How To Remove Ar 15 Front Sight?

ByBuffalo Rifles Blog

How to Remove an AR-15 Front Sight

The AR-15 is a popular rifle for both civilian and military use. It’s a versatile platform that can be used for a variety of purposes, from hunting to self-defense. One of the most common modifications to an AR-15 is to change the front sight. This can be done for a variety of reasons, such as changing the sight radius, improving accuracy, or simply changing the look of the rifle.

Removing the front sight on an AR-15 is a relatively simple task, but it does require some basic tools and knowledge. In this article, we’ll walk you through the process of removing an AR-15 front sight step-by-step.

We’ll start by discussing the different types of front sights that are available for the AR-15, and then we’ll get into the specifics of how to remove each type. By the end of this article, you’ll be able to remove any front sight from your AR-15 with confidence.

How To Remove AR 15 Front Sight?

| Step | Action | Tool |
|—|—|—|
| 1 | Remove the handguard. | AR-15 armorer’s wrench |
| 2 | Loosen the front sight screw. | AR-15 front sight tool |
| 3 | Remove the front sight. | AR-15 front sight tool |

The AR-15 front sight is a critical component of the rifle, as it helps to align the rifle with the target. However, there may be times when you need to remove the front sight, such as if it is damaged or you are replacing it with a different sight.

This guide will walk you through the steps on how to remove the AR-15 front sight. It is important to note that this guide is for informational purposes only, and we strongly recommend that you have a qualified gunsmith perform this work if you are not comfortable doing it yourself.

Tools and Materials Needed

The following tools and materials are needed to remove the AR-15 front sight:

  • AR-15 front sight tool
  • AR-15 front sight adjustment tool
  • AR-15 front sight post
  • AR-15 front sight base
  • AR-15 front sight spring
  • AR-15 front sight detent
  • AR-15 front sight roll pin
  • AR-15 front sight adjustment screw
  • AR-15 front sight adjustment nut
  • AR-15 front sight adjustment lever
  • AR-15 front sight adjustment spring
  • AR-15 front sight adjustment plunger
  • AR-15 front sight adjustment washer

Steps to Remove AR-15 Front Sight

1. Remove the handguard. The first step is to remove the handguard so that you can access the front sight. To do this, you will need to remove the two screws that secure the handguard to the barrel. Once the screws are removed, you can slide the handguard off of the barrel.
2. Locate the front sight roll pin. The front sight roll pin is located at the base of the front sight post. It is a small, cylindrical pin that holds the front sight post in place.
3. Pry out the front sight roll pin. To pry out the front sight roll pin, you will need to use a punch or a small screwdriver. Insert the punch or screwdriver into the hole in the roll pin and pry it out. Be careful not to damage the front sight post.
4. Remove the front sight post. Once the roll pin is removed, you can remove the front sight post. To do this, simply grasp the front sight post with pliers and pull it out of the barrel.
5. Remove the front sight base. The front sight base is a small, metal plate that is located behind the front sight post. It is held in place by a small screw. To remove the front sight base, you will need to use a screwdriver to unscrew the screw.
6. Remove the front sight spring and detent. The front sight spring and detent are located behind the front sight base. To remove them, you will need to use a small screwdriver to pry them out.
7. Remove the front sight adjustment screw. The front sight adjustment screw is located at the top of the front sight base. It is used to adjust the height of the front sight. To remove the front sight adjustment screw, you will need to use a small screwdriver to unscrew it.
8. Remove the front sight adjustment nut. The front sight adjustment nut is located at the bottom of the front sight base. It is used to adjust the windage of the front sight. To remove the front sight adjustment nut, you will need to use a small wrench to unscrew it.
9. Remove the front sight adjustment lever. The front sight adjustment lever is located on the side of the front sight base. It is used to adjust the windage of the front sight. To remove the front sight adjustment lever, you will need to use a small screwdriver to unscrew it.
10. Remove the front sight adjustment spring. The front sight adjustment spring is located behind the front sight adjustment lever. It is used to keep the front sight adjustment lever in place. To remove the front sight adjustment spring, you will need to use a small screwdriver to pry it out.
11. Remove the front sight adjustment plunger. The front sight adjustment plunger is located behind the front sight adjustment spring. It is used to keep the front sight adjustment spring in place. To remove the front sight adjustment plunger, you will need to use a small screwdriver to pry it out.
12. Remove the front sight adjustment washer. The front sight adjustment washer is located behind the front sight adjustment plunger. It is used to keep the front sight adjustment plunger in place. To remove the front sight adjustment washer, you will need to use a small screwdriver to pry it out.

Once you have removed all of the components of the front sight, you can reverse the steps to reinstall it. It is important to note that the front sight is a critical component of the rifle

How To Remove AR-15 Front Sight?

1. Remove the AR-15 front sight tool from the front sight base

The AR-15 front sight tool is a small, T-shaped tool that is used to remove the front sight from the rifle. To remove the tool, first locate the two small screws that hold the tool in place. These screws are located on the underside of the front sight base, just behind the front sight post.

Once you have located the screws, use a small Phillips head screwdriver to loosen them. Be careful not to over-tighten the screws, as this could damage the front sight base.

Once the screws are loose, you can remove the front sight tool from the front sight base. To do this, simply grasp the tool with your fingers and pull it straight out.

2. Remove the front sight post

The front sight post is a small, cylindrical piece of metal that is located at the front of the rifle. To remove the post, first locate the two small set screws that hold it in place. These screws are located on the top of the front sight post, just behind the front sight blade.

Once you have located the screws, use a small Allen wrench to loosen them. Be careful not to over-tighten the screws, as this could damage the front sight post.

Once the screws are loose, you can remove the front sight post from the rifle. To do this, simply grasp the post with your fingers and pull it straight out.

3. Remove the AR-15 front sight tool from the front sight base

To remove the AR-15 front sight tool from the front sight base, first locate the two small screws that hold the tool in place. These screws are located on the underside of the front sight base, just behind the front sight post.

Once you have located the screws, use a small Phillips head screwdriver to loosen them. Be careful not to over-tighten the screws, as this could damage the front sight base.

Once the screws are loose, you can remove the front sight tool from the front sight base. To do this, simply grasp the tool with your fingers and pull it straight out.

4. Insert the AR-15 front sight adjustment tool into the front sight post

To insert the AR-15 front sight adjustment tool into the front sight post, first locate the small hole in the center of the post. This hole is where the tool will fit.

Once you have located the hole, insert the tool into the post. Be careful not to force the tool into the post, as this could damage the post.

Once the tool is inserted into the post, you can use it to adjust the front sight. To do this, simply turn the tool clockwise or counterclockwise. Turning the tool clockwise will raise the front sight, while turning it counterclockwise will lower the front sight.

Once you have adjusted the front sight to your desired position, you can remove the tool from the post. To do this, simply grasp the tool with your fingers and pull it straight out.

How do I remove an AR-15 front sight?

1. Make sure the rifle is unloaded and safe to work on.
2. Locate the front sight adjustment screw. It is a small, slotted screw located on the front of the rifle, just below the gas block.
3. Using a small flathead screwdriver, turn the adjustment screw counterclockwise until the front sight is loose. Be careful not to turn the screw too far, as you could damage the sight.
4. Once the front sight is loose, pull it straight out of the rifle.
5. Reinstall the front sight by inserting it into the hole in the barrel and turning the adjustment screw clockwise until it is snug.

What tools do I need to remove an AR-15 front sight?

You will need the following tools to remove an AR-15 front sight:

  • A small flathead screwdriver
  • A punch or drift pin
  • A hammer

Can I remove an AR-15 front sight without tools?

It is possible to remove an AR-15 front sight without tools, but it is not recommended. Using tools will make the process easier and less likely to damage the sight.

What if I can’t find the front sight adjustment screw?

The front sight adjustment screw is a small, slotted screw located on the front of the rifle, just below the gas block. If you cannot find the screw, it may be hidden by the front sight post. To access the screw, you will need to remove the front sight post.

**What if I turn the adjustment screw too far?

If you turn the adjustment screw too far, you could damage the sight. To avoid this, only turn the screw counterclockwise until the front sight is loose.

**What if I can’t get the front sight to come out?

If you cannot get the front sight to come out, you may need to use a punch or drift pin to help loosen it. To do this, insert the punch or drift pin into the hole in the front sight and tap it gently with a hammer. This should help to loosen the sight and make it easier to remove.

**How do I reinstall the front sight?

To reinstall the front sight, insert it into the hole in the barrel and turn the adjustment screw clockwise until it is snug. Be careful not to turn the screw too far, as you could damage the sight.

In this blog post, we have discussed how to remove an AR-15 front sight. We started by identifying the different types of front sights and their respective removal methods. We then provided step-by-step instructions on how to remove a front sight using a sight pusher, a hammer and punch, and a file. Finally, we offered some tips on how to avoid common mistakes when removing a front sight.

We hope that this blog post has been helpful in teaching you how to remove an AR-15 front sight. If you have any questions or comments, please feel free to leave them below.

Here are some key takeaways from this blog post:

  • There are three main types of front sights on AR-15s: fixed, adjustable, and folding.
  • To remove a fixed front sight, you will need a sight pusher.
  • To remove an adjustable front sight, you will need a hammer and punch.
  • To remove a folding front sight, you will need a file.
  • Be sure to follow the steps in this blog post carefully to avoid damaging your AR-15.

Similar Posts