How To Remove Ar 15 Stock?
How to Remove an AR-15 Stock
The AR-15 is a popular rifle for both hunting and self-defense. It’s a versatile firearm that can be used in a variety of situations. However, one of the most common modifications that AR-15 owners make is to change the stock.
There are a few reasons why you might want to remove the stock from your AR-15. You might want to replace it with a different stock, or you might need to remove it for cleaning or maintenance. Whatever the reason, it’s important to know how to do it properly.
In this article, we’ll show you how to remove the stock from an AR-15. We’ll also provide some tips on how to choose the right stock for your rifle.
So, if you’re ready to learn how to remove an AR-15 stock, keep reading!
| Step | Instructions | Image |
|---|---|---|
| 1 | Lock the bolt back and release the magazine. |  |
| 2 | Locate the two roll pins on the rear of the receiver. |  |
| 3 | Using a punch, drive out the roll pins. |  |
| 4 | Grasp the stock and pull it forward and off of the receiver. |  |
3. Remove the AR-15 takedown pin
The takedown pin is a small, spring-loaded pin that connects the upper and lower receivers of an AR-15. To remove the takedown pin, you will need a small punch or a flathead screwdriver.
1. With the AR-15 pointed in a safe direction, remove the magazine.
2. Lock the bolt back by pulling back on the charging handle and then releasing it.
3. Locate the takedown pin located at the rear of the lower receiver, just above the magazine well.
4. Insert the punch or screwdriver into the hole in the takedown pin and depress the spring-loaded plunger.
5. While holding the plunger depressed, use the punch or screwdriver to push the takedown pin out of the receiver.
6. The takedown pin will come out of the receiver and the upper and lower receivers will be separated.
4. Remove the AR-15 bolt catch
The bolt catch is a small, lever-like device that prevents the bolt from going forward when the magazine is empty. To remove the bolt catch, you will need a small punch or a flathead screwdriver.
1. With the AR-15 pointed in a safe direction, remove the magazine.
2. Lock the bolt back by pulling back on the charging handle and then releasing it.
3. Locate the bolt catch located on the right side of the lower receiver, just behind the magazine well.
4. Insert the punch or screwdriver into the hole in the bolt catch and depress the spring-loaded plunger.
5. While holding the plunger depressed, use the punch or screwdriver to push the bolt catch out of the receiver.
6. The bolt catch will come out of the receiver and the bolt will be able to go forward freely.
Removing the AR-15 takedown pin and bolt catch is a simple process that can be completed in a few minutes. By following these steps, you can safely and easily disassemble your AR-15 for cleaning or maintenance.
How do I remove an AR-15 stock?
1. Ensure that the rifle is unloaded and the safety is on.
2. Locate the two takedown pins on the rear of the receiver.
3. Using a punch or other small, pointed object, depress the takedown pins until they are flush with the receiver.
4. Grasp the rear of the stock and pull it forward and down until it is free from the receiver.
What tools do I need to remove an AR-15 stock?
You will need a punch or other small, pointed object to depress the takedown pins.
Can I remove an AR-15 stock without tools?
It is possible to remove an AR-15 stock without tools, but it is difficult and not recommended. If you do not have access to tools, you can try using a coin or other small, flat object to depress the takedown pins.
What if my AR-15 stock is stuck?
If your AR-15 stock is stuck, you can try using a lubricant to loosen it. You can also try applying heat to the stock to expand it slightly. If these methods do not work, you may need to take the rifle to a gunsmith for assistance.
How do I put an AR-15 stock back on?
1. Ensure that the rifle is unloaded and the safety is on.
2. Align the stock with the receiver and insert the two takedown pins.
3. Depress the takedown pins until they are flush with the receiver.
4. Grasp the rear of the stock and pull it rearward and up until it is fully seated on the receiver.
What are the different types of AR-15 stocks?
There are many different types of AR-15 stocks available, each with its own unique features. Some of the most common types of AR-15 stocks include:
- Fixed stocks
- Folding stocks
- Telescoping stocks
- Adjustable stocks
- Padded stocks
- Minimalist stocks
Which type of AR-15 stock is best for me?
The best type of AR-15 stock for you will depend on your individual needs and preferences. Some factors to consider when choosing a stock include:
- Your shooting style
- Your build
- Your budget
How do I choose the right AR-15 stock for my build?
When choosing a stock for your AR-15 build, you will need to consider the following factors:
- The length of your build
- The type of shooting you will be doing
- Your personal preferences
How do I install an AR-15 stock?
To install an AR-15 stock, you will need to:
1. Ensure that the rifle is unloaded and the safety is on.
2. Remove the old stock by depressing the two takedown pins and pulling the stock off of the receiver.
3. Align the new stock with the receiver and insert the two takedown pins.
4. Depress the takedown pins until they are flush with the receiver.
5. Grasp the rear of the stock and pull it rearward and up until it is fully seated on the receiver.
In this comprehensive guide, we have discussed how to remove an AR-15 stock in detail. We have covered the different types of AR-15 stocks, the tools and materials you will need, and the steps involved in the removal process. We have also provided tips and tricks to help you complete the task safely and efficiently.
We hope that this guide has been helpful and that you are now able to remove your AR-15 stock with ease. If you have any questions or concerns, please do not hesitate to contact us.