How To Oil An Ar 15?

ByBuffalo Rifles Blog

Step Instructions Image
1 Make sure the AR-15 is unloaded and safe to work on.
2 Remove the dust cover and forward assist.
3 Apply a small amount of oil to the bolt carrier group (BCG).
4 Reinstall the dust cover and forward assist.
5 Cycle the action a few times to distribute the oil.

How to Oil an AR-15?

Tools and Materials

To oil an AR-15, you will need the following tools and materials:

  • AR-15 cleaning kit
  • Gun oil
  • Q-tips or cleaning patches
  • Rag or paper towels
  • Boresnake or cleaning rod
  • Solvent (optional)

Safety Precautions

Before you begin cleaning and oiling your AR-15, it is important to take some safety precautions.

  • Make sure the gun is unloaded and the safety is on.
  • Wear eye protection and gloves.
  • Work in a well-ventilated area.
  • Keep children and pets away from the work area.

Step 1: Clean the exterior of the gun

To clean the exterior of the gun, start by wiping it down with a dry rag or paper towel. This will remove any dirt, dust, or debris.

If the gun is particularly dirty, you can use a solvent to clean it. Apply the solvent to a rag or paper towel and wipe down the gun. Be sure to avoid getting solvent in the trigger assembly or other moving parts.

Once the gun is clean, dry it thoroughly with a dry rag or paper towel.

Step 2: Clean the bore

The bore is the inside of the barrel. It is important to clean the bore thoroughly to remove any dirt, dust, or debris that could cause a malfunction.

To clean the bore, you will need a boresnake or cleaning rod. A boresnake is a flexible, coiled wire with a brush on one end. A cleaning rod is a straight metal rod with a brush on one end and a jag on the other end.

To use a boresnake, simply insert it into the barrel and pull it through. The brush will clean the inside of the barrel.

To use a cleaning rod, attach the brush to the jag and insert it into the barrel. Push the rod through the barrel until it comes out the other end. Repeat this step several times until the bore is clean.

Step 3: Oil the gun

Once the gun is clean, it is time to oil it. Oiling the gun will help to protect it from rust and corrosion.

To oil the gun, apply a small amount of oil to a rag or paper towel. Then, wipe down the moving parts of the gun, such as the bolt, bolt carrier, and trigger assembly. Be sure to avoid getting oil on the trigger or other parts that could cause a malfunction.

Once the gun is oiled, dry it off with a dry rag or paper towel.

Step 4: Reassemble the gun

Once the gun is clean and oiled, you can reassemble it. Be sure to follow the instructions in your owner’s manual.

Cleaning and oiling your AR-15 is an important part of gun maintenance. By following these steps, you can help to keep your gun in good working order and prevent it from becoming damaged.

Here are some additional tips for cleaning and oiling your AR-15:

  • Clean the gun more often if you shoot it frequently.
  • Use a light coat of oil. Too much oil can attract dirt and dust.
  • Store the gun in a dry, cool place.
  • Avoid exposing the gun to extreme heat or cold.

By following these tips, you can help to keep your AR-15 in good working order for many years to come.

How to Oil the AR-15

The AR-15 is a popular rifle for both hunting and self-defense. It is a relatively simple firearm to operate and maintain, but it is important to keep it properly lubricated to ensure that it functions smoothly and reliably.

There are a few different ways to oil an AR-15, but the most common method is to use a small amount of gun oil on a clean cloth and wipe down the moving parts of the rifle. This includes the bolt carrier group, the receiver, and the barrel.

It is important to use a light coat of oil, as too much oil can actually cause problems with the rifle’s operation. You should also avoid getting oil on the firing pin or the trigger, as this can make the rifle more likely to misfire.

Here are the steps on how to oil an AR-15:

1. Remove the magazine from the rifle.
2. Lock the bolt back to the rear.
3. Use a clean cloth to apply a small amount of gun oil to the following areas:

  • The bolt carrier group
  • The receiver
  • The barrel

4. Wipe away any excess oil.
5. Reinsert the magazine and charge the rifle.

You should oil your AR-15 after every cleaning and before each use. If you are shooting in dusty or dirty conditions, you may need to oil the rifle more frequently.

Troubleshooting

If your AR-15 is not functioning properly, it may be due to a lack of lubrication. Here are some troubleshooting tips:

  • If the rifle is not cycling properly, check to make sure that the bolt carrier group is properly lubricated.
  • If the rifle is not firing, check to make sure that the firing pin is properly lubricated.
  • If the rifle is jamming, check to make sure that the barrel is properly lubricated.

If you are still having problems with your AR-15, you may need to take it to a gunsmith for further diagnosis and repair.

Properly lubricating your AR-15 is essential for ensuring that it functions smoothly and reliably. By following the steps outlined in this article, you can keep your rifle in top condition and enjoy years of trouble-free shooting.

How often should I oil my AR-15?

  • Answer: AR-15s should be oiled after every use, and more frequently if the rifle is used in dusty or dirty conditions.

What kind of oil should I use on my AR-15?

  • Answer: Any gun oil that is specifically designed for firearms is a good option. Some popular choices include:
  • Mil-Spec CLP (Cleaner, Lubricant, Preservative)
  • Break-Free CLP
  • Froglube Extreme
  • Hoppes No. 9

How much oil should I use on my AR-15?

  • Answer: A small amount of oil is all that is needed. A few drops on the bolt carrier group, the trigger group, and the barrel is usually sufficient.

How do I apply oil to my AR-15?

  • Answer: You can apply oil to your AR-15 using a clean cloth, a Q-tip, or a small brush. Be sure to wipe away any excess oil after applying.

What should I do if my AR-15 is dry?

  • Answer: If your AR-15 is dry, it will likely function poorly and may even jam. You should immediately apply a small amount of oil to the rifle and then operate it to distribute the oil evenly.

What should I do if my AR-15 is over-oiled?

  • Answer: If your AR-15 is over-oiled, it may cause the rifle to malfunction. You should wipe away any excess oil with a clean cloth.

What are the signs of an AR-15 that needs to be oiled?

  • Answer: The following are signs that your AR-15 needs to be oiled:
  • The rifle is difficult to operate
  • The rifle jams
  • The rifle makes strange noises
  • The rifle is dirty or dusty

How can I prevent my AR-15 from becoming dry or over-oiled?

  • Answer: To prevent your AR-15 from becoming dry or over-oiled, you should:
  • Oil the rifle after every use
  • Use a light coat of oil
  • Wipe away any excess oil

    there are a few key things to remember when oiling your AR-15. First, use a quality oil that is specifically designed for firearms. Second, apply the oil sparingly, as too much oil can actually be detrimental to the gun. Third, make sure to oil all of the moving parts of the gun, including the bolt carrier group, the trigger group, and the barrel. Finally, wipe away any excess oil after you are finished. By following these simple steps, you can help to keep your AR-15 in good working order and ensure that it performs reliably for years to come.

Here are some key takeaways from this article:

  • Use a quality oil that is specifically designed for firearms.
  • Apply the oil sparingly, as too much oil can actually be detrimental to the gun.
  • Oil all of the moving parts of the gun, including the bolt carrier group, the trigger group, and the barrel.
  • Wipe away any excess oil after you are finished.

Similar Posts