How To Disassemble Glock 17?

ByBuffalo Rifles Blog

How to Disassemble a Glock 17

The Glock 17 is a popular handgun that is used by law enforcement and civilians alike. It is a reliable and easy-to-use firearm, but it is important to know how to properly disassemble it for cleaning and maintenance. In this article, we will walk you through the steps of disassembling a Glock 17.

We will provide you with a brief overview of the process, but we will not go into detail about each individual step. For more detailed instructions, please refer to the owner’s manual for your Glock 17.

Disassembling a Glock 17 is a relatively simple process, but it is important to follow the steps carefully to avoid damaging the firearm.

How To Disassemble Glock 17?

| Step | Description | Tools |
|—|—|—|
| 1 | Remove the magazine. | |
| 2 | Lock the slide back. | Slide lock |
| 3 | Press the disassembly lever down. | |
| 4 | Pull the slide forward and off the frame. | |
| 5 | Remove the recoil spring assembly. | |
| 6 | Remove the barrel. | |
| 7 | Reassemble the Glock 17. | |

How to Disassemble a Glock 17

Safety Precautions

Before you begin disassembling your Glock 17, it is important to take some safety precautions.

  • Make sure the gun is unloaded. This is the most important safety precaution of all. Check the chamber to make sure there is no round in the gun.
  • Clear the magazine. Remove the magazine from the gun and visually inspect it to make sure there are no rounds in it.
  • Lock the slide back. With the magazine removed, pull the slide back and hold it in place with your thumb. This will prevent the gun from firing accidentally.

Disassembling the Slide

To disassemble the slide of a Glock 17, follow these steps:

1. With the slide locked back, press the slide release lever down and pull the slide off the frame.
2. Remove the recoil spring assembly from the slide.
3. Remove the striker assembly from the slide.

To reassemble the slide, reverse these steps.

Additional Disassembly Steps

In addition to the steps listed above, you may also need to disassemble the following parts of your Glock 17:

  • The barrel
  • The trigger assembly
  • The firing pin safety
  • The magazine catch

To disassemble these parts, you will need to use a Glock disassembly tool.

For more detailed instructions on disassembling your Glock 17, please consult the owner’s manual.

Disassembling your Glock 17 is a relatively simple process, but it is important to take all of the necessary safety precautions. By following the steps outlined in this guide, you can safely disassemble your Glock 17 for cleaning, maintenance, or repair.

Disassembling the Slide

To disassemble the slide of a Glock 17, follow these steps:

1. With the slide locked to the rear, push the disassembly lever down and forward.
2. Pull the slide forward off the frame.
3. Remove the recoil spring assembly from the slide.
4. Remove the barrel from the slide.

Disassembling the Frame

To disassemble the frame of a Glock 17, follow these steps:

1. Remove the magazine from the gun.
2. Depress the trigger and lock the slide to the rear.
3. Remove the disassembly pin from the left side of the frame.
4. Separate the slide from the frame.
5. Remove the trigger housing assembly from the frame.
6. Remove the striker assembly from the trigger housing assembly.
7. Remove the firing pin assembly from the striker assembly.
8. Remove the extractor and ejector from the slide.

Reassembling the Glock 17

To reassemble the Glock 17, follow these steps:

1. Insert the firing pin assembly into the striker assembly.
2. Insert the extractor and ejector into the slide.
3. Insert the striker assembly into the trigger housing assembly.
4. Insert the trigger housing assembly into the frame.
5. Insert the disassembly pin into the left side of the frame.
6. Move the slide forward onto the frame until it locks into place.
7. Depress the trigger and release the slide to the rear.
8. Insert the magazine into the gun.

Disassembling and reassembling a Glock 17 is a simple process that can be completed in a few minutes. By following these steps, you can ensure that your Glock 17 is properly maintained and ready to use.

Here are some additional tips for disassembling and reassembling a Glock 17:

  • Use a clean, dry cloth to wipe down the gun before and after disassembly.
  • Be careful not to lose any small parts during disassembly.
  • If you are unsure how to disassemble or reassemble your Glock 17, consult the owner’s manual or a qualified gunsmith.

By following these tips, you can safely and effectively disassemble and reassemble your Glock 17.

How do I disassemble a Glock 17?

1. Ensure the firearm is unloaded and the magazine is removed.
2. Depress the slide lock lever and pull the slide rearward until it is fully in battery.
3. While holding the slide in the rearward position, use a Glock disassembly tool or a small punch to depress the trigger bar striker assembly retaining pin.
4. Remove the trigger bar striker assembly from the slide.
5. Release the slide and allow it to move forward.
6. Remove the slide stop from the slide.
7. Remove the barrel and recoil spring assembly from the slide.

What tools do I need to disassemble a Glock 17?

You will need the following tools to disassemble a Glock 17:

  • A Glock disassembly tool or a small punch
  • A cleaning cloth or rag

What is the difference between field stripping and full disassembly of a Glock 17?

Field stripping is the process of removing the slide and barrel from the frame for cleaning and maintenance. Full disassembly is the process of removing all of the internal components from the frame for more thorough cleaning and maintenance.

How often should I disassemble my Glock 17?

You should disassemble your Glock 17 for cleaning and maintenance as needed. However, it is a good idea to disassemble it at least once every six months.

What should I do if I can’t disassemble my Glock 17?

If you are having trouble disassembling your Glock 17, there are a few things you can check:

  • Make sure that the firearm is unloaded and the magazine is removed.
  • Make sure that you are using the correct tools.
  • Make sure that you are following the instructions carefully.

If you are still having trouble, you can contact a Glock-certified gunsmith for assistance.

What are the safety precautions I should take when disassembling a Glock 17?

When disassembling a Glock 17, it is important to take the following safety precautions:

  • Always ensure that the firearm is unloaded and the magazine is removed.
  • Never point the firearm at yourself or anyone else.
  • Use a cleaning cloth or rag to protect your hands from the sharp edges of the firearm.
  • Follow the instructions carefully.

By following these safety precautions, you can help to prevent accidents and injuries.

disassembling a Glock 17 is a relatively simple process that can be completed in a few minutes with the right tools. By following the steps outlined in this guide, you can safely and effectively disassemble your Glock 17 for cleaning, maintenance, or repairs.

Here are the key takeaways from this guide:

  • The Glock 17 is a striker-fired, semi-automatic pistol that is disassembled by locking the slide back and removing the trigger housing assembly.
  • To lock the slide back, press the slide stop lever down and pull the slide back until it stops.
  • To remove the trigger housing assembly, depress the trigger and turn the disassembly lever clockwise until it stops.
  • The trigger housing assembly can then be removed by pulling it straight up.
  • Once the trigger housing assembly is removed, the remaining components of the Glock 17 can be disassembled by following the steps in the guide.

By following these steps, you can safely and effectively disassemble your Glock 17 for cleaning, maintenance, or repairs.

Similar Posts