How To Assemble Ar 15?

ByBuffalo Rifles Blog

How to Assemble an AR-15

The AR-15 is a popular rifle for a variety of reasons. It is lightweight, accurate, and easy to use. However, assembling an AR-15 can be a daunting task for first-timers. This guide will walk you through the process step-by-step, so you can have your AR-15 up and running in no time.

We’ll start with a brief overview of the AR-15’s parts. Then, we’ll go over each step of the assembly process in detail. By the end of this guide, you’ll be able to assemble your own AR-15 with confidence.

So, what are you waiting for? Let’s get started!

Step Instructions Image
1 Assemble the lower receiver
2 Install the bolt carrier group
3 Install the charging handle
4 Install the barrel
5 Install the handguard
6 Install the gas block and gas tube
7 Install the muzzle device

AR-15 Parts and Assembly Steps

The AR-15 is a semi-automatic rifle that is popular for its modular design and ease of use. It is a relatively simple firearm to assemble, but there are a few key steps that you need to follow in order to do it correctly.

List of AR-15 parts

The following is a list of the major parts of an AR-15:

  • Lower receiver: This is the main part of the rifle and houses the trigger assembly, magazine, and bolt carrier group.
  • Upper receiver: This is the part of the rifle that holds the barrel and gas system.
  • Barrel: This is the long, cylindrical tube that projects from the front of the upper receiver. It is responsible for propelling the bullet down the barrel.
  • Gas block: This is a small, cylindrical device that sits on top of the barrel and directs gas from the expanding propellant back into the action to cycle the bolt.
  • Gas tube: This is a small, thin tube that connects the gas block to the bolt carrier group.
  • Bolt carrier group: This is the part of the rifle that loads, fires, and extracts the cartridges.
  • Charging handle: This is the lever that is used to manually cycle the bolt.
  • Magazine: This is the device that holds the cartridges for the rifle.
  • Trigger assembly: This is the part of the rifle that controls the firing of the rifle.
  • Sights: These are the devices that are used to aim the rifle.

Assembly steps

The following is a step-by-step guide to assembling an AR-15:

1. Assemble the lower receiver.

1. Insert the trigger assembly into the lower receiver.
2. Insert the hammer and disconnector into the trigger assembly.
3. Insert the magazine catch into the lower receiver.
4. Insert the bolt catch into the lower receiver.
5. Insert the rear takedown pin into the lower receiver.
6. Insert the forward takedown pin into the lower receiver.

2. Assemble the upper receiver.

1. Insert the barrel into the upper receiver.
2. Insert the gas block onto the barrel.
3. Insert the gas tube into the gas block and upper receiver.
4. Insert the bolt carrier group into the upper receiver.
5. Insert the charging handle into the upper receiver.

3. Attach the handguard and sights.

1. Attach the handguard to the upper receiver.
2. Attach the sights to the upper receiver.

Tools and materials needed

The following tools and materials are needed to assemble an AR-15:

  • AR-15 lower receiver
  • AR-15 upper receiver
  • Barrel
  • Gas block
  • Gas tube
  • Bolt carrier group
  • Charging handle
  • Magazine
  • Trigger assembly
  • Hammer and disconnector
  • Magazine catch
  • Bolt catch
  • Rear takedown pin
  • Forward takedown pin
  • Handguard
  • Sights
  • AR-15 armorer’s wrench
  • AR-15 punch set
  • AR-15 cleaning kit

AR-15 Safety Precautions

When handling an AR-15, it is important to take all necessary safety precautions to avoid injury. The following are some general safety rules that should always be followed:

  • Never point the gun at anything you do not intend to shoot.
  • Keep the gun unloaded when not in use.
  • Be sure the gun is clear of ammunition before cleaning or performing maintenance.
  • Never dry fire the gun.
  • Use proper eye and ear protection when shooting.
  • Be aware of your surroundings and the potential for ricochets.
  • Follow all applicable gun laws and regulations.

In addition to these general safety rules, there are also some specific safety precautions that should be taken when handling an AR-15:

  • Be sure to use the correct ammunition for your AR-15.
  • Never use damaged or worn ammunition.
  • Be sure to properly maintain your AR-15.
  • Never modify your AR-15 without the proper knowledge and tools.
  • Be aware of the potential for overpressure and catastrophic failure.

By following these safety precautions, you can help to ensure that you stay safe when handling an AR-15.

The AR-15 is a powerful and versatile rifle, but it is important to understand how to assemble and use it safely. By following the steps in this guide, you can safely assemble your AR

AR-15 Maintenance and Cleaning

How to clean an AR-15

The AR-15 is a relatively simple firearm to clean, but it is important to do so regularly in order to keep it functioning properly and to prevent wear and tear. The following steps will show you how to clean an AR-15:

1. Disassemble the AR-15. This will make it easier to access all of the parts that need to be cleaned. To do this, follow these steps:

  • Remove the magazine.
  • Lock the bolt back.
  • Rotate the takedown pin located at the rear of the receiver to the right and remove it.
  • Pull the upper receiver away from the lower receiver.
  • Remove the bolt carrier group (BCG) from the upper receiver.
  • Remove the firing pin retaining pin and remove the firing pin.
  • Remove the extractor and spring.

2. Clean the exterior of the AR-15. Use a soft cloth or brush to remove any dirt, dust, or debris from the exterior of the rifle. Be careful not to damage the finish.

3. Clean the barrel. Use a bore brush and solvent to clean the inside of the barrel. Be sure to work the brush back and forth in order to remove all of the fouling.

4. Clean the bolt carrier group. Use a brush and solvent to clean the inside of the bolt carrier group. Be sure to remove all of the carbon and other debris.

5. Lubricate the AR-15. Once the rifle is clean, apply a light coat of oil to all of the moving parts. This will help to prevent rust and keep the rifle functioning smoothly.

How to maintain an AR-15

In addition to cleaning your AR-15 regularly, there are a few other things you can do to maintain it:

  • Store your AR-15 in a dry, cool place.
  • Avoid exposing your AR-15 to extreme heat or cold.
  • Use high-quality ammunition.
  • Have your AR-15 inspected by a qualified gunsmith every few years.

By following these tips, you can help to keep your AR-15 in good condition and ensure that it is always ready to use.

AR-15 Modifications

Types of AR-15 modifications

There are a wide variety of modifications that can be made to an AR-15, including:

  • Stocks: Stocks can be changed to change the overall length of the rifle, the weight, and the way the rifle feels when it is fired.
  • Handguards: Handguards can be changed to improve the ergonomics of the rifle and to provide a more comfortable grip.
  • Barrels: Barrels can be changed to change the caliber of the rifle, the length of the barrel, and the accuracy of the rifle.
  • Trigger groups: Trigger groups can be changed to improve the trigger pull and the overall performance of the rifle.
  • Sights: Sights can be changed to improve the accuracy of the rifle and to make it easier to aim.
  • Magazines: Magazines can be changed to increase the capacity of the rifle or to change the type of ammunition that is used.

How to make modifications to an AR-15

Most AR-15 modifications can be made by a qualified gunsmith, but some modifications can be made by the end user. The following steps will show you how to make some common AR-15 modifications:

1. Changing the stock: To change the stock on an AR-15, you will need to remove the old stock and install the new stock. To remove the old stock, you will need to:

  • Remove the rear takedown pin.
  • Pull the upper receiver away from the lower receiver.
  • Remove the stock retaining pin.
  • Remove the old stock.

To install the new stock, you will need to:

  • Insert the new stock into the lower receiver.
  • Insert the stock retaining pin.
  • Push the upper receiver back onto the lower receiver.
  • Insert the rear takedown pin.

2. Changing the handguard: To change the handguard on an AR-15, you will need to remove the old handguard and install the new handguard. To remove the old handguard, you will need to:

  • Remove the barrel nut.
  • Remove the handguard.

To install the new handguard, you will need to:

  • Install the barrel nut.
  • Install the

Similar Posts