How To Remove Glock Back Plate?
How to Remove a Glock Backplate
The Glock pistol is a popular choice for self-defense and law enforcement use. One of the most common Glock modifications is to replace the stock backplate with a custom one. This can be done for a variety of reasons, such as to personalize the gun, improve aesthetics, or add functionality.
Removing the Glock backplate is a simple process that can be completed in just a few minutes. However, it is important to follow the proper steps to avoid damaging your gun.
In this article, we will walk you through the process of removing a Glock backplate. We will provide step-by-step instructions and tips to help you get the job done quickly and easily.
So, if you’re ready to learn how to remove a Glock backplate, read on!
| Step | Instructions | Image |
|---|---|---|
| 1 | Depress the takedown lever and lock the slide back. |  |
| 2 | Using a Glock Armorer’s Tool, push the pin out of the back of the slide. |  |
| 3 | Remove the back plate. |  |
How to Remove Glock Back Plate?
Tools Needed
To remove the back plate of a Glock pistol, you will need the following tools:
- A Glock Armorer’s Tool or Glock Pin Punch
- A small flathead screwdriver
Step-by-Step Instructions
1. Depress the slide lock lever. This will allow you to move the slide forward and expose the rear of the slide.
2. Insert the Glock Armorer’s Tool or Glock Pin Punch into the hole in the rear of the slide. The tool should be inserted so that the tip is facing towards the front of the slide.
3. Use the Glock Armorer’s Tool or Glock Pin Punch to push the slide stop pin out of the slide. The slide stop pin is a small, cylindrical piece of metal that holds the slide stop in place.
4. Once the slide stop pin is out, the slide stop will fall out of the slide.
5. Use the small flathead screwdriver to pry up the back plate. The back plate is a small, rectangular piece of metal that covers the rear of the slide.
6. Once the back plate is pried up, you can remove it from the slide.
Important Note: Be careful not to damage the slide or the back plate when removing them.
Removing the back plate of a Glock pistol is a relatively simple task. However, it is important to follow the steps carefully in order to avoid damaging the slide or the back plate. If you are not comfortable performing this task, you should take your pistol to a qualified gunsmith.
How to Remove a Glock Back Plate
Removing the back plate of a Glock pistol is a relatively simple task that can be completed in a few minutes. However, it is important to follow the proper steps in order to avoid damaging the gun.
Tools Needed
To remove the back plate of a Glock pistol, you will need the following tools:
- A Glock Armorer’s Tool or Glock Pin Punch
- A small flathead screwdriver
Steps
1. Remove the magazine from the pistol.
2. Lock the slide back by pulling back on the slide stop lever and then releasing it.
3. Insert the Glock Armorer’s Tool or Glock Pin Punch into the hole in the back of the slide, just above the trigger guard.
4. Use the small flathead screwdriver to pry up on the back plate, while pushing down on the Glock Armorer’s Tool or Glock Pin Punch.
5. The back plate will pop out of the slide.
Tips
- Be careful not to damage the Glock Armorer’s Tool or Glock Pin Punch.
- Do not use excessive force when prying up on the back plate.
- If you are having trouble removing the back plate, you can try using a rubber mallet to tap on the Glock Armorer’s Tool or Glock Pin Punch.
Removing the back plate of a Glock pistol is a relatively simple task that can be completed in a few minutes. However, it is important to follow the proper steps in order to avoid damaging the gun. By following the steps outlined in this guide, you can safely and easily remove the back plate of your Glock pistol.
How do I remove the back plate of a Glock?
1. Depress the slide lock lever and pull the slide back to its full rearward position.
2. Using a Glock tool or a small punch, insert the tool into the hole in the rear of the slide and push down on the back plate release spring.
3. While holding down the back plate release spring, use your other hand to push the back plate down and out of the slide.
What tools do I need to remove the back plate of a Glock?
You will need a Glock tool or a small punch to remove the back plate of a Glock.
Can I use a paperclip to remove the back plate of a Glock?
No, you should not use a paperclip to remove the back plate of a Glock. A paperclip is not strong enough and could damage the back plate or the slide.
What happens if I drop the back plate while I’m removing it?
If you drop the back plate while you’re removing it, it is possible that it could become damaged. Be careful not to drop the back plate and keep it in a safe place while you’re working on your Glock.
How do I put the back plate back on a Glock?
1. Align the back plate with the slide and insert it into the slide.
2. Push the back plate up until it snaps into place.
3. Depress the slide lock lever and release the slide.
removing the back plate of a Glock pistol is a simple process that can be completed in a few steps. By following the steps outlined in this article, you can safely and easily remove the back plate of your Glock pistol for cleaning, maintenance, or other purposes.
Here are the key takeaways from this article:
- The back plate of a Glock pistol is held in place by two small pins.
- To remove the back plate, you will need to use a Glock tool or a small punch.
- Insert the tool or punch into the hole in the back plate and push down on the pin.
- Repeat this process for the second pin.
- Once the pins are removed, the back plate can be lifted off of the pistol.
By following these steps, you can safely and easily remove the back plate of your Glock pistol.