How To Take Apart A 9mm Ruger?
How to Take Apart a 9mm Ruger
Ruger 9mm pistols are some of the most popular and reliable handguns on the market. They’re also relatively easy to take apart for cleaning and maintenance. In this article, we’ll walk you through the process of disassembling a Ruger 9mm pistol, step-by-step.
We’ll start with a brief overview of the different parts of the pistol, and then we’ll get into the details of how to remove each part. By the end of this article, you’ll be able to take your Ruger 9mm pistol apart and put it back together again with ease.
So, if you’re ready to learn how to take apart a 9mm Ruger, let’s get started!
| Step | Instructions | Image |
|---|---|---|
| 1 | Lock the slide back and remove the magazine. |  |
| 2 | Press the disassembly button and pull the slide forward. |  |
| 3 | Remove the barrel and recoil spring assembly. |  |
How to Take Apart a 9mm Ruger?
This guide will show you how to safely disassemble a Ruger 9mm pistol. It is important to follow all of the safety precautions listed in this guide to avoid injury.
Safety Precautions
- Before disassembling your Ruger 9mm, make sure the firearm is unloaded and the safety is engaged.
- Wear eye protection to protect your eyes from any debris that may be released during disassembly.
- Work in a well-ventilated area to avoid inhaling any fumes or dust.
- Use the proper tools to disassemble your Ruger 9mm.
Disassembling the Slide
1. Remove the magazine from the firearm.
2. Lock the slide back.
3. Press the disassembly button located on the left side of the frame and slide the slide forward off the frame.
4. Remove the recoil spring assembly from the slide.
Disassembling the Frame
1. Remove the slide from the frame.
2. Remove the two grip screws located on the bottom of the frame.
3. Pull the grip panels off of the frame.
4. Remove the trigger assembly from the frame.
5. Remove the hammer assembly from the frame.
6. Remove the firing pin assembly from the frame.
Reassembling the Ruger 9mm
1. Reassemble the firing pin assembly in the frame.
2. Reassemble the hammer assembly in the frame.
3. Reassemble the trigger assembly in the frame.
4. Insert the grip panels into the frame and secure them with the two grip screws.
5. Slide the slide onto the frame.
6. Press the disassembly button and slide the slide forward until it locks into place.
This guide has shown you how to safely disassemble a Ruger 9mm pistol. It is important to follow all of the safety precautions listed in this guide to avoid injury. If you have any questions about disassembling your Ruger 9mm, please consult with a qualified gunsmith.
Disassembling the Slide
To disassemble the slide, follow these steps:
1. With the gun pointed in a safe direction, pull back the slide and lock it open.
2. Using a small punch or screwdriver, depress the slide stop plunger located on the right side of the slide.
3. While depressing the slide stop plunger, move the slide forward off of the frame.
4. Remove the recoil spring assembly from the slide.
Disassembling the Frame
To disassemble the frame, follow these steps:
1. Remove the grip screws from the bottom of the frame.
2. Remove the grip panels.
3. Remove the trigger assembly from the frame.
4. Remove the hammer assembly from the frame.
Removing the Trigger Assembly
To remove the trigger assembly, follow these steps:
1. Rotate the trigger assembly lock lever 90 degrees clockwise.
2. Pull the trigger assembly out of the frame.
Removing the Hammer Assembly
To remove the hammer assembly, follow these steps:
1. Rotate the hammer strut lock lever 90 degrees clockwise.
2. Pull the hammer assembly out of the frame.
Reassembling the Ruger 9mm
To reassemble the Ruger 9mm, follow these steps:
1. Reassemble the hammer assembly, trigger assembly, and grip panels in the reverse order of disassembly.
2. Reinstall the grip screws.
3. Insert the recoil spring assembly into the slide.
4. Slide the slide forward onto the frame.
5. Release the slide lock.
Disassembling and reassembling a Ruger 9mm is a relatively simple task. By following these steps, you can safely and easily maintain your firearm.
How do I take apart a 9mm Ruger?
1. Remove the magazine.
2. Lock the slide back.
3. Depress the takedown lever and rotate the slide 90 degrees clockwise.
4. Remove the slide from the frame.
5. Remove the recoil spring and guide rod from the slide.
6. Remove the barrel from the slide.
What tools do I need to take apart a 9mm Ruger?
You will need a small flathead screwdriver and a punch.
What is the difference between a takedown lever and a slide release?
The takedown lever is a lever located on the left side of the frame that is used to release the slide from the frame. The slide release is a lever located on the right side of the frame that is used to release the slide from the locked-back position.
Can I take apart a 9mm Ruger without tools?
It is possible to take apart a 9mm Ruger without tools, but it is not recommended. Using tools will make the process easier and less likely to damage the firearm.
What should I do if I get stuck while taking apart my 9mm Ruger?
If you get stuck while taking apart your 9mm Ruger, do not force it. Stop and consult the owner’s manual or a qualified gunsmith.
What is the best way to clean a 9mm Ruger?
To clean a 9mm Ruger, you will need a cleaning kit, gun oil, and a toothbrush.
1. Remove the slide from the frame.
2. Remove the recoil spring and guide rod from the slide.
3. Remove the barrel from the slide.
4. Clean the inside of the slide with a cleaning brush and gun oil.
5. Clean the outside of the slide with a toothbrush and gun oil.
6. Clean the barrel with a cleaning rod and gun oil.
7. Reassemble the firearm.
How often should I clean my 9mm Ruger?
You should clean your 9mm Ruger after every use. If you shoot your firearm frequently, you may need to clean it more often.
In this tutorial, we have shown you how to take apart a 9mm Ruger pistol. We started by removing the magazine and clearing the chamber. Then, we disassembled the slide and frame, removing the barrel, recoil spring, and guide rod. We also showed you how to reassemble the pistol.
We hope that this tutorial has been helpful. If you have any questions, please feel free to leave them in the comments below.