How to Remove a Brace from an AR Pistol: A Step-by-Step Guide

ByBuffalo Rifles Blog

How to Remove a Brace from an AR Pistol

AR pistols are a popular choice for self-defense and home defense, but they can be difficult to use if the brace is not properly installed. In this article, we will show you how to remove a brace from an AR pistol in a few simple steps.

Step 1: Remove the rear takedown pin

The first step is to remove the rear takedown pin. This is a small pin located at the back of the receiver. To remove it, use a small punch or a flathead screwdriver to push it out from the left side.

Step 2: Rotate the upper receiver

Once the rear takedown pin is removed, you can rotate the upper receiver up and off of the lower receiver. To do this, simply grasp the rear of the upper receiver and pull it up and away from the lower receiver.

Step 3: Remove the buffer tube

The next step is to remove the buffer tube. The buffer tube is a long, cylindrical tube that connects the upper receiver to the lower receiver. To remove it, use a wrench to loosen the castle nut at the end of the buffer tube. Once the castle nut is loose, you can slide the buffer tube off of the receiver.

Step 4: Remove the brace

Now that the buffer tube is removed, you can easily remove the brace. The brace is a small, L-shaped piece of plastic that attaches to the buffer tube. To remove it, simply unclip the two plastic tabs on the side of the brace and slide it off of the buffer tube.

That’s it! You have now successfully removed the brace from your AR pistol. Reassembling the pistol is simply a matter of reversing these steps.

Additional Tips

  • If you are having trouble removing the rear takedown pin, you can try using a mallet to tap it out.
  • Be careful not to lose the small parts that come out of the receiver when you remove the upper receiver.
  • If you are not comfortable removing the brace from your AR pistol, you can take it to a qualified gunsmith.

    Step Instructions Image
    1 Ensure that the AR pistol is unloaded and the magazine is removed.
    2 Locate the two screws that secure the brace to the AR pistol.
    3 Use a screwdriver to loosen and remove the two screws.
    4 Carefully remove the brace from the AR pistol.

    How to Remove Brace From AR Pistol?

    Tools and Materials

    • AR pistol with a brace
    • AR-15 armorer’s wrench
    • AR-15 takedown pin
    • AR-15 buffer tube castle nut wrench
    • AR-15 buffer tube
    • AR-15 buffer spring
    • AR-15 buffer

    Step-by-Step Instructions

    1. Remove the pistol grip. To do this, you will need to use the AR-15 armorer’s wrench to loosen the castle nut on the back of the receiver. Once the castle nut is loose, you can use the takedown pin to remove the pistol grip.
    2. Remove the buffer tube. The buffer tube is held in place by the buffer tube castle nut. To remove the buffer tube, you will need to use the AR-15 buffer tube castle nut wrench to loosen the castle nut. Once the castle nut is loose, you can remove the buffer tube.
    3. Remove the buffer spring and buffer. The buffer spring and buffer are located inside the buffer tube. To remove them, you will need to use a small screwdriver or pick to depress the buffer retainer and then slide the buffer spring and buffer out of the buffer tube.
    4. Remove the brace. The brace is attached to the rear of the receiver with two screws. To remove the brace, you will need to use a Phillips head screwdriver to loosen the two screws. Once the screws are loosened, you can remove the brace.

    By following these steps, you can easily remove the brace from your AR pistol. This process is relatively simple and can be completed in a few minutes.

    How To Remove Brace From Ar Pistol?

    1. Preparation

    Before you can remove the brace from your AR pistol, you will need to gather a few tools. These include:

    • A flathead screwdriver
    • A punch
    • A hammer
    • A vice
    • Safety glasses

    Once you have gathered your tools, you can begin the removal process.

    2. Removing the Brace

    1. First, remove the stock from the AR pistol. To do this, you will need to disconnect the two takedown pins. These are located at the rear of the receiver, just above the trigger guard.
    2. Once the takedown pins are removed, the stock can be lifted up and removed from the receiver.
    3. Next, you will need to remove the buffer tube from the receiver. To do this, you will need to use a punch to drive out the roll pin that secures the buffer tube to the receiver.
    4. Once the roll pin is removed, the buffer tube can be unscrewed from the receiver.
    5. Now that the buffer tube is removed, you can access the brace. To remove the brace, you will need to use a flathead screwdriver to pry off the two plastic caps that cover the screws that secure the brace to the receiver.
    6. Once the plastic caps are removed, you can use a screwdriver to unscrew the two screws that secure the brace to the receiver.
    7. Once the screws are removed, the brace can be lifted up and removed from the receiver.

    3. Troubleshooting

    If you are having trouble removing the brace from your AR pistol, there are a few things you can check. First, make sure that you have the correct tools. You will need a flathead screwdriver, a punch, a hammer, and a vice. Second, make sure that you are following the steps in the correct order. Third, make sure that you are using enough force. If you are still having trouble, you can contact a qualified gunsmith for assistance.

    4. Additional Resources

    Here are some additional resources that you may find helpful:

    • [How to Remove a Brace from an AR Pistol](https://www.pewpewtactical.com/how-to-remove-a-brace-from-an-ar-pistol/)
    • [AR-15 Brace Removal Guide](https://www.ar15.com/forums/ar-15/AR-15-Brace-Removal-Guide-/17-291021/)
    • [How to Remove a Brace from an AR Pistol (Video)](https://www.youtube.com/watch?v=803_1-_332k)

      How do I remove a brace from an AR pistol?

    1. Ensure that the firearm is unloaded and safe to work on.
    2. Locate the two screws that secure the brace to the receiver.
    3. Use a screwdriver to loosen and remove the screws.
    4. Carefully remove the brace from the receiver.

    What tools do I need to remove a brace from an AR pistol?

    You will need a screwdriver to remove a brace from an AR pistol.

    Can I remove a brace from an AR pistol without tools?

    It is possible to remove a brace from an AR pistol without tools, but it is not recommended. Using tools will make the process easier and less likely to damage the firearm.

    What is the difference between a brace and a stock?

    A brace is a device that is attached to the rear of a firearm and helps to stabilize the firearm while firing. A stock is a device that is attached to the rear of a firearm and provides a shoulder rest for the shooter.

    **Is it legal to remove a brace from an AR pistol?

    It is legal to remove a brace from an AR pistol as long as the firearm is still in compliance with all applicable laws.

    **What are the benefits of removing a brace from an AR pistol?

    There are a few benefits to removing a brace from an AR pistol, including:

    • The firearm will be more compact and easier to carry.
    • The firearm will be lighter in weight.
    • The firearm will be less likely to be classified as a short-barreled rifle (SBR).

    **What are the risks of removing a brace from an AR pistol?

    There are a few risks to removing a brace from an AR pistol, including:

    • The firearm may be less stable and easier to lose control of while firing.
    • The firearm may be more difficult to aim accurately.
    • The firearm may be more likely to cause injury to the shooter or bystanders.

    **Should I remove a brace from my AR pistol?

    Whether or not you should remove a brace from your AR pistol is a personal decision. You should weigh the benefits and risks of removing the brace and make the decision that is best for you.

    removing a brace from an AR pistol is a simple process that can be completed in a few minutes. By following the steps outlined in this guide, you can safely and effectively remove the brace from your AR pistol without damaging the firearm.

    Here are some key takeaways from this guide:

    • AR pistols are classified as pistols, not rifles, and therefore do not require a tax stamp or other federal registration.
    • AR pistol braces are designed to help stabilize the firearm while firing, but they do not turn the pistol into a rifle.
    • Removing a brace from an AR pistol is a simple process that can be completed in a few minutes.
    • By following the steps outlined in this guide, you can safely and effectively remove the brace from your AR pistol without damaging the firearm.

Similar Posts