What Height Scope Rings for a 50mm Objective Lens?

What Height Scope Rings for 50mm?

When you’re mounting a scope on your rifle, one of the most important factors to consider is the height of the scope rings. The height of the scope rings will determine how far the scope sits above the bore of the rifle, and this will in turn affect the eye relief of the scope. Eye relief is the distance between the rear of the scope and your eye when you’re looking through the scope. If the eye relief is too short, you’ll have to put your eye too close to the scope, which can be uncomfortable and can also cause eye fatigue. If the eye relief is too long, you’ll have to hold your head at an awkward angle to see through the scope.

The ideal eye relief for a scope will vary depending on the individual shooter, but a good rule of thumb is to have about 1.5 inches of eye relief. This will allow you to comfortably see through the scope without having to strain your eyes.

The height of the scope rings will also affect the overall balance of the rifle. If the scope is too high, it can make the rifle feel top-heavy and difficult to control. If the scope is too low, it can make it difficult to get a good cheek weld on the stock.

So, how do you determine what height scope rings you need for your rifle? There are a few factors to consider:

• The height of the scope body.
• The type of mount you’re using.
• The distance between the scope and the bore of the rifle.

The height of the scope body is the most important factor to consider. The height of the scope rings should be equal to the height of the scope body plus the amount of eye relief you need.

The type of mount you’re using will also affect the height of the scope rings. Some mounts are taller than others, so you’ll need to make sure that the scope rings you choose are compatible with the mount you’re using.

The distance between the scope and the bore of the rifle is also important. If the scope is too close to the bore, it can cause problems with accuracy. If the scope is too far from the bore, it can make it difficult to see through the scope.

By considering all of these factors, you can determine what height scope rings you need for your rifle.

In this article, we’ll discuss the different factors to consider when choosing scope rings, and we’ll provide some tips on how to install them properly. We’ll also recommend some specific scope rings that are well-suited for 50mm scopes.

Scope Ring Height	Eye Relief	Recommended Mount
1.00″	3.5″	Weaver 20 MOA
1.50″	3.75″	Weaver 40 MOA
2.00″	4.0″	Weaver 60 MOA

Factors to Consider When Choosing Scope Rings for a 50mm Scope

When choosing scope rings for a 50mm scope, there are a few factors you need to consider. These include:

• The size of the scope: The size of the scope will determine the size of the scope rings you need. Make sure to measure the diameter of the scope tube before you buy scope rings.
• The height of the scope rings: The height of the scope rings will determine how far the scope will be above the rifle. This is important to consider if you have a low-profile mount or if you want to be able to use a cheek riser.
• The material of the scope rings: Scope rings are typically made from aluminum, steel, or carbon fiber. Aluminum is the most affordable option, but steel and carbon fiber are stronger and more durable.
• The finish of the scope rings: The finish of the scope rings can affect how they look and how they perform. Matte finishes are less reflective than shiny finishes, which can be an advantage in low-light conditions.
• The weight of the scope rings: Scope rings can add weight to your rifle, so it’s important to choose a lightweight option if you’re concerned about weight.

Once you’ve considered these factors, you can start shopping for scope rings. There are a wide variety of scope rings available on the market, so you’re sure to find a pair that meets your needs.

Different Types of Scope Rings for 50mm Scopes

There are three main types of scope rings for 50mm scopes:

• Fixed scope rings: Fixed scope rings are the most common type of scope rings. They are permanently attached to the rifle and cannot be adjusted.
• Adjustable scope rings: Adjustable scope rings can be moved up and down to achieve the perfect height for your scope. They are more expensive than fixed scope rings, but they offer more flexibility.
• Quick-release scope rings: Quick-release scope rings allow you to quickly and easily remove the scope from the rifle. This can be useful if you need to take your rifle apart for cleaning or storage.

Each type of scope ring has its own advantages and disadvantages. Fixed scope rings are the most affordable and simple to use, but they offer the least amount of flexibility. Adjustable scope rings are more expensive and require more adjustment, but they allow you to fine-tune the height of your scope. Quick-release scope rings are the most convenient, but they are also the most expensive.

When choosing scope rings for a 50mm scope, you need to consider your budget, your needs, and your preferences. If you’re not sure which type of scope rings is right for you, talk to a qualified gunsmith or sporting goods salesperson.

Scope rings are an important part of any rifle setup. They hold the scope securely in place and allow you to make adjustments to the scope’s position. When choosing scope rings for a 50mm scope, there are a few factors you need to consider, including the size of the scope, the height of the scope rings, the material of the scope rings, the finish of the scope rings, and the weight of the scope rings. There are three main types of scope rings for 50mm scopes: fixed scope rings, adjustable scope rings, and quick-release scope rings. Each type of scope ring has its own advantages and disadvantages. You need to choose the type of scope rings that is right for you based on your budget, your needs, and your preferences.

3. How to Install Scope Rings on a 50mm Scope

Installing scope rings on a 50mm scope is a relatively simple process, but it is important to do it correctly to ensure that the scope is properly aligned and secure. Here are the steps involved in installing scope rings on a 50mm scope:

1. Choose the right scope rings. The first step is to choose the right scope rings for your rifle. Scope rings come in a variety of sizes, so it is important to make sure that you choose rings that are the right diameter for your scope. You will also need to choose rings that are the right height for your scope. The height of the rings will determine how far the scope will be from the barrel of your rifle.
2. Mount the scope rings to the rifle. Once you have chosen the right scope rings, you can mount them to the rifle. Most scope rings come with a set of screws that you can use to attach them to the rifle. Make sure that the screws are tight enough to hold the rings in place, but not so tight that you damage the rings or the rifle.
3. Install the scope. Once the scope rings are mounted to the rifle, you can install the scope. Most scopes come with a set of rings that you can use to attach the scope to the rings. Make sure that the scope is properly aligned and that it is secure before you use it.

Here are some tips for installing scope rings on a 50mm scope:

• Use a torque wrench to tighten the screws that hold the scope rings in place. This will help to ensure that the rings are properly secured and that you do not damage the rings or the rifle.
• Make sure that the scope is properly aligned before you tighten the screws that hold it in place. This will help to ensure that the scope is accurate and that you get the best possible performance out of it.
• If you are not comfortable installing scope rings yourself, you can take your rifle to a gunsmith. A gunsmith will be able to install the scope rings for you and make sure that they are properly aligned.

4. Tips for Choosing the Right Scope Rings for Your 50mm Scope

When choosing scope rings for your 50mm scope, there are a few things you need to consider. These include:

• The diameter of the scope rings. The diameter of the scope rings must match the diameter of the scope tube.
• The height of the scope rings. The height of the scope rings will determine how far the scope will be from the barrel of your rifle.
• The material of the scope rings. Scope rings are typically made from aluminum, steel, or titanium. Aluminum rings are the lightest, but they are also the least durable. Steel rings are more durable than aluminum rings, but they are also heavier. Titanium rings are the most durable, but they are also the most expensive.
• The finish of the scope rings. Scope rings are available in a variety of finishes, including black, silver, and gold. The finish of the scope rings will not affect their performance, but it may affect the appearance of your rifle.

Here are a few tips for choosing the right scope rings for your 50mm scope:

• If you are not sure what size or height of scope rings you need, consult with a gunsmith or a knowledgeable salesperson.
• Make sure that the scope rings are made from a durable material.
• Choose a finish that will match the appearance of your rifle.

By following these tips, you can choose the right scope rings for your 50mm scope and ensure that you get the best possible performance out of it.

What Height Scope Rings Do I Need for a 50mm Objective Lens?

The height of scope rings you need for a 50mm objective lens will depend on the height of your rifle’s receiver and the type of scope you are using.

To determine the correct height of scope rings, you will need to measure the distance from the top of your rifle’s receiver to the center of your rifle’s bore. This measurement is called the “eye relief” of your rifle. Once you have this measurement, you can consult the scope manufacturer’s specifications to determine the height of scope rings you need.

For example, if your rifle has an eye relief of 3.5 inches and you are using a scope with a 50mm objective lens, you will need scope rings that are 3.5 inches high.

Here is a table that provides a general guideline for the height of scope rings you need for different types of rifles and scopes:

| Rifle Type | Scope Type | Recommended Scope Ring Height |
|—|—|—|
| Bolt-action rifle | Low-power variable optic (LPVO) | 1 inch |
| Bolt-action rifle | Medium-power variable optic (MPVO) | 1.5 inches |
| Bolt-action rifle | High-power variable optic (HVPO) | 2 inches |
| Semi-automatic rifle | LPVO | 1.5 inches |
| Semi-automatic rifle | MPVO | 2 inches |
| Semi-automatic rifle | HVPO | 2.5 inches |

What Are the Different Types of Scope Rings?

There are two main types of scope rings:

• Riser rings are scope rings that have a raised base, which allows you to mount your scope higher on your rifle. This can be helpful if you have a long eye relief scope or if you want to improve your field of view.
• Tactical rings are scope rings that are designed for use with AR-15s and other tactical rifles. They typically have a wider base than riser rings, which helps to provide a more secure attachment for your scope.

How Do I Mount Scope Rings on My Rifle?

To mount scope rings on your rifle, you will need the following tools:

• A set of scope ring screws
• A torque wrench
• A set of Allen wrenches
• A level

1. Install the scope base on your rifle. Most rifles come with a pre-installed scope base, but if yours does not, you will need to install one before you can mount your scope rings. Scope bases are typically made of aluminum or steel and are secured to the rifle’s receiver with screws.
2. Install the scope rings on the scope base. Scope rings are typically made of aluminum or steel and are secured to the scope base with screws. Make sure that the scope rings are installed in the same plane as each other and that they are level.
3. Mount the scope on the scope rings. Most scopes come with a set of scope rings, but if yours does not, you will need to purchase a set. Scope rings are typically made of aluminum or steel and are secured to the scope with screws. Make sure that the scope is mounted securely in the scope rings and that it is level.

How Do I Adjust Scope Rings?

Scope rings typically have two adjustment screws, one for windage and one for elevation. To adjust the windage, turn the windage adjustment screw on the left side of the scope ring clockwise to move the scope to the right or counterclockwise to move the scope to the left. To adjust the elevation, turn the elevation adjustment screw on the right side of the scope ring clockwise to move the scope up or counterclockwise to move the scope down.

What Are the Benefits of Using Scope Rings?

There are several benefits to using scope rings, including:

• Increased stability: Scope rings provide a more stable platform for your scope than other mounting methods, such as a dovetail mount. This can help to improve accuracy, especially at longer ranges.
• Greater versatility: Scope rings can be adjusted to accommodate different types of scopes and different eye reliefs. This allows you to fine-tune the setup of your rifle for your specific needs.
• Easy to install: Scope rings are relatively easy to install, even for beginners. This means that you can get your scope up and running quickly and easily.

What Are the Disadvantages of Using Scope Rings?

There are a few disadvantages to using scope rings, including:

• Increased weight: Scope rings add weight to your rifle, which can

  the best scope rings for a 50mm objective lens will depend on your individual needs and preferences. However, the following factors should be considered when making a decision:

• The type of rifle you will be using
• The type of scope you will be using
• Your shooting preferences
• Your budget

By taking these factors into account, you can choose the best scope rings for your 50mm objective lens and achieve the best possible shooting experience.

Here are some key takeaways from this article:

• The height of the scope rings will depend on the height of your scope’s ocular bell.
• The diameter of the scope rings will need to match the diameter of your scope’s tube.
• The material of the scope rings should be strong and durable.
• The design of the scope rings should be comfortable and easy to use.
• The price of the scope rings will vary depending on the materials used and the features included.

By considering all of these factors, you can choose the best scope rings for your 50mm objective lens and improve your shooting accuracy and performance.