How To Remove Bolt From Remington 700?

ByBuffalo Rifles Blog

How to Remove the Bolt from a Remington 700

The Remington 700 is a popular bolt-action rifle that is used for hunting, target shooting, and self-defense. It is a well-made and reliable rifle, but it is important to know how to properly maintain it. One of the most important maintenance tasks is to remove the bolt and clean it regularly. This will help to keep the rifle functioning properly and prevent it from becoming damaged.

In this article, we will show you how to remove the bolt from a Remington 700. We will provide step-by-step instructions, along with photos and illustrations. We will also discuss some of the reasons why it is important to remove the bolt and clean it regularly.

So, if you own a Remington 700, or are thinking about buying one, read on to learn how to remove the bolt and keep your rifle in top condition.

Step Instructions Image
1 Depress the bolt release button.
2 Grasp the bolt handle and rotate it counterclockwise until it comes out of the receiver.
3 Pull the bolt out of the receiver.

How To Remove Bolt From Remington 700?

The Remington 700 is a popular bolt-action rifle that is used for hunting, target shooting, and self-defense. The bolt is the part of the rifle that loads and fires the cartridges. It is important to know how to remove the bolt from your Remington 700 in order to clean and maintain it properly.

This guide will show you how to remove the bolt from a Remington 700 in a few simple steps.

Safety Precautions

Before removing the bolt from your Remington 700, make sure that the rifle is unloaded and the safety is engaged.

Always wear eye protection when working on your rifle.

Tools Needed

To remove the bolt from a Remington 700, you will need the following tools:

  • A Remington 700 bolt removal tool
  • A cleaning rod
  • A soft cloth

Step-by-Step Instructions

1. With the rifle unloaded and the safety engaged, remove the magazine.
2. Lock the bolt open by pulling back on the bolt handle and rotating it to the left.
3. Insert the bolt removal tool into the hole in the back of the bolt.
4. Turn the bolt removal tool clockwise until the bolt is released.
5. Pull the bolt out of the rifle.
6. Use the cleaning rod and a soft cloth to clean the bolt.
7. Reassemble the bolt and replace the magazine.

By following these steps, you can safely and easily remove the bolt from your Remington 700. This will allow you to clean and maintain your rifle properly.

Here are some additional tips for removing the bolt from a Remington 700:

  • If the bolt is stuck, you can try tapping it lightly with a hammer or mallet.
  • If the bolt is still stuck, you can try using a penetrating oil to loosen it.
  • Be careful not to damage the bolt when removing it.

If you have any questions about removing the bolt from your Remington 700, you can contact a qualified gunsmith for assistance.

How To Remove Bolt From Remington 700?

The Remington 700 is a popular bolt-action rifle that is used for hunting, target shooting, and competition. The bolt is the part of the rifle that loads and fires the cartridges. It is important to know how to remove the bolt from the Remington 700 in order to clean and maintain the rifle.

Tools Needed

To remove the bolt from the Remington 700, you will need the following tools:

  • A cleaning rod
  • A bore brush
  • A gun oil
  • A rag

Steps

1. Remove the magazine from the rifle.
2. Lock the bolt to the rear of the rifle.
3. Depress the bolt release button and pull the bolt out of the rifle.

Remove the magazine from the rifle

1. Press the magazine release button located on the left side of the rifle.
2. Pull the magazine out of the rifle.

Lock the bolt to the rear of the rifle

1. Pull the bolt handle to the rear of the rifle.
2. Press the bolt release button.

Depress the bolt release button and pull the bolt out of the rifle

1. Depress the bolt release button located on the left side of the rifle.
2. Pull the bolt out of the rifle.

By following these steps, you can easily remove the bolt from your Remington 700. This will allow you to clean and maintain the rifle properly.

How do I remove the bolt from a Remington 700?

1. With the rifle unloaded and the safety on, open the bolt action by pulling back on the bolt handle and rotating it to the left.
2. Grasp the bolt handle with one hand and the bolt body with the other.
3. Pull the bolt handle straight back until it stops.
4. Turn the bolt handle clockwise until it is in the vertical position.
5. While holding the bolt handle in the vertical position, use your other hand to push down on the bolt release button.
6. The bolt will now be free to be removed from the rifle.

What tools do I need to remove the bolt from a Remington 700?

You will need the following tools to remove the bolt from a Remington 700:

  • A 3/8-inch Allen wrench
  • A small screwdriver

What is the procedure for removing the bolt from a Remington 700?

1. With the rifle unloaded and the safety on, open the bolt action by pulling back on the bolt handle and rotating it to the left.
2. Grasp the bolt handle with one hand and the bolt body with the other.
3. Pull the bolt handle straight back until it stops.
4. Turn the bolt handle clockwise until it is in the vertical position.
5. While holding the bolt handle in the vertical position, use your other hand to push down on the bolt release button.
6. The bolt will now be free to be removed from the rifle.

What are the common mistakes people make when removing the bolt from a Remington 700?

The most common mistakes people make when removing the bolt from a Remington 700 are:

  • Trying to remove the bolt while the rifle is loaded.
  • Not opening the bolt action all the way.
  • Not turning the bolt handle clockwise until it is in the vertical position.
  • Not pushing down on the bolt release button while removing the bolt.

How can I prevent common mistakes when removing the bolt from a Remington 700?

To prevent common mistakes when removing the bolt from a Remington 700, follow these tips:

  • Always unload the rifle before removing the bolt.
  • Make sure the bolt action is open all the way.
  • Turn the bolt handle clockwise until it is in the vertical position.
  • Push down on the bolt release button while removing the bolt.

What are the potential consequences of incorrectly removing the bolt from a Remington 700?

If the bolt is not removed correctly, it could damage the rifle or injure the user. Some of the potential consequences of incorrectly removing the bolt include:

  • The bolt could become stuck in the rifle.
  • The bolt could damage the bolt lugs or the receiver.
  • The user could be injured by the bolt or the rifle.

    In this blog post, we have discussed how to remove the bolt from a Remington 700. We started by discussing the tools and materials you will need. Then, we walked you through the steps of removing the bolt, step-by-step. Finally, we provided some tips and tricks for troubleshooting any problems you may encounter.

We hope this blog post has been helpful. If you have any questions, please do not hesitate to contact us.

Similar Posts