit |
| 6 | Reassemble the firearm | |
How to Break Down a Mossberg 500?
The Mossberg 500 is a popular shotgun that is known for its reliability and ease of use. It is a good choice for both beginners and experienced shooters. However, like any firearm, it is important to know how to properly disassemble and reassemble the Mossberg 500 in order to clean it and maintain it properly.
This guide will walk you through the steps of disassembling and reassembling a Mossberg 500. It is important to note that this guide is only for informational purposes and should not be used as a substitute for professional gunsmithing advice. If you are unsure about how to properly disassemble or reassemble your Mossberg 500, please consult with a qualified gunsmith.
1. Safety Precautions
Before disassembling your Mossberg 500, make sure that it is unloaded and that the safety is engaged. This will help to prevent any accidents from occurring.
2. Disassembling the Action
To disassemble the action of the Mossberg 500, you will need to:
1. Remove the magazine.
2. Unlock the action by pulling back on the slide release and then pushing the bolt forward.
3. Remove the bolt by pulling it out of the receiver.
4. Remove the firing pin assembly by unscrewing the firing pin retaining pin.
3. Disassembling the Barrel
To disassemble the barrel of the Mossberg 500, you will need to:
1. Remove the fore-end cap.
2. Remove the barrel nut.
3. Slide the barrel off of the receiver.
4. Reassembling the Mossberg 500
To reassemble the Mossberg 500, you will need to:
1. Reattach the barrel to the receiver.
2. Screw on the barrel nut.
3. Replace the fore-end cap.
4. Insert the bolt into the receiver.
5. Engage the safety.
6. Load the magazine.
Disassembling and reassembling a Mossberg 500 is a relatively simple process. However, it is important to follow the steps carefully in order to avoid any accidents. If you are unsure about how to properly disassemble or reassemble your Mossberg 500, please consult with a qualified gunsmith.
Additional Resources
- [Mossberg 500 Owner’s Manual](https://www.mossberg.com/assets/pdfs/500_owners_manual.pdf)
- [Mossberg 500 Disassembly Video](https://www.youtube.com/watch?v=592_336312Y)
How To Break Down A Mossberg 500?
The Mossberg 500 is a popular shotgun that is used for hunting, self-defense, and law enforcement. It is a reliable and easy-to-use firearm, but it is important to know how to properly break it down for cleaning and maintenance.
This guide will show you how to break down a Mossberg 500 in four easy steps.
1. Disassembling the Action
1. Remove the magazine.
2. Press down on the safety and pull the trigger to release the bolt.
3. Remove the bolt by pulling it straight back out of the receiver.
4. Remove the firing pin assembly by pushing down on the retaining pin and sliding the assembly out of the bolt.
2. Disassembling the Trigger Group
1. Remove the stock from the receiver by unscrewing the two stock bolts.
2. Remove the trigger assembly by pulling it straight out of the receiver.
3. Remove the hammer spring by depressing the spring retainer and sliding the spring out of the receiver.
4. Remove the hammer by depressing the hammer spring and sliding the hammer out of the receiver.
3. Disassembling the Barrel
1. Remove the fore-end by unscrewing the two barrel lug screws.
2. Remove the barrel by pulling it out of the receiver.
4. Reassembling the Mossberg 500
1. Reassemble the barrel and fore-end in the reverse order of disassembly.
2. Reinsert the bolt and firing pin assembly.
3. Insert the magazine.
4. Engage the safety.
By following these steps, you can easily break down your Mossberg 500 for cleaning and maintenance. Be sure to keep all of the parts organized and in a safe place so that you can reassemble the firearm quickly and easily.
Additional Tips
- When disassembling the Mossberg 500, be sure to keep the safety engaged at all times.
- Use a clean, dry cloth to wipe down all of the parts before reassembling the firearm.
- Apply a small amount of oil to the moving parts of the firearm before reassembling it.
- Store the firearm in a safe place when it is not in use.
By following these tips, you can help to keep your Mossberg 500 in good working order for years to come.
How do I break down a Mossberg 500?
1. Remove the magazine.
2. Lock the bolt to the rear.
3. Press the release button on the bottom of the receiver and slide the fore-end off.
4. Remove the bolt assembly by pulling it straight back out of the receiver.
5. To reassemble the shotgun, reverse the steps above.
What tools do I need to break down a Mossberg 500?
You will need a small flathead screwdriver to remove the magazine cap and a cleaning rod to push out the firing pin retaining pin.
Can I break down a Mossberg 500 without tools?
Yes, you can break down a Mossberg 500 without tools, but it is much easier to do with a small flathead screwdriver.
What is the difference between a Mossberg 500 and a Mossberg 590?
The Mossberg 500 and the Mossberg 590 are both pump-action shotguns, but there are a few key differences between the two models. The Mossberg 500 has a shorter barrel and a lighter weight than the Mossberg 590. The Mossberg 590 also has a larger capacity magazine than the Mossberg 500.
What is the best way to clean a Mossberg 500?
The best way to clean a Mossberg 500 is to first remove the magazine and the bolt assembly. Then, use a cleaning rod and solvent to clean the bore and chamber. Be sure to also clean the action and the magazine well. Finally, apply a light coat of oil to all of the metal surfaces.
How often should I clean my Mossberg 500?
You should clean your Mossberg 500 after every use, or at least once a month if you do not shoot it very often.
What are the most common problems with Mossberg 500s?
The most common problems with Mossberg 500s are feeding problems and ejection problems. These problems can usually be traced to a dirty or worn-out magazine spring.
How can I fix a feeding problem with my Mossberg 500?
If your Mossberg 500 is having a feeding problem, you can try cleaning the magazine and the magazine spring. If that does not fix the problem, you may need to replace the magazine spring.
How can I fix an ejection problem with my Mossberg 500?
If your Mossberg 500 is having an ejection problem, you can try cleaning the ejection port and the bolt assembly. If that does not fix the problem, you may need to replace the ejector.
In this comprehensive guide, we have discussed how to break down a Mossberg 500 shotgun. We started by discussing the different parts of the shotgun and how they work together. Then, we walked you through the step-by-step process of breaking down the shotgun, from removing the magazine to taking out the bolt. We also provided some tips and tricks to help you make the process easier.
We hope that this guide has been helpful and that you feel confident in your ability to break down your Mossberg 500 shotgun. Remember, it is always important to practice gun safety when handling any firearm. Be sure to keep the gun pointed in a safe direction and follow all of the safety precautions listed in your owner’s manual.
Here are some key takeaways from this guide:
- The Mossberg 500 is a popular shotgun that is used for a variety of purposes, including hunting, self-defense, and target shooting.
- The shotgun is made up of several different parts, including the barrel, receiver, bolt, and magazine.
- To break down the shotgun, you will need to remove the magazine, take out the bolt, and unscrew the barrel from the receiver.
- It is important to practice gun safety when handling any firearm. Be sure to keep the gun pointed in a safe direction and follow all of the safety precautions listed in your owner’s manual.