How to Make a DIY Shoulder Holster (Easy Tutorial)
How to Make a Shoulder Holster
A shoulder holster is a type of holster that is worn around the shoulder and across the chest. It is typically used to carry a handgun, and can be a convenient and comfortable way to keep your firearm close at hand.
If you’re looking for a way to carry your handgun discreetly and securely, a shoulder holster may be a good option for you. In this article, we will show you how to make your own shoulder holster. We’ll provide step-by-step instructions, and we’ll also discuss the materials and tools you’ll need.
So if you’re ready to learn how to make a shoulder holster, read on!
| Step | Materials | Instructions |
|---|---|---|
| 1 |
|
|
| 2 |
|
|
A shoulder holster is a type of holster that is worn on the shoulder, typically with the gun positioned in the center of the back. Shoulder holsters are a popular choice for concealed carry, as they are relatively comfortable to wear and can be concealed under a jacket or coat.
This tutorial will show you how to make a simple shoulder holster from scratch. The materials and tools required are minimal, and the construction is relatively straightforward.
Materials and Tools
- Fabric (1 yard of 100% cotton canvas)
- Thread (matching the fabric)
- Needle
- Gun (for fitting the holster)
- Holster pattern (optional)
- Sewing machine (optional)
Steps
1. Cut out the fabric.
To make a shoulder holster, you will need to cut out two pieces of fabric: the front panel and the back panel. The front panel should be the same size as the gun, plus 1 inch for seam allowances. The back panel should be 1 inch wider and 2 inches longer than the front panel.
2. Sew the front and back panels together.
With right sides together, sew the front and back panels together along the top and side edges, using a 1/2-inch seam allowance. Leave the bottom edge open.
3. Turn the holster right side out.
Turn the holster right side out, using a point turner or other blunt object to help push out the corners.
4. Press the holster.
Press the holster flat, making sure to press the seams open.
5. Add the belt loops.
If you are using a belt loop pattern, cut out two belt loops from the fabric. If you are not using a pattern, you can cut out two 2-inch-wide by 3-inch-long strips of fabric.
Sew the belt loops to the front panel of the holster, 1 inch from the top edge and 1 inch from the side edges.
6. Add the belt.
Thread the belt through the belt loops.
7. Adjust the holster.
Put the holster on and adjust the fit. You may need to make adjustments to the length of the belt or the position of the belt loops.
8. Wear and enjoy your new shoulder holster!
Your shoulder holster is now complete. Wear it and enjoy your new way to carry your gun.
A shoulder holster is a great way to conceal carry your gun. It is comfortable to wear and can be concealed under a jacket or coat. This tutorial showed you how to make a simple shoulder holster from scratch. The materials and tools required are minimal, and the construction is relatively straightforward. With a little effort, you can make your own shoulder holster and enjoy the benefits of concealed carry.
3.Cut out the fabric pieces according to the pattern.
Once you have printed out the pattern, you will need to cut out the fabric pieces according to the markings. It is important to make sure that you cut out all of the pieces accurately, as this will ensure that the holster fits properly.
To cut out the fabric pieces, you will need to use a sharp pair of scissors. Place the pattern piece on top of the fabric and trace around it with a pencil. Then, use the scissors to cut out the fabric along the traced line.
It is important to note that you will need to cut out two of each fabric piece, as you will need one piece for the front of the holster and one piece for the back.
4.Sew the pieces together along the marked lines.
Once you have cut out all of the fabric pieces, you will need to sew them together along the marked lines. It is important to make sure that you sew the pieces together carefully, as this will ensure that the holster is strong and durable.
To sew the pieces together, you will need to use a sewing machine. Place the two pieces of fabric together with the right sides facing each other. Then, use the sewing machine to sew along the marked lines.
It is important to note that you will need to leave a small opening in the holster so that you can turn it inside out. Once you have sewn the pieces together, you can turn the holster inside out and press it flat.
Now that you have finished making your shoulder holster, you can enjoy using it for years to come. It is a great way to carry your firearm safely and securely, and it is also a stylish way to accessorize your outfit.
How to Make a Shoulder Holster?
Q: What materials do I need?
A: You will need the following materials:
- A piece of leather or fabric that is at least 12 inches wide and 24 inches long
- A belt clip
- A D-ring
- A needle and thread
- A sewing machine (optional)
Q: What are the steps involved in making a shoulder holster?
A: The steps involved in making a shoulder holster are as follows:
1. Cut out the pieces of leather or fabric according to the pattern.
2. Sew the pieces together, leaving a small opening for turning.
3. Turn the holster right side out and press.
4. Sew the opening closed.
5. Attach the belt clip and D-ring to the holster.
Q: What are some tips for making a shoulder holster?
A: Here are some tips for making a shoulder holster:
- Use a heavy-duty fabric or leather for durability.
- Make sure the holster is the right size for your gun.
- Use a strong thread and a sewing machine (if possible) for a more secure hold.
- Test the holster before using it to make sure it is comfortable and secure.
Q: What are some common mistakes people make when making a shoulder holster?
A: Some common mistakes people make when making a shoulder holster include:
- Using a lightweight fabric or leather that is not durable enough.
- Making the holster too small or too big for the gun.
- Not using a strong thread or a sewing machine (if possible).
- Not testing the holster before using it.
Q: What are some of the benefits of making your own shoulder holster?
A: There are many benefits to making your own shoulder holster, including:
- You can customize the holster to fit your gun and your body.
- You can make the holster out of high-quality materials that will last.
- You can save money by making your own holster.
Q: Where can I find more information on making a shoulder holster?
A: There are many resources available online and in libraries that can help you learn how to make a shoulder holster. Here are a few helpful links:
- [How to Make a Shoulder Holster](https://www.instructables.com/id/How-to-Make-a-Shoulder-Holster/)
- [DIY Shoulder Holster Tutorial](https://www.thesprucecrafts.com/diy-shoulder-holster-tutorial-4171025)
- [How to Make a Leather Shoulder Holster](https://www.leatherworking.com/articles/how-to-make-a-leather-shoulder-holster/)
In this tutorial, we have shown you how to make a shoulder holster. We started by discussing the materials and tools you will need. Then, we walked you through the steps of making the holster, from cutting out the fabric to sewing it together. Finally, we gave you some tips on how to wear and care for your new holster.
We hope that you found this tutorial helpful. If you have any questions, please leave them in the comments below. And be sure to check out our other tutorials for more DIY projects.
Here are some key takeaways from this tutorial:
- Shoulder holsters are a great way to carry a concealed firearm.
- They are comfortable to wear and allow for quick access to your gun.
- You can make a shoulder holster at home with a few simple materials and tools.
- Be sure to follow the steps in the tutorial carefully to make a holster that is both functional and stylish.